首頁 電源管理 DC/DC 電源模組 電源模組 (整合式電感器)

TPSM8287B30

預覽

具有 I2C、頻率同步和 MagPack 技術的 6V、30A 可並聯 DC/DC 降壓模組

產品詳細資料

Rating Catalog Topology Buck, Multiphase, Step-Down Converter, Synchronous Buck Iout (max) (A) 30 Vin (max) (V) 6 Vin (min) (V) 2.7 Vout (max) (V) 1.675 Vout (min) (V) 0.4 Features Adjustable soft start, Current Sharing, Differential Remote Sense, Differential Voltage sensing, EMI Tested, Enable, Frequency Dithering, Frequency synchronization, I2C control, I2C interface, I2C support, Light Load Efficiency, MagPack technology, Multiphase, Output discharge, Overcurrent protection, Phase Interleaving, Power good, Remote Sense, Spread-spectrum frequency dithering EMI features Fixed-frequency control, Integrated capacitors, Low parasitic packaging, Mitigated interference & noise technology – architecture 2 (MINT 2), Pinout optimization, Spread Spectrum Operating temperature range (°C) -40 to 125 Switch current limit (typ) (A) 39 Type Converter (Integrated Switch), DC/DC converter, Module Duty cycle (max) (%) 75 Control mode COT, Constant on-time (COT), DCS-Control Switching frequency (min) (kHz) 1200 Switching frequency (max) (kHz) 1800
Rating Catalog Topology Buck, Multiphase, Step-Down Converter, Synchronous Buck Iout (max) (A) 30 Vin (max) (V) 6 Vin (min) (V) 2.7 Vout (max) (V) 1.675 Vout (min) (V) 0.4 Features Adjustable soft start, Current Sharing, Differential Remote Sense, Differential Voltage sensing, EMI Tested, Enable, Frequency Dithering, Frequency synchronization, I2C control, I2C interface, I2C support, Light Load Efficiency, MagPack technology, Multiphase, Output discharge, Overcurrent protection, Phase Interleaving, Power good, Remote Sense, Spread-spectrum frequency dithering EMI features Fixed-frequency control, Integrated capacitors, Low parasitic packaging, Mitigated interference & noise technology – architecture 2 (MINT 2), Pinout optimization, Spread Spectrum Operating temperature range (°C) -40 to 125 Switch current limit (typ) (A) 39 Type Converter (Integrated Switch), DC/DC converter, Module Duty cycle (max) (%) 75 Control mode COT, Constant on-time (COT), DCS-Control Switching frequency (min) (kHz) 1200 Switching frequency (max) (kHz) 1800
QFN-FCMOD (VCH) 37 30 mm² (8 mm × 3.75 mm)
  • ±0.8% output voltage accuracy
  • Differential remote sensing
  • Parallelable for multiphase operation
  • Start-up output voltage and I2C addresses selectable through VSETx pins:
    • 0.4V to 0.775V in 25mV steps
    • 0.8V to 1.55V in 50mV steps
  • Output voltage I2C adjustable in 1.25mV steps
  • Adjustable external compensation for wide output capacitor range and optimized transient response
  • Designed for low EMI requirements
    • MagPack technology shields inductor and IC
    • No bond wire package
    • Optional internal input and output capacitors
    • Simplified layout through parallel input path
    • Optional synchronization to external clock or spread-spectrum operation
  • Optional droop compensation through I2C

  • Power save mode or forced PWM operation
  • Precise enable input threshold
  • Power-good output with window comparator
  • Active output discharge
  • Excellent thermal performance
  • –40°C to 125°C operating temperature range
  • 3.75mm × 8.0mm QFN package with 0.5mm pitch
  • 66mm2 design size
  • ±0.8% output voltage accuracy
  • Differential remote sensing
  • Parallelable for multiphase operation
  • Start-up output voltage and I2C addresses selectable through VSETx pins:
    • 0.4V to 0.775V in 25mV steps
    • 0.8V to 1.55V in 50mV steps
  • Output voltage I2C adjustable in 1.25mV steps
  • Adjustable external compensation for wide output capacitor range and optimized transient response
  • Designed for low EMI requirements
    • MagPack technology shields inductor and IC
    • No bond wire package
    • Optional internal input and output capacitors
    • Simplified layout through parallel input path
    • Optional synchronization to external clock or spread-spectrum operation
  • Optional droop compensation through I2C

  • Power save mode or forced PWM operation
  • Precise enable input threshold
  • Power-good output with window comparator
  • Active output discharge
  • Excellent thermal performance
  • –40°C to 125°C operating temperature range
  • 3.75mm × 8.0mm QFN package with 0.5mm pitch
  • 66mm2 design size

The TPSM8287Bxx is a family of pin-to-pin, step-down, DC/DC power modules with differential remote sensing and I2C interface. The power modules use TI’s MagPack technology to integrate a synchronous step-down converter, an inductor, input and output capacitors to simplify design, reduce external components and save PCB area. The low-profile and compact design is designed for assembly by standard surface mount equipment. The TPSM8287Bxx family implements an enhanced control scheme that supports fast transients. The TPSM8287Bxx can operate in fixed-frequency or power save mode. The remote sensing feature optimizes voltage regulation at the point-of-load and the device achieves ±0.8% DC voltage accuracy over the entire temperature range. The devices can operate in stacked, paralleled mode to deliver higher output currents or to spread the power dissipation across multiple devices. The I2C-compatible interface offers several control, monitoring, and warning features. The start-up voltage is selectable through the VSETx pins to allow a power-up without an active I2C communication.

