TPS53681
- Conversion Input Voltage Range: 4.5 V to 17 V
- 8-Bit DAC with Selectable 5 mV or 10 mV Resolution and Output Ranges from 0.25 V to 1.52 V or 0.5 to 2.8125 V for Dual Channels
- Phase Configurations
- Maximum (6-Phase + 2-Phase) or (5-Phase + 3-Phase)
- Minimum (1-Phase + 1-Phase)
- Driverless Configuration for Efficient High-Frequency Switching
- Dynamic Output Voltage Transitions with Programmable Slew Rates via PMBus Interface
- Frequency Selections with Closed-loop Frequency Control: 300 kHz to 1 MHz
- Programmable Internal Loop Compensations
- Configurable with Non-Volatile Memory (NVM) for Low External Component Counts
- Individual Phase Current Calibrations and Reports
- Dynamic Phase Shedding with Programmable Current Threshold for Optimizing Efficiency at Light and Heavy Loads
- Fast Phase-Adding for Undershoot Reduction (USR)
- Fully Compatible with TI NexFET™ Power Stage for High-Density Solutions
- Accurate, Adjustable Voltage Positioning
- Patented AutoBalance™ Phase Balancing
- Selectable, 16-level Per-Phase Current Limit
- PMBus™ System Interface for Telemetry of Voltage, Current, Power, Temperature, and Fault Conditions
- Low Quiescent Current
- 5 mm × 5 mm, 40-Pin, QFN PowerPad™ Package
The TPS53681 is a multiphase step-down controller with dual channels, built-in non-volatile memory (NVM), and PMBus™ interface, and is fully compatible with TI NexFET ™power stage. Advanced control features such as D-CAP+™ architecture with undershoot reduction (USR) provide fast transient response, low output capacitance, and high efficiency. The device also provides novel phase interleaving strategy and dynamic phase shedding for efficiency improvement at different loads. The device supports fast dynamic voltage transitions with adjustable slew rate. In addition, the device supports the PMBus communication interface for reporting the telemetry of voltage, current, power, temperature, and fault conditions to the systems. All programmable parameters can be configured by the PMBus interface and can be stored in NVM as the new default values to minimize the external component count.
The TPS53681 device is offered in a thermally enhanced 40-pin QFN packaged and is rated to operate from –40°C to 125°C.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS53681EVM-002 — PMBus 인터페이스를 지원하는 D-CAP+™ 스텝다운 컨트롤러용 듀얼 채널(6+2/5+3) 평가 모듈
TPS53681EVM 평가 모듈을 사용하면 제품에 포함되어 있는 PMBus 인터페이스의 구성, 제어 및 모니터링 기능을 이용해 저전압, 고전류, 스텝다운 POL(부하 지점) 애플리케이션의 CSD95490 스마트 전력 스테이지를 통해 TPS53681 컨트롤러의 작동 특성을 평가할 수 있습니다.
이 장치는 4.5V~17V의 전압 공급을 사용해 작동하며, PMBus 인터페이스와 TI의 Fusion Digital Power™ 디자이너 소프트웨어를 통한 프로그래밍 및 모니터링을 지원합니다.
FUSION_DIGITAL_POWER_DESIGNER — 디지털 전원 소프트웨어
FUSION_MFR_GUI — Fusion Digital Power Manufacturing Tool
The MFR GUI supports the same devices as Fusion Digital Power Designer software. This tool is typically used in manufacturing (...)
PMP22165 — Xilinx Versal ACAP(적응형 컴퓨팅 가속화 플랫폼)용 전원 레퍼런스 설계
TIDA-050020 — Xilinx® Virtex Ultrascale+™ FPGA용 PMBus™ 전압 레귤레이터 레퍼런스 설계
이 레퍼런스 설계는 입력 및 출력 전압, 전류, 전원 및 온도의 (...)
TIDA-01512 — NXP QorIQ LS2085A/88A 프로세서용 PMBus 전압 레귤레이터 레퍼런스 설계
컨트롤러의 듀얼 출력은 4상 설계의 60ATDC, 1.0V 코어 레일과 30ATDC, 1.2V 보조 레일을 대상으로 합니다. 스마트 전력계와 통합된 PMBus™ 기능을 통해 손쉬운 출력 전압 설정, 주요 설계 매개 변수의 원격 측정 및 보상 조정이 가능합니다.
검증 과정에서 NXP의 레퍼런스 보드에서 출력 커패시턴스가 50% 이상 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RSB) | 40 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.