首頁 介面 系統基礎晶片 (SBC)
首頁
介面
系統基礎晶片 (SBC)

TCAN2450-Q1

現行

具降壓穩壓器的車用 CAN FD 可改善訊號 (SIC) 系統基礎晶片 (SBC)

立即訂購
產品規格表

TCAN2450-Q1

現行
產品規格表 立即訂購

產品詳細資料

Type Mid-range Protocols CAN, CAN FD, CAN SIC Number of channels 1 Signaling rate (max) (Mbps) 8 Bus fault voltage (V) -58 to 58 Iout (max) (mA) 1200 Regulated outputs (#) 2 Step-down DC/DC converter 1 Step-down DC/DC Vout (typ) (V) 3.3, 5 LDO 1 LDO Vout (typ) (V) 5 Watchdog type Integrated, Timeout, Window Low-power mode Selective Wake, Sleep, Standby Rating Automotive
Type Mid-range Protocols CAN, CAN FD, CAN SIC Number of channels 1 Signaling rate (max) (Mbps) 8 Bus fault voltage (V) -58 to 58 Iout (max) (mA) 1200 Regulated outputs (#) 2 Step-down DC/DC converter 1 Step-down DC/DC Vout (typ) (V) 3.3, 5 LDO 1 LDO Vout (typ) (V) 5 Watchdog type Integrated, Timeout, Window Low-power mode Selective Wake, Sleep, Standby Rating Automotive
VQFN (RHB) 32 25 mm² (5 mm × 5 mm)
  • AEC-Q100 qualified for automotive applications
  • Meets the requirements of ISO 11898-2:2024 for CAN-FD and CAN-FD Signal Improvement Capability (SIC)
  • Functional Safety Quality-Managed
  • Integrated 3.3V or 5V Buck regulator (VCC1) with 1A output capability
    • Pin-selectable output (3.3V or 5V) based on VSEL pin connection
    • Switching frequency options from 1.8MHz to 2.4MHz to enable a smaller on-board inductor
    • Integrated spread spectrum modulation to improve EMC performance
  • 5V LDO regulator (VCC2) supporting up to 200mA with off-board capability and short-to-battery protection
  • Multiple methods to wake-up from Sleep mode
    • CAN bus wake-up pattern (WUP)
    • Local wake up (LWU) using four WAKE pins
      • Cyclic sensing wake-up using a high-side switch (HSS4)
    • Selective wake (partial networking) capability, TCAN2451-Q1 only
    • Digital wake-up using SW pin
  • WAKE pins configurable as ID pins to identify ECU location in the vehicle
  • Four high-side switches to support multiple loads and allow for cyclic sensing wake
  • Fail-safe output pin (LIMP):
    • Optionally used as a low-side switch
  • ±58V Bus fault protection
  • Advanced CAN bus fault diagnostics
  • Timeout, window, and Q&A watchdog support
  • Access to EEPROM to save device configuration
  • Available in 32-pin leadless package with wettable flank for improved automated optical inspection (AOI) capability
  • AEC-Q100 qualified for automotive applications
  • Meets the requirements of ISO 11898-2:2024 for CAN-FD and CAN-FD Signal Improvement Capability (SIC)
  • Functional Safety Quality-Managed
  • Integrated 3.3V or 5V Buck regulator (VCC1) with 1A output capability
    • Pin-selectable output (3.3V or 5V) based on VSEL pin connection
    • Switching frequency options from 1.8MHz to 2.4MHz to enable a smaller on-board inductor
    • Integrated spread spectrum modulation to improve EMC performance
  • 5V LDO regulator (VCC2) supporting up to 200mA with off-board capability and short-to-battery protection
  • Multiple methods to wake-up from Sleep mode
    • CAN bus wake-up pattern (WUP)
    • Local wake up (LWU) using four WAKE pins
      • Cyclic sensing wake-up using a high-side switch (HSS4)
    • Selective wake (partial networking) capability, TCAN2451-Q1 only
    • Digital wake-up using SW pin
  • WAKE pins configurable as ID pins to identify ECU location in the vehicle
  • Four high-side switches to support multiple loads and allow for cyclic sensing wake
  • Fail-safe output pin (LIMP):
    • Optionally used as a low-side switch
  • ±58V Bus fault protection
  • Advanced CAN bus fault diagnostics
  • Timeout, window, and Q&A watchdog support
  • Access to EEPROM to save device configuration
  • Available in 32-pin leadless package with wettable flank for improved automated optical inspection (AOI) capability

