TPS40192

Name: TPS40192
Brand: TI
SKU: TPS40192
Price: 1.019 USD

활성

전원 양호를 지원하는 4.5V~18V, 20A, 600kHz 동기형 벅 컨트롤러

지금 주문하기

데이터 시트

document-pdfAcrobat TPS4019x 4.5-V to 18-V Input, Voltage-Mode, Synchronous Buck Controller With Power Good datasheet (Rev. H) (영어) PDF | HTML

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

비교 대상 장치와 유사한 기능

TPS546B24A

활성

핀 스트래핑 및 PMBus가 포함된 2.95V~18V 입력, 적층형 20A, 동기형 SWIFT™ 벅 컨버터 Upgraded PMBus with faster switching frequency and extended positive operating temperature range.

TPS40192

활성

데이터 시트

지금 주문하기

제품 상세 정보

Rating

Catalog

Topology

Buck

Iout (max) (A)

20

Vin (max) (V)

18

Vin (min) (V)

4.5

Vout (max) (V)

14.4

Vout (min) (V)

0.591

Control mode

Voltage mode

Features

Enable, Power good, Prebias startup, Synchronous rectification

Duty cycle (max) (%)

85

Iq (typ) (A)

0.0025

Number of phases

1

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Topology

Buck

Iout (max) (A)

20

Vin (max) (V)

18

Vin (min) (V)

4.5

Vout (max) (V)

14.4

Vout (min) (V)

0.591

Control mode

Voltage mode

Features

Enable, Power good, Prebias startup, Synchronous rectification

Duty cycle (max) (%)

85

Iq (typ) (A)

0.0025

Number of phases

1

Operating temperature range (°C)

-40 to 85

VSON (DRC)

10

9 mm² 3 x 3

Input Operating Voltage Range: 4.5 V to 18 V
Up to 20-A Output Currents
Supports Pre-Biased Outputs
0.5%, 591-mV Reference
Switching Frequency
- TPS40192: 600 kHz
- TPS40193: 300 kHz
Three Selectable Thermally Compensated Short-Circuit Protection Levels
Hiccup Restart from Faults
Internal 5-V Regulator
High-Side and Low-Side MOSFET ON-resistance (R_DS(on)) Current Sensing
10-Pin 3 mm × 3 mm SON Package
Internal 4-ms Soft-Start Time
Thermal Shutdown Protection at 145°C

Input Operating Voltage Range: 4.5 V to 18 V
Up to 20-A Output Currents
Supports Pre-Biased Outputs
0.5%, 591-mV Reference
Switching Frequency
- TPS40192: 600 kHz
- TPS40193: 300 kHz
Three Selectable Thermally Compensated Short-Circuit Protection Levels
Hiccup Restart from Faults
Internal 5-V Regulator
High-Side and Low-Side MOSFET ON-resistance (R_DS(on)) Current Sensing
10-Pin 3 mm × 3 mm SON Package
Internal 4-ms Soft-Start Time
Thermal Shutdown Protection at 145°C

TPS40192 and TPS40193 are cost-optimized synchronous buck controllers that operate from 4.5 V to 18 V input. These controllers implement a voltage-mode control architecture with the switching frequency fixed at either 600 kHz (TPS40192) or 300 kHz (TPS40193). The higher switching frequency facilitates the use of smaller inductor and output capacitors, thereby providing a compact power-supply solution. An adaptive anti-cross conduction scheme is used to prevent shoot through current in the power FETs.

Short circuit detection is done by sensing the voltage drop across the low-side MOSFET when it is on and comparing it with a user selected threshold of 100 mV, 200 mV or 280 mV. The threshold is set with a single external resistor connected from COMP to GND. This resistor is sensed at startup and the selected threshold is latched. Pulse-by-pulse limiting (to prevent current runaway) is provided by sensing the voltage across the high-side MOSFET when it is on and terminating the cycle when the voltage drop rises above a fixed threshold of 550 mV. When the controller senses an output short circuit, both MOSFETs are turned off and a timeout period is observed before attempting to restart. This behavior provides limited power dissipation in the event of a sustained fault.

TPS40192 and TPS40193 are cost-optimized synchronous buck controllers that operate from 4.5 V to 18 V input. These controllers implement a voltage-mode control architecture with the switching frequency fixed at either 600 kHz (TPS40192) or 300 kHz (TPS40193). The higher switching frequency facilitates the use of smaller inductor and output capacitors, thereby providing a compact power-supply solution. An adaptive anti-cross conduction scheme is used to prevent shoot through current in the power FETs.

Short circuit detection is done by sensing the voltage drop across the low-side MOSFET when it is on and comparing it with a user selected threshold of 100 mV, 200 mV or 280 mV. The threshold is set with a single external resistor connected from COMP to GND. This resistor is sensed at startup and the selected threshold is latched. Pulse-by-pulse limiting (to prevent current runaway) is provided by sensing the voltage across the high-side MOSFET when it is on and terminating the cycle when the voltage drop rises above a fixed threshold of 550 mV. When the controller senses an output short circuit, both MOSFETs are turned off and a timeout period is observed before attempting to restart. This behavior provides limited power dissipation in the event of a sustained fault.

filter

기타 DC/DC controllers 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

9개 모두 보기

상위 문서	유형	직함	형식 옵션	날짜
*	Data sheet	TPS4019x 4.5-V to 18-V Input, Voltage-Mode, Synchronous Buck Controller With Power Good datasheet (Rev. H)	PDF \| HTML	2019/05/23
	Selection guide	Power Management Guide 2018 (Rev. R)		2018/06/25
	Selection guide	DC/DC Buck Controller Solutions Selection Guide		2018/02/06
	Application note	Not All Jitter Is Created Equal (Rev. A)		2015/07/04
	Application note	Enabling Multiple TPS4019x Devices		2012/03/29
	Application note	'C6472 12Vin Flexible Pwr Design Using DCDC Controllers and LDOs (8x C6472)		2010/03/26
	Application note	Power Reference Design for the 'C6472, 12V DCDC Controllers, and LDOs		2010/03/26
	Application note	TMS320C6472 5V Input Pwr Design, Integrated FET DC/DC Converters and Controllers		2010/03/26
	Application note	5Vin DM643x Power using DC/DC Controllers and LDO		2008/10/09