DLPU077A March   2019  – June 2019 DLPC4422

 

  1.   Read This First
    1.     2
    2.     Trademarks
    3.     About This Guide
    4.     Related Documentation from Texas Instruments
  2. 1DLPDLCR660TEVM, DLPDLCR470TEVM and DLPLCRDC4422EVM Overview
    1. 1.1 Welcome
    2. 1.2 What is in the DLPDLCR660TEVM, DLPDLCR470TEVM and DLPLCRDC4422EVM Evaluation Modules (EVMs)?
    3. 1.3 EVM Boards
    4. 1.4 Other Items Needed for Operation
    5. 1.5 DLPLCRDC4422EVM, DLPDLCR470TEVM and DLPDLCR660TEVM EVM Flex Cable
  3. 2Quick Start
    1. 2.1 Downloading the Software
    2. 2.2 Connecting the DLPDLCR660TEVM, or DLPDLCR470TEVM, to the DLPLCRDC4422EVM
    3. 2.3 Powering-up the DLPLCRDC4422EVM and preparing for the DLPLCRDC4422EVM to be programmed
    4. 2.4 Programming the DLPLCRDC4422EVM and Displaying a SPLASH image
    5. 2.5 Troubleshooting
  4. 3Connections
    1. 3.1 DLPLCRDC4422EVM Connections
      1. 3.1.1 Connectors
      2. 3.1.2 TestPoints
    2. 3.2 DLPDLCR660TEVM Connections
      1. 3.2.1 Test Points
      2. 3.2.2 Connectors
    3. 3.3 DLPDLCR470TEVM Connections
      1. 3.3.1 Test Points
      2. 3.3.2 Connectors
  5. 4Power Supply Requirements
    1. 4.1 External Power Supply Requirements
  6. 5Safety
    1. 5.1 Caution Labels
    2. 5.2 If You Need Assistance
  7.   Revision History

2.1 Downloading the Software

Before programming the DLPLCRDC4422EVM, ensure the DLPC4422 GUI and DMD firmware are both downloaded on the PC. The DLPC4422 GUI will allow for operation of the EVM and the DMD firmware is required so the DLPLCRDC4422EVM knows which DMD is being controlled. If the DLPDLCR660TEVM is being used with the DLPLCRDC4422EVM, the DLP660TE firmware is needed. Else if the DLPDLCR470TEVM is used, the DLP470TE firmware is needed.

The DLP660TE firmware and DLPC4422 GUI can be found under the “Tools and Software” tab on the product pages on TI.com. These are the product pages for the DLP660TE, the DLP470TE, and the DLPC4422.