SLAA701B October   2016  – June 2026 TAS5342A , TAS5342LA , TAS5352 , TAS5630B , TPA3220 , TPA3221 , TPA3251 , TPA3255 , TPA3255-Q1

 

  1.   1
  2.   Trademarks
  3.   Abstract
  4. 1LC Filter Design
    1. 1.1 Class-D Output Configurations
      1. 1.1.1 Bridged-Tied Load (BTL)
      2. 1.1.2 Parallel Bridge-Tied Load (PBTL)
      3. 1.1.3 Single-Ended (SE)
    2. 1.2 Class-D Modulation Schemes
      1. 1.2.1 AD (Traditional) Modulation
      2. 1.2.2 BD Modulation
    3. 1.3 Class-D Output LC Filter
      1. 1.3.1 Output LC Filter Frequency Response Properties
      2. 1.3.2 Class-D BTL Output LC Filter Topologies
      3. 1.3.3 Single-Ended Filter Calculations
      4. 1.3.4 Type-1 Filter Analysis
        1. 1.3.4.1 Type-1 Frequency Response Example
      5. 1.3.5 Type-2 Filter Analysis
        1. 1.3.5.1 Type-2 Frequency Response Example
      6. 1.3.6 Hybrid Filter for AD Modulation
        1. 1.3.6.1 Hybrid Filter Frequency Response Example
      7. 1.3.7 AD Modulation With Type-1 or Type-2 Filters
      8. 1.3.8 LC Filter Quick Selection Guide
    4. 1.4 Inductor Selection for High-Performance Class-D Audio
      1. 1.4.1 Inductor Linearity
      2. 1.4.2 Ripple Current
        1. 1.4.2.1 Calculating Ripple Current for a Single-Supply Class-D Amplifier
      3. 1.4.3 Minimum Inductance
      4. 1.4.4 Core Loss
      5. 1.4.5 DC Resistance (DCR)
      6. 1.4.6 Inductor Study With the TPA3251 Device
        1. 1.4.6.1 Results
        2. 1.4.6.2 Conclusion
    5. 1.5 Capacitor Considerations
      1. 1.5.1 Class-D Output Voltage Overview
        1. 1.5.1.1 Ripple Voltage
        2. 1.5.1.2 37
      2. 1.5.2 Capacitor Ratings and Specifications
        1. 1.5.2.1 Maximum Voltage or Rated DC Voltage
        2. 1.5.2.2 ESR and Dissipation Factor
        3. 1.5.2.3 Maximum Temperature Rise (Rated AC Voltage and AC Current)
        4. 1.5.2.4 Pulse Rise Time (dv/dt) or Peak Current (Ipeak)
      3. 1.5.3 Capacitor Types
        1. 1.5.3.1 Selecting a Capacitor Type
        2. 1.5.3.2 Metalized Film Capacitors
          1. 1.5.3.2.1 AC Voltage or Current Rating
          2. 1.5.3.2.2 Temperature Coefficient
        3. 1.5.3.3 Ceramic Capacitors
          1. 1.5.3.3.1 Size
          2. 1.5.3.3.2 DC Bias Voltage
          3. 1.5.3.3.3 Temperature Coefficient
          4. 1.5.3.3.4 Reliability
    6. 1.6 Related Collateral
  5. 2Reference
  6. 3Reference
  7. 4Revision History

1.5.2.2 ESR and Dissipation Factor

Equivalent series resistance (ESR) and dissipation factor are fairly interchangeable ways to estimate the losses in the capacitor. See Section 1.5.2.3 to estimate the power losses using ESR or dissipation factor.

ESR is represented as a resistance in series with an ideal capacitor. ESR is a simple way to estimate the losses within the capacitor. Figure 1-34 depicts the ESR resistor.

Equivalent Series ResistanceFigure 1-34 Equivalent Series Resistance

Dissipation factor is a slightly different measurement and is used primarily to compare the quality of a capacitor. It is the ratio of the ESR to the capacitance reactance. The dissipation factor includes the losses due to the dielectric material reactance, which when comparing different capacitor technologies makes it easier to understand which capacitor has less losses.

Dissipation FactorFigure 1-35 Dissipation Factor

A lower dissipation factor means less power loss.