AFE20408
- Eight analog outputs
- Eight monotonic DACs: 1.22mV resolution
- Automatically configured output ranges:
- Positive output voltage: 0V to 10V
- Negative output voltage: –10V to 0V
- High current drive capability
- High capacitive load tolerance
- Output on and off control switches
- Fast switching time
- Low resistance
- Multichannel ADC monitor
- Two high-voltage external inputs: 0V to 85V
- Two high-side current-sense amplifiers: up to 85V common mode range
- Local temperature sensor: ±2.5°C error
- Output sequence control for start-up and shutdown events
- Internal 2.5V reference
- SPI and I2C interface: 1.65V to 3.6V operation
- SPI: 4-wire interface
- I2C: 16 target addresses
- Specified temperature range: –40°C to +125°C
- Operating temperature range –55°C to +150°C
The AFE20408 is a highly integrated power-amplifier (PA) monitor and control device capable of temperature, current, and voltage supervision.
The AFE20408 bias controller is based around eight digital-to-analog converters (DACs) with programmable output ranges. The eight gate bias outputs are switched on and off through dedicated control pins. The gate bias switches are designed for fast response and enable correct power sequencing and protection of depletion-mode transistors, such as GaAs and GaN.
The AFE20408 supervisor is based around an accurate multichannel analog-to-digital converter (ADC). The device integrates two high-voltage inputs, two high-side current-sense amplifiers and an accurate on-chip temperature sensor.
The function integration and wide operating temperature range make the AFE20408 an excellent choice as an all-in-one, bias control circuit for power amplifiers. The flexible DAC output ranges and built-in sequencing features let the device be used as a biasing controller for a large variety of transistor technologies, such as LDMOS, GaAs, and GaN.
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | AFE20408 8-Channel Power-Amplifier Monitor and Controller 数据表 | PDF | HTML | 2024年 4月 5日 | ||
应用手册 | 在航天和国防应用中偏置 GaN 和 LDMOS 射频功率放大器 | PDF | HTML | 英语版 | PDF | HTML | 2024年 4月 1日 | |
EVM 用户指南 | AFE20408 评估模块 (Rev. B) | PDF | HTML | 英语版 (Rev.B) | PDF | HTML | 2024年 2月 22日 | |
证书 | AFE20408EVM EU Declaration of Conformity (DoC) | 2023年 11月 14日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
AFE20408EVM — AFE20408 评估模块
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
封装 | 引脚 | 下载 |
---|---|---|
VQFN (RHB) | 32 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点