SNLU298 August   2021 DS320PR810

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Features
    2. 1.2 Applications
  3. 2Description
    1. 2.1 DS320PR810 5-Level I/O Control Inputs
    2. 2.2 DS320PR810 Modes of Operation
    3. 2.3 DS320PR810 SMBus or I2C Register Control Interface
    4. 2.4 DS320PR810 Equalization Control
    5. 2.5 DS320PR810-SMP-EVM Controls
    6. 2.6 Quick-Start Guide (Pin Mode)
    7. 2.7 Quick-Start Guide (SMBus Slave Mode)
  4. 3Schematics
  5. 4Board Layout
  6. 5Bill of Materials
  7. 6References

DS320PR810 Equalization Control

Each channel of the DS320PR810 features a continuous-time linear equalizer (CTLE) that applies high-frequency boost and low-frequency attenuation to help equalize the frequency-dependent insertion loss effects of the passive channel. Table 2-4 shows available equalization boost through EQ control pins (EQ1_0 and EQ0_0 for channels 0–3 and EQ1_1 and EQ0_1 for channels 4–7) when in Pin Control mode (MODE = L0).

Table 2-4 Equalization Control Settings
EQ INDEXEQ1 PIN LEVELEQ0 PIN LEVELCTLE BOOST AT 8GHz (dB)CTLE BOOST AT 16GHz (dB)
0L0L0Refer

to data sheet

Refer

to data sheet

1L0L1
2L0L2
3L0L3
4L0L4
5L1L0
6L1L1
7L1L2
8L1L3
9L1L4
10L2L0
11L2L1
12L2L2
13L2L3
14L2L4
15L3L0
16L3L1
17L3L2
18L3L3
19L3L4

The equalization gain of each channel of each device can also be set by writing to SMBus, I2C registers in I2C Mode.