VCA2617

正在供货

2 通道小型封装的可变增益放大器

立即订购

数据表

document-pdfAcrobat Dual, Variable Gain Amplifier 数据表 (英语)

VCA2617

正在供货

数据表

立即订购

产品详情

Number of channels

2

Vs (min) (V)

4.75

Vs (max) (V)

5.25

BW at Acl (MHz)

50

Acl, min spec gain (V/V)

0.32

Gain (max) (dB)

48

Features

Analog Gain Set, Digital Gain Set, Integrated Clamps, Shutdown

Slew rate (typ) (V/µs)

100

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Number of channels

2

Vs (min) (V)

4.75

Vs (max) (V)

5.25

BW at Acl (MHz)

50

Acl, min spec gain (V/V)

0.32

Gain (max) (dB)

48

Features

Analog Gain Set, Digital Gain Set, Integrated Clamps, Shutdown

Slew rate (typ) (V/µs)

100

Rating

Catalog

Operating temperature range (°C)

-40 to 85

VQFN (RHB)

32

25 mm² (5 mm × 5 mm)

INDEPENDENT CHANNEL CONTROLS:
- Gain Range: 48dB
- Clamping Levels
- Post-Gain: 0, +6dB
LOW NOISE: 4.1nV/Hz
LOW POWER: 52mW/Channel
BANDWIDTH: 50MHz
HARMONIC DISTORTION: -53dBc at 5MHz
CROSSTALK: -61dB at 5MHz
5V SINGLE SUPPLY
POWER-DOWN MODE
SMALL QFN-32 PACKAGE (5x5mm)
APPLICATIONS
- MEDICAL AND INDUSTRIAL ULTRASOUND SYSTEMS
  - Suitable for 10-Bit and 12-Bit Systems
- TEST EQUIPMENT
- SONAR

All trademarks are the property of their respective owners.

INDEPENDENT CHANNEL CONTROLS:
- Gain Range: 48dB
- Clamping Levels
- Post-Gain: 0, +6dB
LOW NOISE: 4.1nV/Hz
LOW POWER: 52mW/Channel
BANDWIDTH: 50MHz
HARMONIC DISTORTION: -53dBc at 5MHz
CROSSTALK: -61dB at 5MHz
5V SINGLE SUPPLY
POWER-DOWN MODE
SMALL QFN-32 PACKAGE (5x5mm)
APPLICATIONS
- MEDICAL AND INDUSTRIAL ULTRASOUND SYSTEMS
  - Suitable for 10-Bit and 12-Bit Systems
- TEST EQUIPMENT
- SONAR

All trademarks are the property of their respective owners.

The VCA2617 is a dual-channel, continuously variable, voltage-controlled gain amplifier well-suited for a variety of ultrasound systems as well as applications in proximity detectors and test equipment. The VCA2617 uses a true variable-gain amplifier architecture, achieving very good noise performance at low gains, while not sacrificing high gain distortion performance.

Following a linear-in-dB response, the VCA2617 gain can be varied over a 48dB range with a 0.2V to 2.3V control voltage. Two separate high-impedance control inputs allow for a channel independent variation of the gains. Each channel of the VCA2617 can be configured to provide a gain range of -10dB to 38dB, or -16dB to 32dB, depending on the gain select pin (HG)\. This post-gain feature allows the user to optimize the output swing of VCA2617 for a variety of high-speed analog-to-digital converters (ADC). As a means to improve system overload recovery time, the VCA2617 also provides an internal clamping circuitry where an externally applied voltage sets the desired output clamping level.

The VCA2617 operates on a single +5V supply while consuming only 52mW per channel. It is available in a small QFN-32 package (5x5mm).

The VCA2617 is a dual-channel, continuously variable, voltage-controlled gain amplifier well-suited for a variety of ultrasound systems as well as applications in proximity detectors and test equipment. The VCA2617 uses a true variable-gain amplifier architecture, achieving very good noise performance at low gains, while not sacrificing high gain distortion performance.

Following a linear-in-dB response, the VCA2617 gain can be varied over a 48dB range with a 0.2V to 2.3V control voltage. Two separate high-impedance control inputs allow for a channel independent variation of the gains. Each channel of the VCA2617 can be configured to provide a gain range of -10dB to 38dB, or -16dB to 32dB, depending on the gain select pin (HG)\. This post-gain feature allows the user to optimize the output swing of VCA2617 for a variety of high-speed analog-to-digital converters (ADC). As a means to improve system overload recovery time, the VCA2617 also provides an internal clamping circuitry where an externally applied voltage sets the desired output clamping level.

The VCA2617 operates on a single +5V supply while consuming only 52mW per channel. It is available in a small QFN-32 package (5x5mm).

filter

查找其他可编程和可变增益放大器（PGA 和 VGA）

下载观看带字幕的视频视频

技术文档

未找到结果。请清除搜索并重试。

查看全部 1

顶层文档	类型	标题	格式选项	下载最新的英语版本		日期
*	数据表	Dual, Variable Gain Amplifier 数据表				2005-8-9

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

VCA2617EVM — VCA2617 评估模块

The VCA2617 is a dual-channel, continuously variable, voltage-controlled amplifier. The VCA2617EVM evaluation module is designed to allow for a quick setup and ease of use in evaluating the performance. Various modes of operation can be configured, for example using the transfomer coupled, or the (...)

用户指南: PDF

支持的产品和硬件

有库存

限制：

登录以订购

lock

登录以查看库存

??asset.out-of-stock-ti_zh_CN??

无货

仿真模型