ZHCSQG6A March   2022  – May 2022 LP5891

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Switching Characteristics
    8. 6.8 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Independent and Stackable Mode
        1. 7.3.1.1 Independent Mode
        2. 7.3.1.2 Stackable Mode
      2. 7.3.2 Current Setting
        1. 7.3.2.1 Brightness Control (BC) Function
        2. 7.3.2.2 Color Brightness Control (CC) Function
        3. 7.3.2.3 Choosing BC/CC for a Different Application
      3. 7.3.3 Frequency Multiplier
      4. 7.3.4 Line Transitioning Sequence
      5. 7.3.5 Protections and Diagnostics
        1. 7.3.5.1 Thermal Shutdown Protection
        2. 7.3.5.2 IREF Resistor Short Protection
        3. 7.3.5.3 LED Open Load Detection and Removal
          1. 7.3.5.3.1 LED Open Detection
          2. 7.3.5.3.2 Read LED Open Information
          3. 7.3.5.3.3 LED Open Caterpillar Removal
        4. 7.3.5.4 LED Short and Weak Short Circuitry Detection and Removal
          1. 7.3.5.4.1 LED Short/Weak Short Detection
          2. 7.3.5.4.2 Read LED Short Information
          3. 7.3.5.4.3 LSD Caterpillar Removal
    4. 7.4 Device Functional Modes
    5. 7.5 Continuous Clock Series Interface
      1. 7.5.1 Data Validity
      2. 7.5.2 CCSI Frame Format
      3. 7.5.3 Write Command
        1. 7.5.3.1 Chip Index Write Command
        2. 7.5.3.2 VSYNC Write Command
        3. 7.5.3.3 MPSM Write Command
        4. 7.5.3.4 Standby Clear and Enable Command
        5. 7.5.3.5 Soft_Reset Command
        6. 7.5.3.6 Data Write Command
      4. 7.5.4 Read Command
    6. 7.6 PWM Grayscale Control
      1. 7.6.1 Grayscale Data Storage and Display
        1. 7.6.1.1 Memory Structure Overview
        2. 7.6.1.2 Details of Memory Bank
        3. 7.6.1.3 Write a Frame Data into Memory Bank
      2. 7.6.2 PWM Control for Display
    7. 7.7 Register Maps
      1. 7.7.1  FC0
      2. 7.7.2  FC1
      3. 7.7.3  FC2
      4. 7.7.4  FC3
      5. 7.7.5  FC4
      6. 7.7.6  FC14
      7. 7.7.7  FC15
      8. 7.7.8  FC16
      9. 7.7.9  FC17
      10. 7.7.10 FC18
      11. 7.7.11 FC19
      12. 7.7.12 FC20
      13. 7.7.13 FC21
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
        1. 8.2.1.1 System Structure
        2. 8.2.1.2 SCLK Frequency
        3. 8.2.1.3 Internal GCLK Frequency
        4. 8.2.1.4 Line Switch Time
        5. 8.2.1.5 Blank Time Removal
        6. 8.2.1.6 BC and CC
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Chip Index Command
        2. 8.2.2.2 FC Registers Settings
        3. 8.2.2.3 Grayscale Data Write
        4. 8.2.2.4 VSYNC Command
        5. 8.2.2.5 LED Open/Short Read
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 接收文档更新通知
    3. 11.3 支持资源
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 术语表
  12. 12Mechanical, Packaging, and Orderable Information

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • RRF|76
  • ZXL|96
散热焊盘机械数据 (封装 | 引脚)

7.5.3.2 VSYNC Write Command

The VSYNC is used to sync the display of each frame for the devices in a cascaded chain. this command is a write-only command. The devices receive VSYNC command one time from the controller in each frame, and the VSYNC command needs to be active for all devices at the same time.

Because some devices receive the command earlier in the data chain, they need to wait until the last device receives the command, then all the devices are active at that time. To realize such function, each device needs to know its delay time from receiving VSYNC command to enabling VSYNC. The device uses some register bits to restore the device number in a data chain. This number minuses the device identification, and the result is the delay time of the device.

Because the sync function has been done by the device, the controller only must send the VSYNC command to the first device in a data chain.

GUID-BBF8E3AE-A5F1-4DFF-917B-4189C9AB31A0-low.gifFigure 7-19 VSYNC Write Command