計算工具
HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool
HALL-PROXIMITY-DESIGN is a software tool that facilitates rapid iterative design for magnet and Hall-effect sensor systems.
TMAG5110
- 2D sensing with planar and vertical hall sensors
- Inherent quadrature independent of magnet alignment or magnet pole pitch
- Two functional options available:
- TMAG5110: independent 2D outputs
- TMAG5111: speed and direction outputs
- Ultra-high magnetic sensitivity:
- TMAG511xx2: ±1.4 mT (typical)
- TMAG511xx4: ±3 mT (typical)
- Fast 40-kHz sensing bandwidth
- 2.5-V to 38-V operating VCC range
- Open-drain output (10 mA sink)
- Wide ambient operating temperature range:
- –40 °C to +125 °C
- Protection features
- Reverse supply protection (up to –20 V)
- Device survives up to 40-V
- Output short-circuit protection
- Output current limitation
The TMAG5110 and TMAG5111 are 2-dimensional, dual Hall-effect latches operating from a 2.5 V to 38 V power supply. Designed for high-speed and high-temperature motor applications, these devices are optimized for applications leveraging rotating magnets. Integrating two sensors and two separate signal chains the TMAG511x offers two independent digital outputs giving speed and direction calculation (TMAG5111) or giving directly the digital output of each independent latches (TMAG5110). This high level of integration allow the use of a single TMAG511x device instead of two separate latches.
The device is offered in a standard 3 mT operating point, as well as a high-sensitivity 1.4 mT operating point. The higher magnetic sensitivity provides flexibility in low-cost magnet selection and mechanical component placement. The TMAG511x is also available in three 2-axis combination options (X-Y, Z-X, Z-Y) to allow flexible placement of the sensor relative to the magnet.
The device performs consistently across a wide ambient temperature range of –40 °C to +125 °C.
您可能會感興趣的類似產品
引腳對引腳且具備與所比較裝置相同的功能
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 17 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
DIP-ADAPTER-EVM — DIP 轉接器評估模組
Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.
The (...)
使用指南: PDF
開發板
HALL-ADAPTER-EVM — 霍爾感測器匯接轉接器評估模組
使用 HALL-ADAPTER-EVM 可加快開關型、閂鎖型與線性霍爾感測器的原型製作與測試，提供一種快速、簡便且低成本的方式與小型 IC 介接。您可以使用隨附的 Samtec 端子排連接任何支援的霍爾感測器，或直接將其接線至現有電路。支援的封裝完整清單包括 SOT-23、TO-92、X2SON、SOT-23-5/6、0.4mm 節距的 2x2 WCSP 及 MSOP-8。
開發板
TMAG5110-5111EVM — 適用於高靈敏度、2D、雙通道、霍爾效應鎖存器的 TMAG511x 評估模組
TMAG5110-5111EVM 是一款具有雙霍爾鎖存器的旋轉編碼電路板，具有用於正交 (TMAG5110) 及速度和方向 (TMAG5111) 實作的單獨電路。有兩個不同的磁鐵和兩個磁鐵放置選項，以強調極距獨立性和磁鐵放置獨立性的雙鎖存功能。
模擬工具
TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool
The TI-MAGNETIC-SENSE-SIMULATOR (TIMSS) webtool estimates magnetic flux density and TI magnetic sensor outputs for magnetic position sensing systems. Select from our portfolio of magnetic sensors to thoroughly emulate electro-mechanical performance of your design. The tool supports various magnet (...)
支援產品和硬體
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。