The TPSM8287Bxx is a family of pin-to-pin, step-down, DC/DC power modules with differential remote sensing and I2C interface. The power modules use TI’s MagPack technology to integrate a synchronous step-down converter, an inductor, input and output capacitors to simplify design, reduce external components and save PCB area. The low-profile and compact design is designed for assembly by standard surface mount equipment. The TPSM8287Bxx family implements an enhanced control scheme that supports fast transients. The TPSM8287Bxx can operate in fixed-frequency or power save mode. The remote sensing feature optimizes voltage regulation at the point-of-load and the device achieves ±0.8% DC voltage accuracy over the entire temperature range. The devices can operate in stacked, paralleled mode to deliver higher output currents or to spread the power dissipation across multiple devices. The I2C-compatible interface offers several control, monitoring, and warning features. The start-up voltage is selectable through the VSETx pins to allow a power-up without an active I2C communication.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 19
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPSM8287Bxx 2.7V to 6V Input, 15A, 20A, 25A, and 30A, Parallelable, Step-Down Power Module With I2 C Interface and Remote Sense in a MagPack Package datasheet (Rev. A) PDF | HTML 2025/12/10
證書 TPSM8287B30-2X-EVM EU Declaration of Conformity (DoC) 2025/9/25
證書 TPSM8287B30LAPEVM EU Declaration of Conformity (DoC) 2025/1/29
Application brief Increasing Further Data Rates Using High-Current Power Converters in Optical Modules PDF | HTML 2024/9/26
類比設計期刊 固定頻率 DCS-Control:具有時脈同步的快速瞬態回應 PDF | HTML Download English Version PDF | HTML 2024/2/13
應用說明 QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023/12/6
應用說明 Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B) PDF | HTML 2023/11/29
應用說明 Adjusting the Output Voltage of a Fixed Output Voltage DC-DC Converter PDF | HTML 2022/12/22
應用說明 Intro to Multi-Function Pins and Their Applications in TI Step-Down Converters (Rev. A) PDF | HTML 2022/11/17
應用說明 Understanding SOA Curves to Operate at High Output Currents and Temperature PDF | HTML 2022/5/5
應用說明 Loop Gain Reconstruction of a Step-Down Converter from Output Impedance PDF | HTML 2022/1/20
應用說明 How to Measure Impedance of a Power Distribution Network of a DC-DC Converter PDF | HTML 2022/1/20
白皮書 Enabling Higher Data Rates for Optical Modules With Small and Efficient Power PDF | HTML 2021/3/22
白皮書 Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 2019/10/14
類比設計期刊 Methods of output-voltage adjustment for DC/DC converters 2019/6/14
類比設計期刊 Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24
應用說明 Basic Calculation of a Buck Converter's Power Stage (Rev. B) PDF | HTML 2015/8/17
類比設計期刊 High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 2013/7/25
應用說明 Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011/9/19

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPSM8287B30-2X-EVM — TPSM8287B30-2x-EVM 評估模組

TPSM8287B30-2X-EVM 評估模組 (EVM) 可加速評估採用 2 個堆疊配置的 TPSM8287B30。這些裝置在接腳對接腳相容的降壓電源模組中支援高達 60A 的負載電流,具有 I2C 介面、遠端感測及頻率同步,採用 3.75mm x 8mm MagPack™ 封裝。這些此 EVM 可從 2.7V 至 6V 的輸入電壓,提供在 0.4V 至 1.675V 範圍內準確度為 0.8% 的 I2C 可調整輸出電壓。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

TPSM8287B30LAPEVM — TPSM8287B30 評估模組

TPSM8287B30 評估模組 (EVM) 可幫助 TPSM8287B30 評估。此裝置在接腳對接腳相容的降壓電源模組中支援高達 30A 的負載電流,具有 I2C 介面、遠端感測及頻率同步,採用 3.75mm x 8mm MagPack™ 封裝。此 EVM 可從 2.7V 至 6V 的輸入電壓,提供在 0.4V 至 1.675V 範圍內準確度為 0.8% 的 I2C 可調整輸出電壓。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發模組 (EVM) 的 GUI

TPSM8287B-EVM-GUI — TPSM8287B EVM GUI

The TPSM8287B EVM GUI interfaces with the TPSM8287Bxx EVMs via the USB2ANY adaptor to read and write to the device's I2C registers.
支援產品和硬體
計算工具

TPSM8287B-CALC — TPSM8287B 元件計算機

TPSM8287B component calculator
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
QFN-FCMOD (VCH) 37 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片