DP83TC817S-Q1
- IEEE 802.1AE MACsec
- MACsec frame expansion: Inbuilt buffering and flow control support to handle 12 byte IPG ethernet frames
- Authentication, encryption at line rate
- Cipher suites: GCM-AES-XPN-128/256, GCM-AES-128/256
- Secure Channel: Total 16 SAK enabling 8 Tx/Rx SC
- Auto rollover support for SAK
- Ingress/Egress classification for Ethertype, VLAN, DMAC: up to 8 parallel rules
- Window replay protection
- IEEE 802.1AS time synchronization
- Highly accurate 1pps signal < +/-5 ns
- Precise time stamping for MACsec encoded PTP packets
- Multiple IOs for event capture and trigger
- IEEE 802.3bw & OA 100BASE-T1 compliant
- TC-10 compliant
- < 20µA sleep current
- Fast wake from sleep by retaining PHY configuration during sleep (optional)
- MAC Interfaces: MII, RMII, RGMII, SGMII
- Pin compatible with TI’s 1000BASE-T1 PHY
- Single board design for 100BASE-T1 and 1000BASE-T1 with required BOM change
- Diagnostic tool kit
- Signal Quality Indication (SQI) & Time Domain Reflectometry (TDR)
- Voltage, Temperature & ESD sensors
- AEC-Q100 qualified for Automotive Applications:
- Temperature grade 1: –40°C to +125 °C
The DP83TC817-Q1 device is an IEEE 802.3bw automotive Ethernet physical layer transceiver. The device provides all physical layer functions needed to transmit and receive data, and xMII interface flexibility. DP83TC817-Q1 is compliant to Open Alliance EMC and interoperable specifications over unshielded single twisted-pair cable. DP83TC817-Q1 supports OA TC-10 low power sleep feature with wake forwarding for reduced system power consumption when communication is not required.
The DP83TC817-Q1 integrates IEEE 802.1AE line rate security with authentication and optional encryption support, to secure communication over the network. The PHY supports up to 16 secure association (SA) channels with automatic SAK rollover and extended packet numbering support. DP83TC817-Q1 offers ingress classification to filter the unwanted packets & supports WAN MACsec for end-to-end security.
DP83TC817-Q1 also integrates 1588v2/802.1AS to enable highly accurate time synchronization and hardware timestamping for ADAS applications. DP83TC817-Q1 also offers precise time stamping and synchronization with encrypted PTP packets.
DP83TC817-Q1 is footprint compatible to TIs 100BASE-T1 PHYs and 1000BASE-T1 PHYs enabling design scalability with a single board for different speeds and features.
Request more information
The full data sheet and additional resources are available. Request now
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | DP83TC817-Q1 Precise and Secure 100BASE-T1 Automotive Ethernet with TC10, IEEE802.1AS and IEEE802.1AE MACsec 数据表 | PDF | HTML | 2024年 4月 18日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
TINA-TI — 基于 SPICE 的模拟仿真程序
TINA-TI 安装需要大约 500MB。直接安装,如果想卸载也很容易。我们相信您肯定会爱不释手。
TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能,但不支持完整版 TINA 所提供的某些其他功能。
如需获取可用 TINA-TI 模型的完整列表,请参阅:SpiceRack - 完整列表
需要 HSpice (...)
封装 | 引脚 | 下载 |
---|---|---|
VQFN (RHA) | 36 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。