AEC-Q100, 2.7-V to 120-V, 1.1-Mhz current sense amplifier in small (SC-70) package
产品详细信息
参数
封装|引脚|尺寸
特性
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40 °C to +125 °C, TA
- Functional Safety-Capable
- Wide common-mode voltage:
- Operational voltage: 2.7 V to 120 V
- Survival voltage: −20 V to +122 V
- Excellent CMRR:
- 120-dB DC (minimum)
- 85-dB AC at 50 kHz
- Accuracy
- Gain:
- Gain error: ±0.5% (maximum)
- Gain drift: ±20 ppm/°C (maximum)
- Offset:
- Offset voltage: ±150 µV (maximum)
- Offset drift: ±1 µV/°C (maximum)
- Gain:
- Available gains:
- INA280A1-Q1: 20 V/V
- INA280A2-Q1: 50 V/V
- INA280A3-Q1: 100 V/V
- INA280A4-Q1: 200 V/V
- INA280A5-Q1: 500 V/V
- High bandwidth: 1.1 MHz
- Slew rate: 2 V/µs
- Quiescent current: 370 µA
All trademarks are the property of their respective owners.
描述
The INA280-Q1 is a current sense amplifier that can measure voltage drops across shunt resistors over a wide common-mode range from 2.7 V to 120 V. It is in a highly space-efficient SC-70 package with a PCB footprint of only 2.0 mm × 2.1 mm. The current measurement accuracy is achieved thanks to the combination of an ultra-low offset voltage of ±150 µV (maximum), a small gain error of ±0.5% (maximum), and a high DC CMRR of 140 dB (typical). The INA280-Q1 is not only designed for DC current measurement, but also for high-speed applications (like fast overcurrent protection, for example) with a high bandwidth of 1.1 MHz (at gain of 20 V/V) and an 85-dB AC CMRR (at 50 kHz).
The INA280-Q1 operates from a single 2.7-V to 20-V supply and draws a 370-µA supply current (typical). The INA280-Q1 available with five gain options: 20 V/V, 50 V/V, 100 V/V, 200 V/V, and 500 V/V. The low offset and drift of the INA280-Q1 enables accurate current sensing over the extended operating temperature range of −40 °C to +125 °C.
技术文档
类型 | 标题 | 下载最新的英文版本 | 日期 | |
---|---|---|---|---|
* | 数据表 | INA280-Q1AEC-Q100, 2.7-V to 120-V, 1.1-MHz, High Precision Current Sense Amplifier in Small (SC-70) Package 数据表 | 2020年 11月 20日 | |
应用手册 | 高侧电机电流监测, 用于过流保护 (Rev. B) | 2021年 2月 23日 | ||
技术文章 | How current-sense amplifiers monitor satellite health | 2021年 2月 8日 | ||
应用手册 | H 桥中的电流感应 (Rev. B) | 2021年 2月 5日 | ||
应用手册 | TBD | 2020年 11月 17日 | ||
技术文章 | A key to accurate system thermal management: monitoring both current flow and temperature | 2018年 10月 4日 | ||
技术文章 | System trade-offs for high- and low-side current measurements | 2017年 6月 1日 | ||
应用手册 | 实现过流保护的高侧电机电流监测 (Rev. A) | 下载最新的英文版本 (Rev.B) | 2017年 1月 26日 | |
技术文章 | Why should you care about overcurrent protection in your system? | 2016年 6月 16日 | ||
应用手册 | 所选封装材料的热学和电学性质 | 2008年 10月 16日 |
设计与开发
有关其他条款或所需资源,请点击下面的任何链接来查看详情页面。硬件开发
说明
INA280 评估模块 (EVM) 是一个小型模块,具有五个完全独立且可由设计人员拆分的电路板。五个电路图完全相同的电路板均可用于 INA280 的五个增益型号,此外具有高达 120V 的共模输入和 5A(板载分流)输入能力。
每一电路板均设有针对 VS、GND、OUT 以及 VIN+ 和 VIN- 间端子块的测试点。借助焊盘和插座,可以快速实现输入和输出滤波,并采用 2512 尺寸的板载分流电阻器。
特性
- 利用差分电压或分流电阻器可轻松测试 INA280
- 借助焊盘和插座,可以快速、轻松实现 SMD 滤波
- 借助可拆式面板,设计人员能对所有增益型号进行试验和测试
设计工具和仿真
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI 器件、了解产品系列、打开测试台并对您的设计进行仿真,从而进一步分析选定的器件。您还可对多个 TI 器件进行联合仿真,以更好地展现您的系统。
除了一个完整的预加载模型库之外,您还可以在 PSPICE-FOR-TI 工具中轻松访问 TI 器件的全新技术资料。在您确认找到适合您应用的器件后,可访问 TI store 购买产品。
借助 PSpice for TI,您可使用合适的工具来满足您在整个设计周期(从电路探索到设计开发和验证)的仿真需求。免费获取、轻松入门。立即下载 PSpice 设计和仿真套件,开始您的设计。
入门
- 申请使用 PSPICE-FOR-TI 仿真器
- 下载并安装
- 观看有关仿真入门的培训
特性
- 利用 Cadence PSpice 技术
- 带有一套数字模型的预装库可在最坏情形下进行时序分析
- 动态更新确保您可以使用全新的器件型号
- 针对仿真速度进行了优化,且不会降低精度
- 支持对多个产品进行同步分析
- 基于 OrCAD Capture 框架,提供对业界广泛使用的原理图捕获和仿真环境的访问权限
- 可离线使用
- 在各种工作条件和器件容许范围内验证设计,包括
- 自动测量和后处理
- Monte Carlo 分析
- 最坏情形分析
- 热分析
参考设计
此外,还采用外部保护电路来提供浪涌保护和快速瞬变保护并展示基于 IEC61000-4-4 和 IEC61000-4-5 的不同抗扰度。
设计文件
-
download TIDA-00302 BOM.pdf (52KB)
CAD/CAE 符号
封装 | 引脚 | 下载 |
---|---|---|
SC70 (DCK) | 5 | 了解详情 |
订购与质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/FIT 估算
- 材料成分
- 认证摘要
- 持续可靠性监测