主页 电源管理 监控器和复位 IC 复位及看门狗 IC
主页
电源管理
监控器和复位 IC
复位及看门狗 IC

TPS386000-Q1

正在供货

具有可编程延迟和看门狗计时器的汽车级四通道电源电压监控器

立即订购
数据表

TPS386000-Q1

正在供货
数据表 立即订购

产品详情

Rating Automotive Number of supplies monitored 3, 4 Threshold voltage 1 (typ) (V) 0.4, Adjustable Features Manual reset capable, Negative voltage monitoring, Timeout watchdog, Undervoltage and overvoltage monitor, Watchdog timer Reset threshold accuracy (%) 0.5, 1 Iq (typ) (mA) 0.011, 0.012 Output driver type/reset output Active-low, Open-drain Time delay (ms) 20, 30, 300 Watchdog timer WDI (s) 0.6 Operating temperature range (°C) -40 to 125
Rating Automotive Number of supplies monitored 3, 4 Threshold voltage 1 (typ) (V) 0.4, Adjustable Features Manual reset capable, Negative voltage monitoring, Timeout watchdog, Undervoltage and overvoltage monitor, Watchdog timer Reset threshold accuracy (%) 0.5, 1 Iq (typ) (mA) 0.011, 0.012 Output driver type/reset output Active-low, Open-drain Time delay (ms) 20, 30, 300 Watchdog timer WDI (s) 0.6 Operating temperature range (°C) -40 to 125
VQFN (RGP) 20 16 mm² (4 mm × 4 mm)
  • Qualified for Automotive Applications
  • AEC Q100 Test Guidance With the Following
    Results:
    • Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C4B
  • Four Complete SVS Modules on one Silicon
    Platform
  • Programmable Delay Time: 1.4 ms to 10 s
  • Very Low Quiescent Current: 12 µA Typical
  • Threshold Accuracy: 0.25% Typical
  • SVS-1: Manual Reset (MR) Input
  • SVS-1, 2, 3: Adjustable Threshold Down to 0.4 V
  • SVS-4:
    • Adjustable Threshold at Any Positive or
      Negative Voltage with VREF (1.2 V)
    • Window Comparator
  • Watchdog Timer with Dedicated Output
  • Well-Controlled RESETn Output During Power-Up
  • Open-Drain RESETn and WDO
  • Package: 4-mm × 4-mm, 20-pin VQFN
  • Qualified for Automotive Applications
  • AEC Q100 Test Guidance With the Following
    Results:
    • Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C4B
  • Four Complete SVS Modules on one Silicon
    Platform
  • Programmable Delay Time: 1.4 ms to 10 s
  • Very Low Quiescent Current: 12 µA Typical
  • Threshold Accuracy: 0.25% Typical
  • SVS-1: Manual Reset (MR) Input
  • SVS-1, 2, 3: Adjustable Threshold Down to 0.4 V
  • SVS-4:
    • Adjustable Threshold at Any Positive or
      Negative Voltage with VREF (1.2 V)
    • Window Comparator
  • Watchdog Timer with Dedicated Output
  • Well-Controlled RESETn Output During Power-Up
  • Open-Drain RESETn and WDO
  • Package: 4-mm × 4-mm, 20-pin VQFN

The TPS386000-Q1 family of voltage supervisors can monitor four power rails that are greater than 0.4 V and one power rail less than 0.4 V (including negative voltage) with a 0.25% (typical) threshold accuracy. Each of the four supervisory circuits (SVS-n) assert a RESETn or RESETn output signal when the SENSEm input voltage drops below the programmed threshold. With external resistors, the threshold of each SVS-n can be programmed (where n = 1, 2, 3, 4 and m = 1, 2, 3, 4L, 4H).

Each SVS-n has a programmable delay before releasing RESETn or RESETn. The delay time can be set from 1.4 ms to 10 s through the CTn pin connection. Only SVS-1 has an active-low manual reset (MR) input; a logic-low input to MR asserts RESET1 or RESET1.

