ZHCSN33B November   2017  – February 2023 DLP550JE

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  Storage Conditions
    3. 6.3  ESD Ratings
    4. 6.4  Recommended Operating Conditions
    5. 6.5  Thermal Information
    6. 6.6  Electrical Characteristics
    7. 6.7  Timing Requirements
    8. 6.8  Window Characteristics
    9. 6.9  System Mounting Interface Loads
    10. 6.10 Micromirror Array Physical Characteristics
    11. 6.11 Micromirror Array Optical Characteristics
    12. 6.12 Chipset Component Usage Specification
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Feature Description
      1. 7.2.1 Power Interface
      2. 7.2.2 Timing
    3. 7.3 Optical Interface and System Image Quality Considerations
      1. 7.3.1 Numerical Aperture and Stray Light Control
      2. 7.3.2 Pupil Match
      3. 7.3.3 Illumination Overfill
    4. 7.4 Micromirror Array Temperature Calculation
      1. 7.4.1 Micromirror Array Temperature Calculation
    5. 7.5 Micromirror Landed-on/Landed-Off Duty Cycle
      1. 7.5.1 Definition of Micromirror Landed-On/Landed-Off Duty Cycle
      2. 7.5.2 Landed Duty Cycle and Useful Life of the DMD
      3. 7.5.3 Landed Duty Cycle and Operational DMD Temperature
      4. 7.5.4 Estimating the Long-Term Average Landed Duty Cycle of a Product or Application
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
  9. 9 Power Supply Recommendations
    1. 9.1 DMD Power-Up and Power-Down Procedures
  10. 10Device and Documentation Support
    1. 10.1 Device Support
      1. 10.1.1 第三方产品免责声明
      2. 10.1.2 Device Nomenclature
      3. 10.1.3 Device Markings
    2. 10.2 支持资源
      1. 10.2.1 Related Documentation
    3. 10.3 接收文档更新通知
    4. 10.4 Trademarks
    5. 10.5 静电放电警告
    6. 10.6 术语表
  11. 11Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.2.1 Power Interface

The DMD requires 3 DC voltages: DMD_P3P3V, VOFFSET, and MBRST. DMD_P3P3V is created by the DLPA100 power and motor driver and the DLPA200 DMD micromirror driver. Both the DLPA100 and DLPA200 create the main DMD voltages, as well as powering various peripherals (TMP411, I2C, and TI level translators). DMD_P3P3V provides the VCC voltage required by the DMD. VOFFSET (8.5V) and MBRST are made by the DLPA200 and are supplied to the DMD to control the micromirrors.