SBOK097B April   2025  – June 2025 TMP9R01-SEP

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1 Introduction
  5. 2 Sample Identification
  6. 3 Irradiation Facility and Setup
  7. 4 Die Micro-section
  8. 5 Test Set-Up
  9. 6 SEL Results
    1. 6.1 TMP9R01-SEP SEL Data
  10. 7 SET Results
    1. 7.1 Summary of SET Results
      1. 7.1.1 Local Temperature Reads
        1. 7.1.1.1 Analog Alert Captures
    2. 7.2 Cross Section Events and Event Rate Calculations
  11. 8 Detailed Results Per Run
    1. 8.1 Detailed Run Raw Data
  12. 9 Summary
  13. 10Glossary
  14. 11Revision History

2 Sample Identification

A total of three temperature sensors where verified during SEL testing. A total of one temperature was verified during SET testing. The photos below show the bond wires of a DUT that was tested. All units were decapped before radiation exposure.

Figure 2-1 TMP9R01-SEP DGS Package 10-Pin VSSOP Top View - Pinout
TMP9R01 XRay ImageFigure 2-3 TMP9R01 XRay Image
Functional Block Diagram of the TMP9R01-SEPFigure 2-5 Functional Block Diagram of the TMP9R01-SEP
TMP9R01 Optical ImageFigure 2-2 TMP9R01 Optical Image
TMP9R01 XRay ImageFigure 2-4 TMP9R01 XRay Image