SLVUDQ2 March   2026

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Header Information
    3. 2.3 Jumper Information
    4. 2.4 Test Points
    5. 2.5 LED Information
    6. 2.6 Configuring the TPS25730AEVM
      1. 2.6.1 Minimum Voltage Configuration
      2. 2.6.2 Maximum Voltage Configuration
      3. 2.6.3 Sink Current Configuration
      4. 2.6.4 Complete Example
  8. 3Hardware Design Files
    1. 3.1 Schematics
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials (BOM)
  9. 4Additional Information
    1. 4.1 Trademarks

3.2 PCB Layouts

Figure 3-1 through Figure 3-6 illustrate the EVM PCB layouts.

TPS25730AEVM TPS25730AEVM Top Composite View Figure 3-1 TPS25730AEVM Top Composite View
TPS25730AEVM TPS25730AEVM Top Layer Figure 3-2 TPS25730AEVM Top Layer
TPS25730AEVM TPS25730AEVM Ground Plane Figure 3-3 TPS25730AEVM Ground Plane
TPS25730AEVM TPS25730AEVM Power Layer Figure 3-4 TPS25730AEVM Power Layer
TPS25730AEVM TPS25730A Bottom Layer Figure 3-5 TPS25730A Bottom Layer
TPS25730AEVM TPS25730A Bottom Composite View Figure 3-6 TPS25730A Bottom Composite View