首頁 介面 系統基礎晶片 (SBC)
首頁
介面
系統基礎晶片 (SBC)

TCAN1164-Q1

現行

具 LDO 輸出和看門狗的汽車 CAN FD 系統基礎晶片

立即訂購
產品規格表

TCAN1164-Q1

現行
產品規格表 立即訂購

產品詳細資料

Type General-purpose Protocols CAN, CAN FD Number of channels 1 Signaling rate (max) (Mbps) 8 Bus fault voltage (V) -58 to 58 Iout (max) (mA) 100 Regulated outputs (#) 1 Step-down DC/DC converter 0 LDO 1 LDO Vout (typ) (V) 5 Watchdog type Integrated, Timeout, Window Low-power mode Silent, Sleep, Standby Rating Automotive
Type General-purpose Protocols CAN, CAN FD Number of channels 1 Signaling rate (max) (Mbps) 8 Bus fault voltage (V) -58 to 58 Iout (max) (mA) 100 Regulated outputs (#) 1 Step-down DC/DC converter 0 LDO 1 LDO Vout (typ) (V) 5 Watchdog type Integrated, Timeout, Window Low-power mode Silent, Sleep, Standby Rating Automotive
VSON (DMT) 14 13.5 mm² (4.5 mm × 3 mm)
  • AEC Q100 Qualified for automotive applications
  • Meets the requirements of ISO 11898-2:2016
  • Functional Safety Quality-Managed
  • Wide input operational voltage range
  • Integrated LDO for CAN transceiver supply
    • 5V LDO with 100mA output current capability
  • Classic CAN and CAN FD up to 8Mbps
    • Watchdog timer supporting multiple modes
      • Timeout
      • Window
      • Question and Answer Watchdog (Q&A)
    • Speeds up to 5Mbps
  • Operating modes programmable via SPI
    • Normal mode
    • Silent mode
    • Standby mode
  • Advanced CAN bus fault detection support
  • Defined behavior when unpowered
    • Bus and IO terminals are high impedance (no load to operating bus or application)
  • Protection features:
    • ±58V CAN bus fault tolerant
    • Load dump support on VSUP
    • IEC ESD protection
    • Under-voltage and over-voltage protection
    • Thermal shutdown protection
    • TXD dominant state timeout (TXD DTO)
  • Extra wide junction temperature support
  • Available in the leadless VSON (14) package with wettable flank for improved automated optical inspection (AOI) capability
  • AEC Q100 Qualified for automotive applications
  • Meets the requirements of ISO 11898-2:2016
  • Functional Safety Quality-Managed
  • Wide input operational voltage range
  • Integrated LDO for CAN transceiver supply
    • 5V LDO with 100mA output current capability
  • Classic CAN and CAN FD up to 8Mbps
    • Watchdog timer supporting multiple modes
      • Timeout
      • Window
      • Question and Answer Watchdog (Q&A)
    • Speeds up to 5Mbps
  • Operating modes programmable via SPI
    • Normal mode
    • Silent mode
    • Standby mode
  • Advanced CAN bus fault detection support
  • Defined behavior when unpowered
    • Bus and IO terminals are high impedance (no load to operating bus or application)
  • Protection features:
    • ±58V CAN bus fault tolerant
    • Load dump support on VSUP
    • IEC ESD protection
    • Under-voltage and over-voltage protection
    • Thermal shutdown protection
    • TXD dominant state timeout (TXD DTO)
  • Extra wide junction temperature support
  • Available in the leadless VSON (14) package with wettable flank for improved automated optical inspection (AOI) capability

The TCAN1164-Q1 is a high-speed Controller Area Network (CAN) system basis chip (SBC) that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification. The transceiver supports both classical CAN and CAN FD networks up to 8 megabits per second (Mbps) (TCAN1164-Q1) or 5Mbps (TCAN1164T-Q1).

The TCAN1164-Q1 supports a wide input supply range and integrates a 5V LDO output. The 5V LDO output (VCCOUT) supplies the CAN transceiver voltage internally as well as additional current externally.

