LM25180
- Designed for reliable and rugged
applications
- Wide input voltage range of 4.5 V to 42 V with operation down to 3.5 V after start-up
- Robust solution with only one component crossing the isolation barrier
- ±1.5% total output regulation accuracy
- Optional VOUT temperature compensation
- 6-ms internal or programmable soft start
- Input UVLO and thermal shutdown protection
- Hiccup-mode overcurrent fault protection
- –40°C to +150°C junction temperature range
- Integration
reduces solution size and cost
- Integrated 65-V, 0.4-Ω power MOSFET
- No opto-coupler or transformer auxiliary winding required for VOUT regulation
- Internal loop compensation
- High-efficiency PSR flyback
operation
- Quasi-resonant MOSFET turn-off in BCM
- Low input quiescent current
- External bias option for improved efficiency
- Single- and multi-output implementations
- Ultra-low
conducted and radiated EMI signatures
- Soft switching avoids diode reverse recovery
- Optimized for CISPR 32 EMI requirements
- Create a custom regulator design using WEBENCH® Power Designer
The LM25180 is a primary-side regulated (PSR) flyback converter with high efficiency over a wide input voltage range of 4.5 V to 42 V. The isolated output voltage is sampled from the primary-side flyback voltage, eliminating the need for an optocoupler, voltage reference, or third winding from the transformer for output voltage regulation.
The high level of integration results in a simple, reliable and high-density design with only one component crossing the isolation barrier. Boundary conduction mode (BCM) switching enables a compact magnetic solution and better than ±1.5% load and line regulation performance. An integrated 65-V power MOSFET provides output power up to 7 W with enhanced headroom for line transients.
The LM25180 flyback converter is available in a 8-pin, 4-mm × 4-mm, thermally-enhanced WSON package with 0.8-mm pin pitch.
The LM25180 flyback converter simplifies implementation of isolated DC/DC supplies with optional features to optimize performance for the target end equipment. The output voltage is set by one resistor, while an optional resistor improves output voltage accuracy by negating the thermal coefficient of the flyback diode voltage drop. Additional features include an internally-fixed or externally-programmable soft start, optional bias supply connection for higher efficiency, precision enable input with hysteresis for adjustable line UVLO, hiccup-mode overload protection, and thermal shutdown protection with automatic recovery.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
LM5180EVM-DUAL — 寬 VIN PSR 返馳式轉換器雙輸出評估模組
LM5180EVM-S05 — 寬 VIN PSR 返馳式轉換器單輸出評估模組
LM25180DESIGN-CALC — LM25180 Flyback Converter Quickstart Design Tool
歡迎使用 LM25180 快速入門設計工具。此獨立工具有助於電源供應工程師設計基於 LM25180 PSR 返馳轉換器的 DC/DC 返馳穩壓器。因此,使用者可以迅速達到最佳化的設計,以符合應用需求。
TIDA-010006 — 具備整合式交換器 PSR 返馳控制器的隔離式 IGBT 閘極驅動電源參考設計
此參考設計 透過 24-V DC 輸入電源,為絕緣式閘極雙極電晶體 (IGBT) 閘極驅動器提供隔離式正負電壓軌。該產品使用返馳電源拓撲產生四對 15-V 和 –5-V 輸出,適合供電給六個各為 1W 的 IGBT 閘極驅動器。在 LM5180 返馳式轉換器中整合 100-V 額定一次側開關,並免除輔助變壓器繞組,可實現精巧的解決方案。
TIDA-010257 — 10kW Vienna 整流器式三相功率因數校正參考設計
TIDA-01535 — 適用於電源隔離式超小型類比輸出模組的參考設計
此單通道、電源隔離式類比輸出模組參考設計使用高度整合的 DAC8771 數位轉類比轉換器 (DAC) 提供電流和電壓輸出。DAC8771 的高度整合與 LM25180 一次側穩壓返馳式轉換器耦合,實現了電路板尺寸為 52-mm × 40-mm、最大零組件高度為 4mm 的精巧隔離式設計。此外,此設計採用外部電路,可針對電磁干擾 (EMI) 和電磁相容性 (EMC) 提供暫態保護。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WSON (NGU) | 8 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。