LP38691

正在供货

500mA、10V、低压降稳压器

可提供此产品的更新版本

open-in-new 比较替代产品
功能与比较器件相同但引脚有所不同。
TLV767 正在供货 具有可调节输出和固定输出的 1A、16V 正电压低压降 (LDO) 线性稳压器 Higher input voltage range

产品详情

Rating Catalog Vin (max) (V) 10 Vin (min) (V) 2.7 Iout (max) (A) 0.5 Output options Adjustable Output, Fixed Output Vout (max) (V) 5 Vout (min) (V) 1.8 Fixed output options (V) 1.8, 2.5, 3.3, 5 Noise (µVrms) 80 PSRR at 100 KHz (dB) 50 Iq (typ) (mA) 0.055 Features Foldback Overcurrent protection Thermal resistance θJA (°C/W) 51 Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Accuracy (%) 4 Dropout voltage (Vdo) (typ) (mV) 250 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 10 Vin (min) (V) 2.7 Iout (max) (A) 0.5 Output options Adjustable Output, Fixed Output Vout (max) (V) 5 Vout (min) (V) 1.8 Fixed output options (V) 1.8, 2.5, 3.3, 5 Noise (µVrms) 80 PSRR at 100 KHz (dB) 50 Iq (typ) (mA) 0.055 Features Foldback Overcurrent protection Thermal resistance θJA (°C/W) 51 Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Accuracy (%) 4 Dropout voltage (Vdo) (typ) (mV) 250 Operating temperature range (°C) -40 to 125
TO-252 (NDP) 3 65.2078 mm² (6.58 mm × 9.91 mm) WSON (NGG) 6 9 mm² (3 mm × 3 mm)
  • Wide Input Voltage Range (2.7 V to 10 V)
  • All WSON Options are Available as AEC-Q100 Grade 1
  • 2% Output Accuracy (25°C)
  • Low Dropout Voltage: 250 mV at 500 mA (Typical,
    5 V Out)
  • Precision (Trimmed) Bandgap Reference
  • Ensured Specifications for –40°C to 125°C
  • 1-µA Off-State Quiescent Current
  • Thermal Overload Protection
  • Foldback Current Limiting
  • Ground Pin Current: 55 µA (typical) at full load
  • Enable Pin (LP38693)
  • Wide Input Voltage Range (2.7 V to 10 V)
  • All WSON Options are Available as AEC-Q100 Grade 1
  • 2% Output Accuracy (25°C)
  • Low Dropout Voltage: 250 mV at 500 mA (Typical,
    5 V Out)
  • Precision (Trimmed) Bandgap Reference
  • Ensured Specifications for –40°C to 125°C
  • 1-µA Off-State Quiescent Current
  • Thermal Overload Protection
  • Foldback Current Limiting
  • Ground Pin Current: 55 µA (typical) at full load
  • Enable Pin (LP38693)

The LP3869x low-dropout CMOS linear regulators provide tight output tolerance (2% typical), extremely low dropout voltage (250 mV at 500-mA load current, VOUT = 5 V), and excellent AC performance using ultralow equivalent series resistance (ESR) ceramic output capacitors.

The low thermal resistance of the WSON, SOT-223, and TO-252 packages allow use of the full operating current even in high ambient temperature environments.

The use of a PMOS power transistor means that no DC base-drive current is required to bias it, thus allowing ground pin current to remain below 100 µA regardless of load current, input voltage, or operating temperature.

For all available packages, see the orderable addendum at the end of the data sheet.

The LP3869x low-dropout CMOS linear regulators provide tight output tolerance (2% typical), extremely low dropout voltage (250 mV at 500-mA load current, VOUT = 5 V), and excellent AC performance using ultralow equivalent series resistance (ESR) ceramic output capacitors.

The low thermal resistance of the WSON, SOT-223, and TO-252 packages allow use of the full operating current even in high ambient temperature environments.

The use of a PMOS power transistor means that no DC base-drive current is required to bias it, thus allowing ground pin current to remain below 100 µA regardless of load current, input voltage, or operating temperature.

For all available packages, see the orderable addendum at the end of the data sheet.

