SLVUDU8 April   2026 ADS9324

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 Board Settings
    2. 2.2 Setup
  8. 3Software
    1. 3.1 Software Installation
  9. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  10. 5Additional Information
    1. 5.1 Trademarks

2.2 Setup

  • Align the BoosterPack with the LaunchPad headers J1, J3 and J4, J2. Visually align the silkscreen for 3V3, 5V and GND on the BoosterPack with the LaunchPad as shown below.
  • Power-up the LaunchPad by connecting a USB cable.
ADS9324EVM Hardware SetupFigure 2-1 Hardware Setup