首頁 感測器 磁性感測器 霍爾效應鎖存器和開關
首頁
感測器
磁性感測器
霍爾效應鎖存器和開關

DRV5033-Q1

現行

汽車 2.7V 至 38V 霍爾效應全極開關

立即訂購
產品規格表

DRV5033-Q1

現行
產品規格表 立即訂購

產品詳細資料

Type Omnipolar switch Supply current (µA) 2700 Bandwidth (kHz) 30 Supply voltage (min) (V) 2.7 Supply voltage (max) (V) 38 Rating Automotive Operating temperature range (°C) -40 to 150 Output Open drain
Type Omnipolar switch Supply current (µA) 2700 Bandwidth (kHz) 30 Supply voltage (min) (V) 2.7 Supply voltage (max) (V) 38 Rating Automotive Operating temperature range (°C) -40 to 150 Output Open drain
SOT-23 (DBZ) 3 6.9204 mm² 2.92 x 2.37 TO-92 (LPG) 3 6.08 mm² 4 x 1.52
  • Digital Omnipolar-Switch Hall Sensor
  • AEC-Q100 Qualified for Automotive Applications
    • Grade 1: TA = –40 to 125°C (Q, See Device Nomenclature)
    • Grade 0: TA = –40 to 150°C (E, See Device Nomenclature)
  • Superior Temperature Stability
    • BOP ±10% Over Temperature
  • Multiple Sensitivity Options (BOP / BRP):
    • ±3.5 / ±2 mT (FA, see Device Nomenclature)
    • ±6.9 / ±3.5 mT (AJ, see Device Nomenclature)
  • Detects North and South Magnetic Field
  • Supports a Wide Voltage Range
    • 2.7 to 38 V
    • No External Regulator Required
  • Open Drain Output (30-mA Sink)
  • Fast 35-µs Power-On Time
  • Small Package and Footprint
    • Surface Mount 3-Pin SOT-23 (DBZ)
      • 2.92 mm × 2.37 mm
    • Through-Hole 3-Pin TO-92 (LPG)
      • 4.00 mm × 3.15 mm
  • Protection Features
    • Reverse Supply Protection (up to –22 V)
    • Supports up to 40-V Load Dump
    • Output Short-Circuit Protection
    • Output Current Limitation
    • OUT Short to Battery Protection
  • Digital Omnipolar-Switch Hall Sensor
  • AEC-Q100 Qualified for Automotive Applications
    • Grade 1: TA = –40 to 125°C (Q, See Device Nomenclature)
    • Grade 0: TA = –40 to 150°C (E, See Device Nomenclature)
  • Superior Temperature Stability
    • BOP ±10% Over Temperature
  • Multiple Sensitivity Options (BOP / BRP):
    • ±3.5 / ±2 mT (FA, see Device Nomenclature)
    • ±6.9 / ±3.5 mT (AJ, see Device Nomenclature)
  • Detects North and South Magnetic Field
  • Supports a Wide Voltage Range
    • 2.7 to 38 V
    • No External Regulator Required
  • Open Drain Output (30-mA Sink)
  • Fast 35-µs Power-On Time
  • Small Package and Footprint
    • Surface Mount 3-Pin SOT-23 (DBZ)
      • 2.92 mm × 2.37 mm
    • Through-Hole 3-Pin TO-92 (LPG)
      • 4.00 mm × 3.15 mm
  • Protection Features
    • Reverse Supply Protection (up to –22 V)
    • Supports up to 40-V Load Dump
    • Output Short-Circuit Protection
    • Output Current Limitation
    • OUT Short to Battery Protection

The DRV5033-Q1 device is a chopper-stabilized Hall Effect Sensor that offers a magnetic sensing solution with superior sensitivity stability over temperature and integrated protection features.

The DRV5033-Q1 responds the same to both polarities of magnetic field direction. When the applied magnetic flux density exceeds the BOP threshold, the DRV5033-Q1 open-drain output goes low. The output stays low until the field decreases to less than BRP, and then the output goes to high impedance. The output current sink capability is 30 mA. A wide operating voltage range from 2.7 to 38 V with reverse polarity protection up to –22 V makes the device suitable for a wide range of automotive applications.

