ZHCSDJ3C March   2015  – June 2019 DLPC150

PRODUCTION DATA.  

  1. 特性
  2. 应用
  3. 说明
    1.     Device Images
      1.      DLP 0.2 英寸 WVGA 芯片组
  4. 修订历史记录
  5. Pin Configuration and Functions
    1.     Pin Functions
    2. 5.1 DLPC150 Mechanical Data
      1. Table 1. I/O Type Subscript Definition
      2. Table 2. Internal Pullup and Pulldown Characteristics
  6. Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics Over Recommended Operating Conditions
    6. 6.6  Electrical Characteristics
    7. 6.7  High-Speed Sub-LVDS Electrical Characteristics
    8. 6.8  Low-Speed SDR Electrical Characteristics
    9. 6.9  System Oscillators Timing Requirements
    10. 6.10 Power-Up and Reset Timing Requirements
    11. 6.11 Parallel Interface Frame Timing Requirements
    12. 6.12 Parallel Interface General Timing Requirements
    13. 6.13 Flash Interface Timing Requirements
  7. Parameter Measurement Information
    1. 7.1 Host_irq Usage Model
    2. 7.2 Input Source
      1. 7.2.1 Parallel Interface Supports Two Data Transfer Formats
        1. 7.2.1.1 Pdata Bus – Parallel Interface Bit Mapping Modes
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Interface Timing Requirements
        1. 8.3.1.1 Parallel Interface
      2. 8.3.2 Serial Flash Interface
      3. 8.3.3 Serial Flash Programming
      4. 8.3.4 I2C Control Interface
      5. 8.3.5 DMD (Sub-LVDS) Interface
      6. 8.3.6 Calibration And Debug Support
      7. 8.3.7 DMD Interface Considerations
    4. 8.4 Device Functional Modes
  9. Application and Implementation
    1. 9.1 Application Information
      1. 9.1.1 DLPC150 System Design Consideration – Application Notes
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 DLPC150 System Interfaces
          1. 9.2.2.1.1 Control Interface
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
    1. 10.1 System Power-Up and Power-Down Sequence
    2. 10.2 DLPC150 Power-Up Initialization Sequence
    3. 10.3 DMD Fast Park Control (PARKZ)
    4. 10.4 Hot Plug Usage
    5. 10.5 Maximum Signal Transition Time
  11. 11Layout
    1. 11.1 Layout Guidelines
      1. 11.1.1 PCB Layout Guidelines For Internal Controller PLL Power
      2. 11.1.2 DLPC150 Reference Clock
        1. 11.1.2.1 Recommended Crystal Oscillator Configuration
      3. 11.1.3 General PCB Recommendations
      4. 11.1.4 General Handling Guidelines for Unused CMOS-Type Pins
      5. 11.1.5 Maximum Pin-to-Pin, PCB Interconnects Etch Lengths
      6. 11.1.6 Number of Layer Changes
      7. 11.1.7 Stubs
      8. 11.1.8 Terminations
      9. 11.1.9 Routing Vias
    2. 11.2 Layout Example
    3. 11.3 Thermal Considerations
  12. 12器件和文档支持
    1. 12.1 器件支持
      1. 12.1.1 器件命名规则
        1. 12.1.1.1 器件标记
    2. 12.2 相关链接
    3. 12.3 社区资源
    4. 12.4 商标
    5. 12.5 静电放电警告
    6. 12.6 Glossary
  13. 13"机械、封装和可订购信息
    1. 13.1 Package Option Addendum
      1. 13.1.1 Packaging Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)

DLPC150 Mechanical Data

DLPC150 DLPC150 Pinout.gifFigure 1. 13- × 13-mm Package – VF Ball Grid Array

Table 1. I/O Type Subscript Definition

I/O TYPE SUPPLY REFERENCE ESD STRUCTURE
SUBSCRIPT DESCRIPTION
1 1.8 LVCMOS I/O buffer with 8-mA drive Vcc18 ESD diode to GND and supply rail
2 1.8 LVCMOS I/O buffer with 4-mA drive Vcc18 ESD diode to GND and supply rail
3 1.8 LVCMOS I/O buffer with 24-mA drive Vcc18 ESD diode to GND and supply rail
4 1.8 sub-LVDS output with 4-mA drive Vcc18 ESD diode to GND and supply rail
5 1.8, 2.5, 3.3 LVCMOS with 4-mA drive Vcc_INTF ESD diode to GND and supply rail
6 1.8 LVCMOS input Vcc18 ESD diode to GND and supply rail
7 1.8-, 2.5-, 3.3-V I2C with 3-mA drive Vcc_INTF ESD diode to GND and supply rail
8 1.8-V I2C with 3-mA drive Vcc18 ESD diode to GND and supply rail
9 1.8-, 2.5-, 3.3-V LVCMOS with 8-mA drive Vcc_INTF ESD diode to GND and supply rail
11 1.8, 2.5, 3.3 LVCMOS input Vcc_INTF ESD diode to GND and supply rail
12 1.8-, 2.5-, 3.3-V LVCMOS input Vcc_FLSH ESD diode to GND and supply rail
13 1.8-, 2.5-, 3.3-V LVCMOS with 8-mA drive Vcc_FLSH ESD diode to GND and supply rail

Table 2. Internal Pullup and Pulldown Characteristics(1)(2)

INTERNAL PULLUP AND PULLDOWN
RESISTOR CHARACTERISTICS
VCCIO MIN MAX UNIT
Weak pullup resistance 3.3 V 29 63
2.5 V 38 90
1.8 V 56 148
Weak pulldown resistance 3.3 V 30 72
2.5 V 36 101
1.8 V 52 167
The resistance is dependent on the supply voltage level applied to the I/O.
An external 8-kΩ pullup or pulldown (if needed) would work for any voltage condition to correctly pull enough to override any associated internal pullups or pulldowns.