主页 电源管理 直流/直流开关稳压器 DC/DC converters

TPS61378-Q1

正在供货

产品详情

Rating Automotive Topology Boost Vin (max) (V) 14 Vin (min) (V) 2.3 Vout (max) (V) 18.5 Vout (min) (V) 4 Switch current limit (typ) (A) 4.8 Features Adjustable current limit, Enable, Frequency synchronization, Light-load efficiency, Load Disconnect, Power good, Spread Spectrum, Synchronous rectification, UVLO fixed EMI & noise features Frequency Dithering, Spread Spectrum Control mode Peak current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000035 Duty cycle (max) (%) 90 TI functional safety category Functional Safety-Capable
Rating Automotive Topology Boost Vin (max) (V) 14 Vin (min) (V) 2.3 Vout (max) (V) 18.5 Vout (min) (V) 4 Switch current limit (typ) (A) 4.8 Features Adjustable current limit, Enable, Frequency synchronization, Light-load efficiency, Load Disconnect, Power good, Spread Spectrum, Synchronous rectification, UVLO fixed EMI & noise features Frequency Dithering, Spread Spectrum Control mode Peak current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000035 Duty cycle (max) (%) 90 TI functional safety category Functional Safety-Capable
WQFN (RTE) 16 9 mm² (3 mm × 3 mm)
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • TPS61378-Q1 wettable flank
  • TPS61378L-Q1 immersion Sn
    • Provides shorter production cycle time and longer shelf life
  • Function Safety-Capable
  • Flexible input and output operation range
    • Input voltage range: 2.3V to 14V
    • Programmable output voltage : 4.0V to 18.5V
    • Fixed output options: 5V, 5.25V, and 5.5V
    • Programmable peak current limit: 1A to 4.8A
  • Avoid AM band interference and crosstalk
    • Dynamically programmable switching frequency: 200kHz to 2.2MHz
    • Spread spectrum frequency modulation at FPWM mode
    • Optional clock synchronization
  • Minimize design size for space constraint applications
    • Integrated LS/HS/ISO FET: RDS(ON) 50mΩ/50mΩ/100mΩ
    • Support up to 2.2MHz with small L-C
  • Minimized light load and idle state current consumption
    • 25µA quiescent current into VIN pin
    • 0.5µA shutdown current into VIN pin
    • Selectable auto PFM and forced PWM mode
    • True load disconnect during shutdown or fault conditions
  • Integrated protection features
    • Supports VIN close to VOUT operation
    • Input undervoltage lockout and output overvoltage protection
    • Hiccup output short-circuit protection
    • Power-good indicator
    • Thermal shutdown protection at 165°C
  • Higher than 90% efficiency under 0.8A load from 3.3V to 9V conversion
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • TPS61378-Q1 wettable flank
  • TPS61378L-Q1 immersion Sn
    • Provides shorter production cycle time and longer shelf life
  • Function Safety-Capable
  • Flexible input and output operation range
    • Input voltage range: 2.3V to 14V
    • Programmable output voltage : 4.0V to 18.5V
    • Fixed output options: 5V, 5.25V, and 5.5V
    • Programmable peak current limit: 1A to 4.8A
  • Avoid AM band interference and crosstalk
    • Dynamically programmable switching frequency: 200kHz to 2.2MHz
    • Spread spectrum frequency modulation at FPWM mode
    • Optional clock synchronization
  • Minimize design size for space constraint applications
    • Integrated LS/HS/ISO FET: RDS(ON) 50mΩ/50mΩ/100mΩ
    • Support up to 2.2MHz with small L-C
  • Minimized light load and idle state current consumption
    • 25µA quiescent current into VIN pin
    • 0.5µA shutdown current into VIN pin
    • Selectable auto PFM and forced PWM mode
    • True load disconnect during shutdown or fault conditions
  • Integrated protection features
    • Supports VIN close to VOUT operation
    • Input undervoltage lockout and output overvoltage protection
    • Hiccup output short-circuit protection
    • Power-good indicator
    • Thermal shutdown protection at 165°C
  • Higher than 90% efficiency under 0.8A load from 3.3V to 9V conversion

The TPS61378-Q1 is a fully-integrated synchronous boost converter with an integrated load disconnect function. The input voltage covers 2.3V to 14V while the maximal output voltage covers up to 18.5V. The switching current limit is programmable from 1A to 4.8A. The device consumes 25µA quiescent current from VIN.

The TPS61378-Q1 employs peak current mode control with the switching frequency programmable from 200kHz to 2.2MHz. The device works in fixed frequency PWM operation in medium to heavy loads. There are two optional modes in light load by configuring the MODE pin: auto PFM mode and forced PWM to balance the efficiency and noise immunity in light load. The switching frequency can be synchronized to an external clock. The TPS61378-Q1 uses the spread spectrum of the internal clock to be more EMI friendly at FPWM mode. In addition, there is an internal soft-start time to limit the inrush current.