Internal protection functions are provided for reverse supply conditions, load dump, and output short circuit or over current.

The DRV5033-Q1 device is a chopper-stabilized Hall Effect Sensor that offers a magnetic sensing solution with superior sensitivity stability over temperature and integrated protection features.

The DRV5033-Q1 responds the same to both polarities of magnetic field direction. When the applied magnetic flux density exceeds the BOP threshold, the DRV5033-Q1 open-drain output goes low. The output stays low until the field decreases to less than BRP, and then the output goes to high impedance. The output current sink capability is 30 mA. A wide operating voltage range from 2.7 to 38 V with reverse polarity protection up to –22 V makes the device suitable for a wide range of automotive applications.

Internal protection functions are provided for reverse supply conditions, load dump, and output short circuit or over current.

filter 尋找其它 霍爾效應鎖存器和開關
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
DRV5023-Q1 現行 車用 2.7V 至 38V 霍爾效應單極開關 Unipolar sensitivity
DRV5033 現行 高電壓 (高達 38V)、高頻寬 (高達 30 kHz) 單極開關 Industrial version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 10
重要文件 類型 標題 格式選項 日期
* Data sheet DRV5033-Q1 Automotive Digital-Omnipolar-Switch Hall Effect Sensor datasheet (Rev. E) PDF | HTML 2016年 9月 6日
Application brief Introduction to TI Magnetic Sense Simulator Features PDF | HTML 2023年 12月 5日
User guide Texas Instruments' Magnetic Sense Simulator User's Guide PDF | HTML 2023年 12月 4日
Application note Capacitive, Inductive, and Hall Sensing for HMI in Automotive Applications (Rev. A) PDF | HTML 2023年 5月 9日
Application brief Transition Detection Using Hall-Effect Sensors (Rev. A) PDF | HTML 2022年 6月 9日
Application note HMI Rocker Switch With Hall-Effect Switches PDF | HTML 2022年 1月 21日
Application brief Multi-State Position Selection Using Hall-Effect Sensors PDF | HTML 2022年 1月 13日
Application note Understanding and Applying Hall Effect Sensor Data Sheets (Rev. A) PDF | HTML 2021年 12月 7日
Application brief Hall-Effect Sensors in Low-Power Applications (Rev. B) PDF | HTML 2021年 10月 15日
Technical article Measuring wheels in motion PDF | HTML 2015年 4月 24日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

HALL-ADAPTER-EVM — 霍爾感測器匯接轉接器評估模組

使用 HALL-ADAPTER-EVM 可加快開關型、閂鎖型與線性霍爾感測器的原型製作與測試，提供一種快速、簡便且低成本的方式與小型 IC 介接。您可以使用隨附的 Samtec 端子排連接任何支援的霍爾感測器，或直接將其接線至現有電路。支援的封裝完整清單包括 SOT-23、TO-92、X2SON、SOT-23-5/6、0.4mm 節距的 2x2 WCSP 及 MSOP-8。
使用指南: PDF | HTML
TI.com 無法提供
開發板

HALL-HMI-ROCKER-EVM — 使用霍爾效應開關的人機介面 (HMI) 翹板開關評估模組

HALLROCKER-EVM 旨在評估翹板開關人機介面 (HMI) 模組中採用 SOT-23 封裝的霍爾效應開關的性能。本模組根據 HMI 翹板開關中顯示的設計和霍爾效應開關應用說明，顯示三種不同的開關。
使用指南: PDF | HTML
TI.com 無法提供
計算工具

HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool

HALL-PROXIMITY-DESIGN is a software tool that facilitates rapid iterative design for magnet and Hall-effect sensor systems.

支援產品和硬體

支援產品和硬體
下載
模擬工具

TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool

The TI-MAGNETIC-SENSE-SIMULATOR (TIMSS) webtool estimates magnetic flux density and TI magnetic sensor outputs for magnetic position sensing systems. Select from our portfolio of magnetic sensors to thoroughly emulate electro-mechanical performance of your design. The tool supports various magnet (...)
支援產品和硬體

支援產品和硬體
啟動 下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23 (DBZ) 3 Ultra Librarian
TO-92 (LPG) 3 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片