TUSB9261-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified with the Following Exceptions:
- Device CDM ESD Classification Level C3
- Ideal for bridging Serial ATA (SATA) Devices, Such
as Hard Disk Drives (HDD), Solid State Drives (SSD),
or Optical Drives (OD) to Universal Serial Bus (USB) - USB Interface
- Integrated Transceiver Supports SS/HS/FS Signaling
- Best in Class Adaptive Equalizer
- Allows for Greater Jitter Tolerance in the Receiver
- USB Class Support
- USB Attached SCSI Protocol (UASP) for HDD and SSD
- USB Mass Storage Class Bulk-Only Transport (BOT)
Including Support for Error Conditions Per the
13 Cases (Defined in the BOT Specification) - USB Bootability Support
- USB Human Interface Device (HID)
- Supports Firmware Update Via USB Using a TI Provided Application
- SATA Interface
- Serial ATA Specification Revision 2.6 Supporting gen1 and
gen2 Data Rates - Supports hot plug
- Supports Mass-Storage Devices Compatible with the ATA/ATAPI-8
Specification
- Serial ATA Specification Revision 2.6 Supporting gen1 and
- Integrated ARM Cortex M3 Core
- Customizable Application Code Loaded From EEPROM Via SPI Interface
- Two Additional SPI Port Chip Selects for Peripheral Connection
- Up to 5 GPIOs for End-User Configuration via HID
- Serial Communications Interface for Debug (UART)
- General Features
- Integrated Spread Spectrum Clock Generation Enables Operation
from a Single Low Cost Crystal or Clock Oscillator- Supports 20, 25, 30 or 40 MHz
- JTAG Interface for IEEE1149.1 and IEEE1149.6 Boundary Scan
- Available in a Fully RoHS Compliant Package (PAP)
- Integrated Spread Spectrum Clock Generation Enables Operation
The TUSB9261-Q1 is an ARM cortex M3 microcontroller based Universal Serial Bus (USB) 3.0 to Serial ATA (SATA) bridge. It provides the necessary hardware and firmware to implement a USB Attached SCSI Protocol (UASP) compliant mass storage device suitable for bridging SATA compatible hard disk drives (HDD) and solid state disk drives (SSD) to a USB 3.0 bus. The firmware also implements the mass storage class bulk-only transport (BOT) for bridging optical drives and other compatible SATA devices to the USB bus. In addition to UASP and BOT support,a USB human interface device (HID) interfaces is supported for control of the general purpose input/ouput (GPIO). The SATA interface supports gen1 (1.5-Gbps) and gen2 (3.0-Gbps) for cable lengths up to 2 meters.
The device is available in a 64-pin HTQFP package and is designed for operation over the industrial temperature range of –40°C to 85°C.
技术文档
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | TUSB9261-Q1 USB 3.0 to SATA Bridge 数据表 (Rev. A) | 2014-1-31 | |||
| * | 勘误表 | TUSB9261 Errata (Rev. B) | 2012-12-20 | |||
| 应用手册 | TUSB9261 Implementation Guide (Rev. E) | 2014-12-9 | ||||
| 用户指南 | TUSB9261 DEMO User's Guide (Rev. A) | 2014-12-9 | ||||
| 用户指南 | TUSB9260 Flash Burner - User Guide (Rev. D) | 2013-10-24 | ||||
| 用户指南 | TUSB926x SpeedBoost Monitor User's Guide | 2010-9-23 |
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
TUSB9261DEMO — TUSB9261 演示套件
The TUSB9261DEMO board is a bridge between a SuperSpeed USB (USB 3.0) bus and a Serial–ATA (SATA) development kit. The TUSB9261DEMO is used to evaluate system compatibility. It provides a TUSB9261 hardware for connection to a SATA device such as a solid state drive, hard disk drive, DVD (...)
TIDA-00148 — 适用于汽车信息娱乐系统的 USB 2.0/3.0 大容量存储桥接器
该 TIDA-00148 参考设计采用 TUSB9261DEMO，可快速评估车载信息娱乐系统配套 SATA 器件的系统连接兼容性。TIDA-00148 中使用的固件能够支持单个 SATA 驱动器，例如固态硬盘、硬盘驱动器、DVD 驱动器和 Blu-Ray 驱动器。TUSB9261-Q1 已针对多款器件完成了全量回归测试，可缩短研发周期，助力产品更快推向市场。
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| HTQFP (PAP) | 64 | Ultra Librarian |