主页 数据转换器 集成型和特殊功能数据转换器 集成型精密 ADC 和 DAC
主页
数据转换器
集成型和特殊功能数据转换器
集成型精密 ADC 和 DAC

AFE10004

正在供货

具有 EEPROM 和输出开关的 4 通道功率放大器监视器和控制器

立即订购
数据表

AFE10004

正在供货
数据表 立即订购

产品详情

Number of DAC channels 4 DAC resolution (Bps) 13 Temperature sensing Local, Remote Interface type I2C, SPI Features Built-in sequencing control, EEPROM, High current drive capability Operating temperature range (°C) -40 to 125 Rating Catalog DAC output full-scale (min) (V) -10 DAC output full-scale (max) (V) 10
Number of DAC channels 4 DAC resolution (Bps) 13 Temperature sensing Local, Remote Interface type I2C, SPI Features Built-in sequencing control, EEPROM, High current drive capability Operating temperature range (°C) -40 to 125 Rating Catalog DAC output full-scale (min) (V) -10 DAC output full-scale (max) (V) 10
VQFN (RGE) 24 16 mm² 4 x 4
  • Local and remote diode temperature sensor
    • ±2.5°C accuracy, maximum
    • 0.0625°C resolution
  • Internal EEPROM for autonomous operation
    • Four independent transfer functions storage
    • Device configuration storage
    • Open space for user storage
  • Four analog outputs
    • Four monotonic DACs: 1.22-mV resolution
    • Automatically configured output ranges:
      • Positive output voltage: 5.5 V, maximum
      • Negative output voltage: –10 V, minimum
    • High current drive capability:
      • Source up to 100 mA
      • Sink up to 20 mA
    • High capacitive load tolerant: up to 15 µF
  • Gate bias on and off control switches
    • Two programmable off voltages
      • Two auxiliary DACs: 1.22-mV resolution
    • Fast switching time: 50 ns, typical
    • Low resistance: 3 Ω, maximum
  • Built-in sequencing control
  • Internal 2.5-V reference
  • SPI and I2C interfaces: 1.7-V to 3.6-V operation
    • SPI: 4-wire Interface
    • I2C: Eight selectable slave addresses
  • Specified temperature range: –40°C to +125°C
  • Operating temperature range –40°C to +150°C
  • Local and remote diode temperature sensor
    • ±2.5°C accuracy, maximum
    • 0.0625°C resolution
  • Internal EEPROM for autonomous operation
    • Four independent transfer functions storage
    • Device configuration storage
    • Open space for user storage
  • Four analog outputs
    • Four monotonic DACs: 1.22-mV resolution
    • Automatically configured output ranges:
      • Positive output voltage: 5.5 V, maximum
      • Negative output voltage: –10 V, minimum
    • High current drive capability:
      • Source up to 100 mA
      • Sink up to 20 mA
    • High capacitive load tolerant: up to 15 µF
  • Gate bias on and off control switches
    • Two programmable off voltages
      • Two auxiliary DACs: 1.22-mV resolution
    • Fast switching time: 50 ns, typical
    • Low resistance: 3 Ω, maximum
  • Built-in sequencing control
  • Internal 2.5-V reference
  • SPI and I2C interfaces: 1.7-V to 3.6-V operation
    • SPI: 4-wire Interface
    • I2C: Eight selectable slave addresses
  • Specified temperature range: –40°C to +125°C
  • Operating temperature range –40°C to +150°C

The AFE10004 is a highly integrated, autonomous, power-amplifier (PA) precision analog front end (AFE) that includes four temperature compensation digital-to-analog converters (DACs), integrated EEPROM, and gate bias switches. The four DACs are programmed by four, independent, user-defined, temperature-to-voltage transfer functions stored in the internal EEPROM, allowing any temperature effects to be corrected without additional external circuitry. After start up, the device operates without intervention from a system controller to provide a complete system for setting and compensating bias voltages in control applications.

The AFE10004 has four gate bias outputs that are switched on and off through dedicated control pins. The gate bias switches are designed for fast response. In combination with the device PA_ON pin, this fast response enables correct power sequencing and protection of depletion-mode transistors, such as GaAs and GaN.

The function integration and wide operating temperature range make the AFE10004 an excellent choice as an all-in-one, autonomous bias control circuit for the power amplifiers found in RF systems. The flexible DAC output ranges and built-in sequencing features let the device be used as a biasing controller for a large variety of transistor technologies, such as LDMOS, GaAs, and GaN. Contact TI sales for the full data sheet.

The AFE10004 is a highly integrated, autonomous, power-amplifier (PA) precision analog front end (AFE) that includes four temperature compensation digital-to-analog converters (DACs), integrated EEPROM, and gate bias switches. The four DACs are programmed by four, independent, user-defined, temperature-to-voltage transfer functions stored in the internal EEPROM, allowing any temperature effects to be corrected without additional external circuitry. After start up, the device operates without intervention from a system controller to provide a complete system for setting and compensating bias voltages in control applications.

The AFE10004 has four gate bias outputs that are switched on and off through dedicated control pins. The gate bias switches are designed for fast response. In combination with the device PA_ON pin, this fast response enables correct power sequencing and protection of depletion-mode transistors, such as GaAs and GaN.

The function integration and wide operating temperature range make the AFE10004 an excellent choice as an all-in-one, autonomous bias control circuit for the power amplifiers found in RF systems. The flexible DAC output ranges and built-in sequencing features let the device be used as a biasing controller for a large variety of transistor technologies, such as LDMOS, GaAs, and GaN. Contact TI sales for the full data sheet.
open-in-new 查找其他 集成型精密 ADC 和 DAC
下载 观看带字幕的视频 视频
Information

申请了解更多信息

可提供完整数据表和其他设计资源。立即申请

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索，并重试。
查看全部 2
类型 项目标题 下载最新的英语版本 日期
* 数据表 AFE10004 4-Channel Power-Amplifier Precision Analog Front End With Integrated EEPROM and Gate Bias Switches 数据表 PDF | HTML 2020年 12月 8日
应用手册 Temperature Compensation of Power Amplifier FET Bias Voltages PDF | HTML 2021年 4月 29日

设计和开发

如需其他信息或资源，请查看下方列表，点击标题即可进入详情页面。

模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
封装 引脚数 下载
VQFN (RGE) 24 了解详情
应遵守 TI 的评估模块标准条款与条件.

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 认证摘要
  • 持续可靠性监测

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持与培训

视频