SLVUC50 April   2021 LM66200

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Description
    2. 1.2 Features
  3. 2Electrical Performance
  4. 3LM66200EVM Configurations
  5. 4Schematic
  6. 5PCB Layout
  7. 6Test Setup
    1. 6.1 LM66200EVM Test Equipment
    2. 6.2 Setting up the LM66200EVM
  8. 7Test Configuration
  9. 8Bill of Materials (BOM)
  10.   Revision History

6.2 Setting up the LM66200EVM

Make sure the LM66200EVM has the default jumper settings described in Table 5.

Table 6-1 Default Jumper Settings
JumperDescriptionPosition
JP1Sets ON pin reference

Position 2 and 3 for VIN1 tied to ON

Position 1 and 2 for VIN2 tied to ON

JP21 μFInstall JP2 for 1 uF of output capacitance
JP510 ΩInstall JP5 for 10 Ω of load resistance