SVS-4 monitors the threshold window using two comparators. The extra comparator can be configured as a fifth SVS to monitor negative voltage with voltage reference output VREF.

The TPS386000-Q1 device has a very low quiescent current of 12 µA (typical) and is available in a small, 4-mm × 4-mm, VQFN-20 package.

The TPS386000-Q1 family of voltage supervisors can monitor four power rails that are greater than 0.4 V and one power rail less than 0.4 V (including negative voltage) with a 0.25% (typical) threshold accuracy. Each of the four supervisory circuits (SVS-n) assert a RESETn or RESETn output signal when the SENSEm input voltage drops below the programmed threshold. With external resistors, the threshold of each SVS-n can be programmed (where n = 1, 2, 3, 4 and m = 1, 2, 3, 4L, 4H).

Each SVS-n has a programmable delay before releasing RESETn or RESETn. The delay time can be set from 1.4 ms to 10 s through the CTn pin connection. Only SVS-1 has an active-low manual reset (MR) input; a logic-low input to MR asserts RESET1 or RESET1.

SVS-4 monitors the threshold window using two comparators. The extra comparator can be configured as a fifth SVS to monitor negative voltage with voltage reference output VREF.

The TPS386000-Q1 device has a very low quiescent current of 12 µA (typical) and is available in a small, 4-mm × 4-mm, VQFN-20 package.
filter 查找其他 复位及看门狗 IC
下载 观看带字幕的视频 视频

查看 TI.com 库存以寻找类似产品

具有类似规格的产品，按可用的 TI.com 库存分类。

立即查看

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相似。
TPS3704-Q1 正在供货 高精度紧凑型汽车多通道窗口监控器 Offers fixed threshold voltages from 0.4 V to 5.5 V with more granular threshold settings and higher accuracy with a wide range of reset time delays.
TPS389006-Q1 正在供货 汽车类多通道过压和欠压 I²C 可编程电压监控器和监测器 Consider TPS389006-Q1 for designs requiring up to six voltage supervisor channels.

技术文档

未找到结果。请清除搜索并重试。
查看全部 5
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 TPS386000-Q1 Quad Supply Voltage Supervisors With Programmable Delay and Watchdog Timer 数据表 (Rev. B) PDF | HTML 2015-12-11
应用手册 设计电压监控器的电阻分压器输入端时的 IQ与精度权衡因素 (Rev. B) PDF | HTML 英语版 (Rev.B) PDF | HTML 2021-10-25
电子书 电压监测仪和电压检测器：提示、技巧和基础知识 英语版 2019-8-28
选择指南 Automotive Supervisor and Reset IC Selection Guide PDF | HTML 2016-2-22
应用手册 TPS386000-Q1 Pin FMEA 2013-12-5

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

TPS386000EVM-736 — TPS386000 四路电源电压监控器评估模块

TPS386000EVM-736 是一块完全组装且经过测试的电路板，用于评估 20 引脚 QFN 封装的 TPS386000 四路电源电压监控器。TPS386000EVM-736 可以进行定制，更改电阻值可监控高于 0.4V 的电压，包括使用 SENSE4H 和 SENSE4L 输入进行窗口监控和正负监控。TPS386000EVM-736 还可评估芯片的内部看门狗定时器、手动复位和时间延迟功能。
用户指南: PDF
支持的产品和硬件
有库存
限制：
??asset.out-of-stock-ti_zh_CN??
无货
封装 引脚 CAD 符号、封装和 3D 模型
VQFN (RGP) 20 Ultra Librarian
适用于评估类项目的 TI 标准条款与条件。

订购和质量

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

查看全部论坛主题 查看英文版全部论坛主题

所有内容均由 TI 和社区贡献者按“原样”提供，并不构成 TI 规范。请参阅使用条款。

如果您对质量、包装或订购 TI 产品有疑问，请参阅 TI 支持。​​​​​​​​​​​​​​

视频