The TMAG5133 is an in-plane Hall-effect switch designed to replace TMR, AMR and Reed switches. The device is optimized to enable small form factors across industrial and consumer applications with ultra-low power consumption, wide supply and temperature ranges.
The TMAG5133 has two unipolar outputs or a single omnipolar which enable the device to react to external magnetic fields. When the applied magnetic flux density through the sensor axis of sensitivity exceeds the operate point threshold (BOP), the device outputs a low voltage on the respective pin. The output stays low until the magnetic flux density decreases to less than the release point threshold (BRP), after which the device outputs a high voltage.
To minimize power consumption, the TMAG5133 is internally duty-cycled. The device has a push-pull output which eliminates the need for an external pullup resistor, and is available in an industry standard X1LGA package.
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TMAG5133 Low-Power, In-plane High Sensitivity Hall-Effect Switch datasheet (Rev. A) | PDF | HTML | 2025年 6月 30日 |
| Application note | Replacing Reed and Magnetoresistive Switches With Cost-Effective, Low-Power Hall-Effect Switches (Rev. B) | PDF | HTML | 2025年 8月 5日 | |
| Application brief | Benefits of Hall-Effect Sensors in Contact Sensors (Rev. B) | PDF | HTML | 2025年 7月 22日 | |
| Application brief | How Hall-Effect Sensors are Used in Electronic Smart Locks (Rev. B) | PDF | HTML | 2025年 7月 22日 | |
| Application note | Position Sensing in Electronic Smart Locks Using Hall-Effect Sensors (Rev. B) | PDF | HTML | 2025年 7月 22日 |
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| X1LGA (ZFC) | 4 | Ultra Librarian |
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。