The TCAN1164-Q1 includes many protection and diagnostic features including CAN bus line short-circuit detection, thermal shutdown (TSD), driver dominant timeout (TXD DTO), and bus fault protection up to ±58V.

The TCAN1164-Q1 supports watchdog functionality, to make sure the system is healthy by requiring the processor to reset the watchdog timer within a time window.

The TCAN1164-Q1 is a high-speed Controller Area Network (CAN) system basis chip (SBC) that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification. The transceiver supports both classical CAN and CAN FD networks up to 8 megabits per second (Mbps) (TCAN1164-Q1) or 5Mbps (TCAN1164T-Q1).

The TCAN1164-Q1 supports a wide input supply range and integrates a 5V LDO output. The 5V LDO output (VCCOUT) supplies the CAN transceiver voltage internally as well as additional current externally.

The TCAN1164-Q1 includes many protection and diagnostic features including CAN bus line short-circuit detection, thermal shutdown (TSD), driver dominant timeout (TXD DTO), and bus fault protection up to ±58V.

The TCAN1164-Q1 supports watchdog functionality, to make sure the system is healthy by requiring the processor to reset the watchdog timer within a time window.
filter 尋找其它 系統基礎晶片 (SBC)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
TCAN1167-Q1 現行 具 LDO 輸出和看門狗的汽車 CAN FD 系統基礎晶片 Provides WAKE
TCAN11623-Q1 現行 具有整合 5V 電源和 3.3V、70mA LDO 的車用 CAN-FD 收發器 Provides WAKE and 3.3-V LDO
TCAN11625-Q1 現行 具有整合 5V 電源和 5V、100mA LDO 的車用 CAN-FD 收發器 Provides WAKE and 5-V LDO

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TCAN1164-Q1 Automotive CAN FD System Basis Chipwith LDO Output and Watchdog datasheet (Rev. A) PDF | HTML 2026/3/5
Application brief 系統基礎晶片 (SBC) 101：CAN 和 LIN SBC 入門指南 PDF | HTML Download English Version PDF | HTML 2025/12/8
Product overview System Basis Chips (SBCs) 101 - Exploration of TI's SBC Portfolio PDF | HTML 2025/11/20
應用說明 Protecting Automotive CAN Bus Systems From ESD Overvoltage Events PDF | HTML 2022/4/27
功能安全資訊 TCAN1164-Q1 Functional Safety Analysis Report PDF | HTML 2021/3/31
功能安全資訊 TCAN1164-Q1 Functional Safety Report PDF | HTML 2021/3/31
功能安全資訊 TCAN1164-Q1 Functional Safety Manual PDF | HTML 2021/3/31

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TCAN1162EVM — 具有 WAKE 針腳與整合式 LDO 評估模組的 TCAN1162 CAN 收發器

此 EVM 可用於評估 TLIN1162 裝置系列。您可透過測試點、J7 接頭和 DSUB9 連接器輕鬆存取 CAN 匯流排，是許多汽車應用佈線的標準配置。在接頭或測試點中可使用所有引腳。測試點中有具輸出整合式 LDO。提供適合 CAN 匯流排保護的元件封裝及不同終端選項。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

TCAN1167EVM — 適用 CAN FD 系統基礎晶片且具 LDO 輸出和看門狗的 TCAN1167-Q1 評估模組

此 EVM 可用於評估 TCAN1167 裝置系列。您可透過測試點、J13 接頭和 DSUB9 連接器輕鬆存取 CAN 匯流排，是許多汽車應用佈線的標準配置。在接頭或測試點中可使用所有引腳。測試點中有具輸出整合式 LDO。提供適合 CAN 匯流排保護的元件封裝及不同終端選項。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
設計工具

SBC-MCU-POWER-DESIGN — TI 匯流排通訊協定裝置和 MCU 的互動式電源相容性矩陣對照表

Interactive power compatibility matrix for TI Bus Protocol Devices and MCUs
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSON (DMT) 14 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片