The TCAN245x-Q1 is a family of system basis chips (SBC) that provide a control area network flexible data rate capable (CAN FD) transceiver that meets the physical layer requirements of ISO-11898:2-2024 including the SIC specification. The CAN FD transceiver supports data rates up to 8Mbps. The TCAN245x-Q1 integrates a buck regulator (VCC1) that can output either 3.3V or 5V, and provide up to 1A output current. The buck regulator integrates spread spectrum modulation to improve EMC performance. VCC2 LDO provides 5V output for loads up to 200mA. TCAN2451-Q1 supports Partial Networking by recognizing a selective wakeup frame (WUF)

The TCAN245x-Q1 includes features such as LIMP, four local wake inputs and four high side switches. The high side switch can be on/off, 10-bit PWM or timer controlled. Using the GFO pin, controlling an external CAN FD, LIN transceiver, CAN SBC or LIN SBC is possible. The WAKE pins can be configured for static sensing, cyclic sensing (with HSS4 pin) and pulse based for waking up. These devices provide EEPROM to store specific device configuration information: thus, avoiding extensive reprogramming after power fluctuations.

The TCAN245x-Q1 is a family of system basis chips (SBC) that provide a control area network flexible data rate capable (CAN FD) transceiver that meets the physical layer requirements of ISO-11898:2-2024 including the SIC specification. The CAN FD transceiver supports data rates up to 8Mbps. The TCAN245x-Q1 integrates a buck regulator (VCC1) that can output either 3.3V or 5V, and provide up to 1A output current. The buck regulator integrates spread spectrum modulation to improve EMC performance. VCC2 LDO provides 5V output for loads up to 200mA. TCAN2451-Q1 supports Partial Networking by recognizing a selective wakeup frame (WUF)

The TCAN245x-Q1 includes features such as LIMP, four local wake inputs and four high side switches. The high side switch can be on/off, 10-bit PWM or timer controlled. Using the GFO pin, controlling an external CAN FD, LIN transceiver, CAN SBC or LIN SBC is possible. The WAKE pins can be configured for static sensing, cyclic sensing (with HSS4 pin) and pulse based for waking up. These devices provide EEPROM to store specific device configuration information: thus, avoiding extensive reprogramming after power fluctuations.
filter 尋找其它 系統基礎晶片 (SBC)
下載 觀看有字幕稿的影片 影片
索取更多資訊

提供功能安全文件。立即索取

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TCAN2451-Q1 現行 具有降壓穩壓器與部分網路功能的汽車 CAN FD SIC 系統基礎晶片 (SBC) Similar device with Partial Networking

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TCAN245x-Q1 Automotive Signal Improvement Capable CAN FD System Basis Chip (SBC) with Integrated Buck Regulator and Watchdog datasheet (Rev. C) PDF | HTML 2025/11/17
Application brief 系統基礎晶片 (SBC) 101：CAN 和 LIN SBC 入門指南 PDF | HTML Download English Version PDF | HTML 2025/12/8
Product overview System Basis Chips (SBCs) 101 - Exploration of TI's SBC Portfolio PDF | HTML 2025/11/20
應用說明 Wake Up Methods for CAN SBCs PDF | HTML 2025/11/10
應用說明 Channel Expansion with GFO PDF | HTML 2025/11/4
應用說明 Firmware Guide for TCAN24xx and TCAN28xx Devices PDF | HTML 2025/4/7
證書 TCAN24XXEVM EU Declaration of Conformity (DoC) 2024/3/14

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TCAN24XXEVM — TCAN24xx 評估模組

TCAN24XXEVM 可協助設計人員評估裝置性能，支援快速開發，並使用 CAN 系統基礎晶片 (SBC) 的 TCAN24xx-Q1 系列分析汽車控制器區域網路 (CAN) 系統，其中包括整合式 1A 降壓穩壓器輸出（3.3V 或 5V）、LDO 穩壓器輸出 (5V)、WAKE/ID 功能、HSS、監視器和 LIMP，以及可選的部分網路和訊號改善功能 (SIC)。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
設計工具

SBC-MCU-POWER-DESIGN — TI 匯流排通訊協定裝置和 MCU 的互動式電源相容性矩陣對照表

Interactive power compatibility matrix for TI Bus Protocol Devices and MCUs
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHB) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片