SLVUBZ0A November   2020  – December 2020 TPS2116

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Description
    2. 1.2 Features
  3. 2Electrical Performance
  4. 3TPS2116EVM Configurations
  5. 4Schematic
  6. 5PCB Layout
  7. 6Test Setup
    1. 6.1 TPS2116EVM Test Equipment
    2. 6.2 Setting up the TPS2116EVM
  8. 7Test Configuration
  9. 8Bill of Materials (BOM)
  10.   Revision History

6.2 Setting up the TPS2116EVM

Make sure the TPS2116EVM has the default jumper settings described in Table 6-1.

Table 6-1 Default Jumper Settings
Jumper Description Position
JP3 Sets voltage divider for PR1 Install
JP6 1-μF Install
JP9 10 Ω Install
JP4 MODE Position 1 and 2
JP5 ST Postition 2 and 3