下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相同但引脚有所不同。
TPS7A90 正在供货 500mA、低噪声、高 PSRR、高精度、可调节超低压降稳压器 This is a lower noise (4.7uVrms), 500-mA LDO regulator

技术文档

未找到结果。请清除搜索并重试。
查看全部 2
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 LP3869x/-Q1 500-mA Low-Dropout CMOS Linear Regulators Stable With Ceramic Output Capacitors 数据表 (Rev. O) PDF | HTML 2015-12-2
选择指南 Low Dropout Regulators Quick Reference Guide (Rev. P) 2018-3-21

设计与开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

仿真模型

LP38691_3P3 PSpice Transient Model

SNVM582.ZIP (38 KB) - PSpice 模型
支持的产品和硬件
仿真模型

LP38691_3P3 Unencrypted PSpice Transient Model

SNVMA74.ZIP (1 KB) - PSpice 模型
支持的产品和硬件
参考设计

TIDA-00195 — 适用于三相逆变器系统参考设计的隔离式 IGBT 栅极驱动器评估平台

TIDA-00195 参考设计包含 22kW 功率级以及 TI 全新增强型隔离式 IGBT 栅极驱动器 ISO5852S,该设计用于各种应用中的电机控制。此设计允许对 ISO5852S 在三相逆变器中的性能进行评估,该逆变器包含额定电流为 50A-200A 的1200V IGBT 模块。

评估的一些重要功能和性能包括使用 DESAT 检测的短路保护、软关断、不同逆变器 dv/dt 下有源米勒钳位的有效性,以及 IGBT 栅极驱动器在系统级的 ESD/EFT 性能(源自可调速度电气电源驱动系统 (IEC61800-3))。Piccolo launch pad LAUNCHXL-F28027 (...)

支持的产品和硬件
参考设计

TIDA-00909 — 适用于高速驱动应用的 48V/10A 高频 PWM 三相 GaN 逆变器参考设计

低压、高速驱动器和/或低电感无刷电机需要 40kHz 至 100kHz 范围内的更高逆变器开关频率,以最大限度降低电机损耗和转矩纹波。TIDA-00909 参考设计通过采用由三个 80V/10A 半桥 GaN 电源模块 LMG5200 构成的三相逆变器,并结合基于分流器的相电流检测,实现了这一目标。氮化镓 (GaN) 晶体管的开关速度比硅 FET 快得多,并且将 GaN FET 和驱动器集成在同一封装中可以减少寄生电感、优化开关性能并降低损耗,从而减小或省去散热器。TIDA-00909 具有与 TI BoosterPack 兼容的接口,可以连接到 C2000 MCU LaunchPad™ (...)
支持的产品和硬件
参考设计

TIDA-00913 — 具有基于分流电阻的直列电机相电流检测功能的 48V 三相逆变器参考设计

TIDA-00913 参考设计实现了 48V/10A 三相 GaN 逆变器,该逆变器具有基于分流器的精度直列式相位电流检测功能,可对精度驱动器(例如伺服驱动器)进行精准控制。基于分流器的直列式相电流检测的最大挑战之一是 PWM 开关期间的高共模电压瞬态。INA240 双向电流检测放大器使用增强型 PWM 抑制来克服此问题。此参考设计的输出电压为 0 到 3.3V,调节为 ±16.5A,中电压为 1.65V,可在整个温度范围内实现高相电流精度。TIDA-00913 具有与 TI BoosterPack 兼容的接口,可以连接到 C2000 MCU LaunchPad™ 开发套件,以便轻松评估性能。
支持的产品和硬件
参考设计

TIDA-010070 — 适用于低压伺服驱动器、具有保护功能的直流总线输入电源和控制电源参考设计

此参考设计通过 ORing 控制器 LM5050-1 提供反极性和反向电流保护。同时,LM5069 热插拔控制器用于提供过流、过压、欠压保护和浪涌电流限制。该设计还包含适用于栅极驱动器、编码器和 MCU 电路等控制类电子装置的电源轨。
支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
TO-252 (NDP) 3 Ultra Librarian
WSON (NGG) 6 Ultra Librarian

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

所有内容均由 TI 和社区贡献者按“原样”提供,并不构成 TI 规范。请参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持。​​​​​​​​​​​​​​

视频