SLAU780 August   2018

 

  1.   MSP432E411Y-BGAEVM User's Guide
    1.     Trademarks
    2. 1 Board Overview
    3. 2 Power the MSP432E411Y-BGAEVM
      1. 2.1 Emulator Power
      2. 2.2 External 3.3-V Source Only
      3. 2.3 External 5-V Source Only
      4. 2.4 External 3.3-V and 5-V Source
      5. 2.5 Measure Current Consumption
    4. 3 Header Pinouts and Connections
      1. 3.1 J11 – External Power Connector
      2. 3.2 J6 – Power Rail Header
      3. 3.3 J7 – External Peripheral Interface Header
      4. 3.4 LCD Interface Header
      5. 3.5 J1, J2, J3, J4 – BoosterPack Interface Headers
      6. 3.6 J5 – Additional GPIO Pin Header
    5. 4 Communication Interfaces
      1. 4.1 Ethernet
      2. 4.2 USB-OTG
    6. 5 Programming Interfaces
      1. 5.1 JTAG
      2. 5.2 ETM Trace
      3. 5.3 BSL
    7. 6 Software Development
      1. 6.1 Software Description
      2. 6.2 Source Code
      3. 6.3 Tool Options
    8. 7 Schematics

2.3 External 5-V Source Only

To use an external 5-V source to power the EVM, connect the 5-V and GND lines of the supply to the 5V and GND pins of the external power header (J11) or to the 5V pin on the BoosterPack header (J3). Connect the onboard 3.3-V LDO (U5) to the 3.3-V power rail by populating the jumper on JP8 to connect the output of the LDO to the 3.3-V power rail. Figure 2 shows the location for JP8.