ZHCSQG6A March   2022  – May 2022 LP5891

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Switching Characteristics
    8. 6.8 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Independent and Stackable Mode
        1. 7.3.1.1 Independent Mode
        2. 7.3.1.2 Stackable Mode
      2. 7.3.2 Current Setting
        1. 7.3.2.1 Brightness Control (BC) Function
        2. 7.3.2.2 Color Brightness Control (CC) Function
        3. 7.3.2.3 Choosing BC/CC for a Different Application
      3. 7.3.3 Frequency Multiplier
      4. 7.3.4 Line Transitioning Sequence
      5. 7.3.5 Protections and Diagnostics
        1. 7.3.5.1 Thermal Shutdown Protection
        2. 7.3.5.2 IREF Resistor Short Protection
        3. 7.3.5.3 LED Open Load Detection and Removal
          1. 7.3.5.3.1 LED Open Detection
          2. 7.3.5.3.2 Read LED Open Information
          3. 7.3.5.3.3 LED Open Caterpillar Removal
        4. 7.3.5.4 LED Short and Weak Short Circuitry Detection and Removal
          1. 7.3.5.4.1 LED Short/Weak Short Detection
          2. 7.3.5.4.2 Read LED Short Information
          3. 7.3.5.4.3 LSD Caterpillar Removal
    4. 7.4 Device Functional Modes
    5. 7.5 Continuous Clock Series Interface
      1. 7.5.1 Data Validity
      2. 7.5.2 CCSI Frame Format
      3. 7.5.3 Write Command
        1. 7.5.3.1 Chip Index Write Command
        2. 7.5.3.2 VSYNC Write Command
        3. 7.5.3.3 MPSM Write Command
        4. 7.5.3.4 Standby Clear and Enable Command
        5. 7.5.3.5 Soft_Reset Command
        6. 7.5.3.6 Data Write Command
      4. 7.5.4 Read Command
    6. 7.6 PWM Grayscale Control
      1. 7.6.1 Grayscale Data Storage and Display
        1. 7.6.1.1 Memory Structure Overview
        2. 7.6.1.2 Details of Memory Bank
        3. 7.6.1.3 Write a Frame Data into Memory Bank
      2. 7.6.2 PWM Control for Display
    7. 7.7 Register Maps
      1. 7.7.1  FC0
      2. 7.7.2  FC1
      3. 7.7.3  FC2
      4. 7.7.4  FC3
      5. 7.7.5  FC4
      6. 7.7.6  FC14
      7. 7.7.7  FC15
      8. 7.7.8  FC16
      9. 7.7.9  FC17
      10. 7.7.10 FC18
      11. 7.7.11 FC19
      12. 7.7.12 FC20
      13. 7.7.13 FC21
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
        1. 8.2.1.1 System Structure
        2. 8.2.1.2 SCLK Frequency
        3. 8.2.1.3 Internal GCLK Frequency
        4. 8.2.1.4 Line Switch Time
        5. 8.2.1.5 Blank Time Removal
        6. 8.2.1.6 BC and CC
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Chip Index Command
        2. 8.2.2.2 FC Registers Settings
        3. 8.2.2.3 Grayscale Data Write
        4. 8.2.2.4 VSYNC Command
        5. 8.2.2.5 LED Open/Short Read
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 接收文档更新通知
    3. 11.3 支持资源
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 术语表
  12. 12Mechanical, Packaging, and Orderable Information

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • RRF|76
  • ZXL|96
散热焊盘机械数据 (封装 | 引脚)
7.3.5.4.1 LED Short/Weak Short Detection

The LED short detection (LSD) function detects faults caused by a short circuit in any LED. This function was realized by comparing the OUTn voltage to the LSD threshold voltage. If the OUTn voltage is lower than the threshold voltage, the corresponding output LSD bit is set to 1 to indicate an short LED, otherwise, the output of that LSD bit is 0. LSD data output by the detection circuit are valid only during the OUTn turning on period.

LSD weak short can be detected by adjusting threshold voltage, which level is set by LSDVTH_R/LSDVTH_G/LSDVTH_B (See FC3 for more details).

Figure 7-12 shows the equivalent circuit of LED short detection.

Figure 7-12 LED Short Detection Circuit

The LED short detection function records the position of the short LED, which contains the scan line order and relevant channel number. The scan line order is stored LSD_LINE_WARN register (see FC18, FC19 for more details), and the channel number is latched into the internal 48-bit LSD data register (see FC21 for more details) at the end of each segment. Figure 7-13 shows the bit arrangement of the LSD data register.

GUID-20220224-SS0I-HWLM-5SMB-84QCP71KNMML-low.gif Figure 7-13 Bit Arrangement in the LSD Data Register