SLLSFC3A March   2020  – December 2021 ISO1640-Q1

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Power Ratings
    6.     Insulation Specifications
    7. 6.6  Safety-Related Certifications
    8. 6.7  Safety Limiting Values
    9. 6.8  Electrical Characteristics
    10. 6.9  Supply Current Characteristics
    11. 6.10 Timing Requirements
    12. 6.11 Switching Characteristics
    13. 6.12 Insulation Characteristics Curves
    14. 6.13 Typical Characteristics
  7. 7 Parameter Measurement Information
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagrams
    3. 8.3 Isolation Technology Overview
    4. 8.4 Feature Description
      1. 8.4.1 Hot Swap
      2. 8.4.2 Protection Features
    5. 8.5 Isolator Functional Principle
      1. 8.5.1 Receive Direction (Left Diagram of Figure 1-1 )
      2. 8.5.2 Transmit Direction (Right Diagram of Figure 1-1 )
    6. 8.6 Device Functional Modes
  9. 9 Application and Implementation
    1. 9.1 Application Information
      1. 9.1.1 I2C Bus Overview
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
    3. 9.3 Insulation Lifetime
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
      1. 11.1.1 PCB Material
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Support Resources
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

6.11 Switching Characteristics

over recommended operating conditions, unless otherwise noted
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
2.25 V ≤ VCC2 ≤ 2.75 V, 3 V ≤ VCC1 ≤ 3.6 V
tf2 Output signal fall time
(SDA2 and SCL2)		 0.7 × VCC2 ≥ VO ≥ 0.3 × VCC2, R2 = 72 Ω,
C2 = 400 pF, see Figure 7-1		 16 26.5 40 ns
0.9 × VCC2 ≥ VO ≥ 400 mV, R2 = 72Ω,
C2 = 400 pF, see Figure 7-1		 38 53.3 78
tpLH1-2 Low-to-high propagation delay, side 1 to side 2 VI = 535 mV, VO = 0.7 × VCC2, R1 = 953 Ω, R2 = 72 Ω, C1 and C2 = 10 pF, VCC1 = 3.3 V, see Figure 7-1 20 30 ns
tpHL1-2 High-to-low propagation delay, side 1 to side 2 VI = 550 mV, VO = 0.3 × VCC2, R1 = 953 Ω, R2 = 72 Ω, C1 and C2 = 10 pF, VCC1 = 3.3 V, see Figure 7-1 80 130 ns
tpLH2-1 Low-to-high propagation delay, side 2 to side 1 VI = 0.4 x VCC2, VO = 0.7 x VCC1, R1 = 953 Ω, R2 = 72 Ω, C1 and C2 = 10 pF, VCC1 = 3.3 V, see Figure 7-1 40 48 ns
tpHL2-1 High-to-low propagation delay, side 2 to side 1 VI = 0.4 x VCC2, VO = 0.3 × VCC1, R1 = 953 Ω, R2 = 72 Ω, C1 and C2 = 10 pF, VCC1 = 3.3 V, see Figure 7-1 70 100 ns
PWD1-2 Pulse width distortion
|tpHL1-2 – tpLH1-2|		 R1 = 953 Ω, R2 = 72 Ω, C1 and C2 = 10 pF, VCC1 = 3.3 V
see Figure 7-1		 60 104 ns
PWD2-1 Pulse width distortion
|tpHL2-1 – tpLH2-1|		 R1 = 953 Ω, R2 = 72 Ω, C1 and C2 = 10 pF, VCC1 = 3.3 V
see Figure 7-1		 25 55 ns
tLOOP1 Round-trip propagation delay on side 1 0.4 V ≤ VI ≤ 0.3 × VCC1, R1 = 953 Ω,
C1 = 40 pF, R2 = 72 Ω, C2 = 400 pF, see Figure 7-1		 62 74 ns
3 V ≤ VCC1, VCC2 ≤ 3.6 V
tf1 Output signal fall time
(SDA1 and SCL1)		 0.7 × VCC1 ≥ VO ≥ 0.3 × VCC1, R1 = 953 Ω,