The TPS61378-Q1 has various fixed output voltage versions to save the external feedback resistor. The device supports the external loop compensation so that the stability and transient response can be optimized at wider VOUT/VIN ranges. The device also integrates robust protection features including output short protection, output overvoltage protection, and thermal shutdown protection. The TPS61378-Q1 is available in a 3mm × 3mm 16-pin QFN package with wettable flank.

The TPS61378-Q1 is a fully-integrated synchronous boost converter with an integrated load disconnect function. The input voltage covers 2.3V to 14V while the maximal output voltage covers up to 18.5V. The switching current limit is programmable from 1A to 4.8A. The device consumes 25µA quiescent current from VIN.

The TPS61378-Q1 employs peak current mode control with the switching frequency programmable from 200kHz to 2.2MHz. The device works in fixed frequency PWM operation in medium to heavy loads. There are two optional modes in light load by configuring the MODE pin: auto PFM mode and forced PWM to balance the efficiency and noise immunity in light load. The switching frequency can be synchronized to an external clock. The TPS61378-Q1 uses the spread spectrum of the internal clock to be more EMI friendly at FPWM mode. In addition, there is an internal soft-start time to limit the inrush current.

The TPS61378-Q1 has various fixed output voltage versions to save the external feedback resistor. The device supports the external loop compensation so that the stability and transient response can be optimized at wider VOUT/VIN ranges. The device also integrates robust protection features including output short protection, output overvoltage protection, and thermal shutdown protection. The TPS61378-Q1 is available in a 3mm × 3mm 16-pin QFN package with wettable flank.

下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相同且具有相同引脚。
TPS61379-Q1 正在供货 25µA 静态电流同步降升压转换器 This product has a fixed 2-A switch current limit.
功能与比较器件相同但引脚有所不同。
TPS55340-Q1 正在供货 符合 AEC-Q100 标准的集成式 5A 40V 宽输入范围升压/SEPIC/反激式直流/直流稳压器 Higher VIN range (up to 38 V) and VOUT range (up to 38 V).
LM5157-Q1 正在供货 采用双随机展频技术的 6A、50V、2.2MHz 宽输入电压升压、反激式和 SEPIC 转换器 LM5157-Q1 with higher VIN range (up to 45 V) and VOUT range (up to 48 V).

技术文档

未找到结果。请清除搜索并重试。
查看全部 4
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 TPS61378-Q1 Automotive, 25µA Quiescent Current Synchronous Boost Converter With Load Disconnect 数据表 (Rev. F) PDF | HTML 2026-11-16
应用简报 适用于可湿性侧面 QFN 和 SON 封装的新型电镀技术 (Rev. A) PDF | HTML 英语版 (Rev.A) 2024-11-20
应用手册 测量和了解升压转换器的输出电压波纹 PDF | HTML 英语版 PDF | HTML 2022-4-22
功能安全信息 TPS61378-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. C) PDF | HTML 2020-10-20

设计与开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估板

TPS61378Q1EVM-060 — TPS61378QRTE 评估模块

借助 TPS61378Q1EVM-060,您可以评估 TPS61378-Q1;后者是一款完全集成的同步升压转换器,具有可选负载断开功能。该器件适用于对汽车应用进行后升压(从 3.3V 或 5V 的稳压电压轨进行升压),可编程电流限制高达 4.8A,最大输出电压为 18.5V。其输入电压范围为 2.3V 至 14V,且具有 25µA 的低静态电流。

TPS61378-Q1 具有汽车应用所需的所有关键特性,包括最大 2.2MHz 的开关频率、扩频选项、外部时钟同步、可选自动 PFM 或 FPWM 模式、间断模式过流保护和 175°C 热关断。

用户指南: PDF | HTML
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
评估板

TPS61379Q1EVM-082 — TPS61379Q1 25uA IQ 同步升压转换器评估模块

TPS61379-Q1 是一款完全集成的同步升压转换器,集成了负载断开功能。该器件可用于对汽车应用进行后升压,电流限制高达 2A,最大输出电压为 18.5V。其输入电压范围为 2.3V 至 14V,具有 25µA 的低静态电流。
用户指南: PDF | HTML
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
仿真模型

TPS61378-Q1 FPWM Version PSpice model

SLVMDF2A (97 KB) - PSpice 模型
支持的产品和硬件
计算工具

SLVRBG8 — TPS61378-Q1 Calculation Tool

支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
WQFN (RTE) 16 Ultra Librarian

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

所有内容均由 TI 和社区贡献者按“原样”提供,并不构成 TI 规范。请参阅使用条款。

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持。​​​​​​​​​​​​​​

视频