ZHCU740 April   2020

 

  1.    说明
  2.    资源
  3.    特性
  4.    应用
  5.    设计图像
  6. 1System Overview
    1. 1.1 Key System Specifications
    2. 1.2 Block Diagram
    3. 1.3 Top Side Pump
    4. 1.4 LED Driver Input Signals
    5. 1.5 LED Driver SDIM/UDIM Settings
    6. 1.6 TPS92641 Board Description
    7. 1.7 Setting the LED Current and Analog Dimming
    8. 1.8 PWM Dimming
  7. 2LED Driver Key Parameters
    1. 2.1 Enable and Disable Delay
    2. 2.2 Rise and Fall Time
    3. 2.3 Ripple
    4. 2.4 Performance Parameters
    5. 2.5 LED Load Capacitor for Rise/Fall Time
    6. 2.6 LED Load Capacitor And Audible Noise
      1. 2.6.1 Layout Considerations
      2. 2.6.2 Electrolytic capacitor considerations
      3. 2.6.3 Standoff Capacitors
    7. 2.7 LED Driver Calculator Tool
  8. 3Layout
  9. 4Related Documentation
    1. 4.1 商标
    2. 4.2 Third-Party Products Disclaimer

2 LED Driver Key Parameters

Figure 8 shows the specific characteristics of a waveform that detail the performance of any LED driver. A LED driver should be both consistent and repeatable, meaning that the light output should reach the same no matter the driver level. Referring back to the figure, we can divide a LED driver waveform to 5 main areas. The five (5) Key Parameters include the following:

  • Enable Delay [A]
  • Rise Time [B]
  • Disable Delay [C]
  • Fall Time [D]
  • Ripple [E]
Figure 8. 5 Key ParametersTIDA-080008 5_key_parameters.gif