SLUUCO3A May   2022  – December 2022 TPS4811-Q1

 

  1.   TPS48110Q1EVM: Evaluation Module for Smart High-Side Driver TPS48110-Q1
  2.   Trademarks
  3. 1Introduction
    1. 1.1 EVM Features
    2. 1.2 EVM Applications
  4. 2Description
  5. 3Schematic
  6. 4General Configurations
    1. 4.1 Physical Access
    2. 4.2 Test Equipment and Setup
      1. 4.2.1 Power Supplies
      2. 4.2.2 Meters
      3. 4.2.3 Oscilloscope
      4. 4.2.4 Loads
  7. 5Test Setup and Procedures
    1. 5.1 Power Up with EN Control
    2. 5.2 ON and OFF Control with INP Input
    3. 5.3 Overcurrent Protection Test
    4. 5.4 Overvoltage Protection Test
  8. 6EVAL Board Assembly Drawings
    1. 6.1 PCB Drawings
  9. 7Bill of Materials (BoM)
  10. 8Revision History

6.1 PCB Drawings

Figure 6-1 shows component placement of the EVAL Board, and Figure 6-2 and Figure 6-3 show PCB layout images.

Figure 6-1 TPS48110Q1EVM Board (a) Top Assembly (b) Bottom Assembly
Figure 6-2 TPS48110Q1EVM Board (a) Top Layer (b) Bottom Layer
Figure 6-3 TPS48110Q1EVM Board (a) Inner Signal Layer (b) Inner Routing Layer