主页 电源管理 直流/直流开关稳压器 DC/DC converters
主页
电源管理
直流/直流开关稳压器
DC/DC converters
新

TPS63820

正在供货
立即订购
数据表

TPS63820

正在供货
数据表 立即订购

产品详情

Rating Catalog Topology Buck-Boost Vin (max) (V) 5.5 Vin (min) (V) 1.8 Vout (max) (V) 5.5 Vout (min) (V) 1.2 Switch current limit (typ) (A) 7.2 Features Dynamic voltage scaling, Enable, I2C interface, Light-load efficiency, Load Disconnect, Low Quiescent Current, Output discharge, Overtemperature protection, Overvoltage protection, Power good, Prebias startup, Synchronous rectification, True Shutdown, UVLO fixed Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0000023 Duty cycle (max) (%) 100
Rating Catalog Topology Buck-Boost Vin (max) (V) 5.5 Vin (min) (V) 1.8 Vout (max) (V) 5.5 Vout (min) (V) 1.2 Switch current limit (typ) (A) 7.2 Features Dynamic voltage scaling, Enable, I2C interface, Light-load efficiency, Load Disconnect, Low Quiescent Current, Output discharge, Overtemperature protection, Overvoltage protection, Power good, Prebias startup, Synchronous rectification, True Shutdown, UVLO fixed Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0000023 Duty cycle (max) (%) 100
DSBGA (YBG) 15 2.550453 mm² (2.029 mm × 1.257 mm)
  • Input voltage range: 1.8V to 5.5V
    • 2.0V minimum input voltage for start-up
  • VOUT range: I2C-configurable 1.2V to 5.5V with 25mV step
  • Output current
    • Up to 3.5A for VIN ≥ 2.5V, VOUT = 3.3V
    • Up to 4A for VIN ≥ 3V, VOUT = 3.3V
  • High efficiency over the entire load range
    • Low 2.3µA operating quiescent current
    • Automatic power save mode, ultra-sonic mode, and forced PWM mode
    • 91.94% efficiency at VIN = 3.6V, VOUT = 3.3V, IOUT = 100µA (in buck-boost mode)
    • 95.33% efficiency at VIN = 3.6V, VOUT = 3.3V, IOUT = 2A (in buck-boost mode)
  • Supports 1.2V logic I/O
  • Three I2C target addresses available by ADDR pin connection
  • Programmable soft-start time, current limit, and buck-boost window
  • Output discharge function
  • Safety and robust protection features
    • Overtemperature protection
    • Input and output overvoltage protection
    • True load disconnect during shutdown
    • Forward and backward current limit
    • Hiccup protection
  • Three device options:
    • TPS63820: preprogrammed 3.3V VOUT
    • TPS638201: program VOUT prior to start-up
    • TPS638202: preprogrammed 3.3V VOUT, optimized for faster transient response
  • 15-ball WCSP package (2.0mm × 1.2mm)
  • Input voltage range: 1.8V to 5.5V
    • 2.0V minimum input voltage for start-up
  • VOUT range: I2C-configurable 1.2V to 5.5V with 25mV step
  • Output current
    • Up to 3.5A for VIN ≥ 2.5V, VOUT = 3.3V
    • Up to 4A for VIN ≥ 3V, VOUT = 3.3V
  • High efficiency over the entire load range
    • Low 2.3µA operating quiescent current
    • Automatic power save mode, ultra-sonic mode, and forced PWM mode
    • 91.94% efficiency at VIN = 3.6V, VOUT = 3.3V, IOUT = 100µA (in buck-boost mode)
    • 95.33% efficiency at VIN = 3.6V, VOUT = 3.3V, IOUT = 2A (in buck-boost mode)
  • Supports 1.2V logic I/O
  • Three I2C target addresses available by ADDR pin connection
  • Programmable soft-start time, current limit, and buck-boost window
  • Output discharge function
  • Safety and robust protection features
    • Overtemperature protection
    • Input and output overvoltage protection
    • True load disconnect during shutdown
    • Forward and backward current limit
    • Hiccup protection
  • Three device options:
    • TPS63820: preprogrammed 3.3V VOUT
    • TPS638201: program VOUT prior to start-up
    • TPS638202: preprogrammed 3.3V VOUT, optimized for faster transient response
  • 15-ball WCSP package (2.0mm × 1.2mm)

The TPS63820, TPS638201 and TPS638202 are low quiescent current, high output current buck-boost converters fully programmable through I2C. The 2.3µA quiescent current and four low Rdson MOSFETs enable high efficiency from a light to a heavy load range.

Depending on the input voltage, the devices automatically operate in boost, buck, or in buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes occur at defined thresholds and avoid unwanted toggling within the modes which reduces output voltage ripple.

The devices have a fast dynamic response, which enables the regulation of output voltage tightly, even in the event of heavy load transients.

The devices offer a small design size in WCSP. The design size is < 20mm2 with only four external components.

The TPS63820, TPS638201 and TPS638202 are low quiescent current, high output current buck-boost converters fully programmable through I2C. The 2.3µA quiescent current and four low Rdson MOSFETs enable high efficiency from a light to a heavy load range.

Depending on the input voltage, the devices automatically operate in boost, buck, or in buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes occur at defined thresholds and avoid unwanted toggling within the modes which reduces output voltage ripple.

The devices have a fast dynamic response, which enables the regulation of output voltage tightly, even in the event of heavy load transients.

The devices offer a small design size in WCSP. The design size is < 20mm2 with only four external components.
filter 查找其他 DC/DC converters
下载 观看带字幕的视频 视频

技术文档

未找到结果。请清除搜索并重试。
查看全部 1
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 TPS63820 Low Quiescent Current, 4A Buck-Boost Converters With I2C Interface 数据表 (Rev. B) PDF | HTML 2026-11-11

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

TPS63820EVM — TPS63820 评估模块

TPS63820EVM 是高效、单电感器 4A 降压/升压转换器，具有内部补偿功能和低静态电流，采用 15 引脚、2.0mm × 1.2mm × 0.5mm DSBGA 封装。可通过 I²C 以 25mV 的增量在 1.2V 至 5.5V 的范围内对输出电压进行编程。
用户指南: PDF | HTML
支持的产品和硬件
有库存
限制：
??asset.out-of-stock-ti_zh_CN??
无货
封装 引脚 CAD 符号、封装和 3D 模型
DSBGA (YBG) 15 Ultra Librarian
适用于评估类项目的 TI 标准条款与条件。

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

查看全部论坛主题 查看英文版全部论坛主题

所有内容均由 TI 和社区贡献者按“原样”提供，并不构成 TI 规范。请参阅使用条款。

如果您对质量、包装或订购 TI 产品有疑问，请参阅 TI 支持。​​​​​​​​​​​​​​

视频