C1 = 40 pF, R2 = 95.3 Ω, C2 = 400 pF, see Figure 7-1		 8 17 29 ns
0.9 × VCC1 ≥ VO ≥ 900 mV, R1 = 953 Ω,
C1 = 40 pF, see Figure 7-1		 15 25 48
tf2 Output signal fall time
(SDA2 and SCL2)		 0.7 × VCC2 ≥ VO ≥ 0.3 × VCC2, R2 = 95.3 Ω,
C2 = 400 pF, see Figure 7-1		 14 23 47 ns
0.9 × VCC2 ≥ VO ≥ 400 mV, R2 = 95.3 Ω,
C2 = 400 pF, see Figure 7-1		 30 50 100
tpLH1-2 Low-to-high propagation delay, side 1 to side 2 VI = 535 mV, VO = 0.7 × VCC2, R1 = 953 Ω, R2 = 95.3 Ω, C1 and C2 = 10 pF, see Figure 7-1 21 29 ns
tpHL1-2 High-to-low propagation delay, side 1 to side 2 VI = 550 mV, VO = 0.3 × VCC2, R1 = 953 Ω, R2 = 95.3 Ω, C1 and C2 = 10 pF, see Figure 7-1 59 88 ns
tpLH2-1 Low-to-high propagation delay, side 2 to side 1 VI = 0.4 x VCC2, VO = 0.7 x VCC1, R1 = 953 Ω, R2 = 95.3 Ω, C1 and C2 = 10 pF, see Figure 7-1 40 47 ns
tpHL2-1 High-to-low propagation delay, side 2 to side 1 VI = 0.4 x VCC2, VO = 0.3 × VCC1, R1 = 953 Ω, R2 = 95.3 Ω, C1 and C2 = 10 pF, see Figure 7-1 70 100 ns
PWD1-2 Pulse width distortion
|tpHL1-2 – tpLH1-2|		 R1 = 953 Ω, R2 = 95.3 Ω, C1 and C2 = 10 pF,
see Figure 7-1		 39 61 ns
PWD2-1 Pulse width distortion
|tpHL2-1 – tpLH2-1|		 R1 = 953 Ω, R2 = 95.3 Ω, C1 and C2 = 10 pF,
see Figure 7-1		 25 48 ns
tLOOP1 Round-trip propagation delay on side 1 0.4 V ≤ VI ≤ 0.3 × VCC1, R1 = 953 Ω,
C1 = 40 pF, R2 = 95.3 Ω, C2 = 400 pF, see Figure 7-1		 65 78 ns
4.5 V ≤ VCC1, VCC2 ≤ 5.5 V
tf1 Output signal fall time
(SDA1 and SCL1)		 0.7 × VCC1 ≥ VO ≥ 0.3 × VCC1, R1 = 1430 Ω,
C1 = 40 pF, R2 = 95.3 Ω, C2 = 400 pF, see Figure 7-1		 6 16 22 ns
0.9 × VCC1 ≥ VO ≥ 900 mV, R1 = 1430 Ω,
C1 = 40 pF, see Figure 7-1		 13 32 48
tf2 Output signal fall time
(SDA2 and SCL2)		 0.7 × VCC2 ≥ VO ≥ 0.3 × VCC2, R2 = 143 Ω,
C2 = 400 pF, see Figure 7-1		 10 24 30 ns
0.9 × VCC2 ≥ VO ≥ 400 mV, R2 = 143 Ω,
C2 = 400 pF, see Figure 7-1		 28 48 76
tpLH1-2 Low-to-high propagation delay, side 1 to side 2 VI = 535 mV, VO = 0.7 × VCC2, R1 = 1430 Ω, R2 = 143 Ω, C1 and C2 = 10 pF, see Figure 7-1 21 28 ns
tpHL1-2 High-to-low propagation delay, side 1 to side 2 VI = 550 mV, VO = 0.3 × VCC2, R1 = 1430 Ω, R2 = 143 Ω, C1 and C2 = 10 pF, see Figure 7-1 51 70 ns
tpLH2-1 Low-to-high propagation delay, side 2 to side 1 VI = 0.4 x VCC2, VO = 0.7 x VCC1, R1 = 1430 Ω, R2 = 143 Ω, C1 and C2 = 10 pF, see Figure 7-1 51 57 ns
tpHL2-1 High-to-low propagation delay, side 2 to side 1 VI = 0.4 x VCC2, VO = 0.3 × VCC1, R1 = 1430 Ω, R2 = 143 Ω, C1 and C2 = 10 pF, see Figure 7-1 60 88 ns
PWD1-2 Pulse width distortion
|tpHL1-2 – tpLH1-2|		 R1 = 1430 Ω, R2 = 143 Ω, C1 and C2 = 10 pF,
see Figure 7-1		 30 45 ns
PWD2-1 Pulse width distortion
|tpHL2-1 – tpLH2-1|		 R1 = 1430 Ω, R2 = 143 Ω, C1 and C2 = 10 pF,
see Figure 7-1		 10 34 ns
tLOOP1 Round-trip propagation delay on side 1 0.4 V ≤ VI ≤ 0.3 × VCCI, R1 = 1430 Ω,
C1 = 40 pF, R2 = 143 Ω, C2 = 400 pF, see Figure 7-1		 84 96 ns