TPS62260
- High Efficiency Step-Down Converter
- Output Current up to 600 mA
- VIN Range from 2 V to 6 V for Li-ion Batteries with
Extended Voltage Range - 2.25-MHz Fixed Frequency Operation
- Power Save Mode at Light Load Currents
- Output Voltage Accuracy in PWM Mode ±1.5%
- Typical 15-µA Quiescent Current
- 100% Duty Cycle for Lowest Dropout
- Voltage Positioning at Light Loads
- Available in a SOT (5) and 2-mm × 2-mm × 0.8-
mm WSON (6) Package - Allows <1-mm Solution Height
- APPLICATIONS
- Mobile Phones, Smart Phones
- Low Power DSP Supply
- Portable Media Players
- Point-of-Load (POL) Applications
All other trademarks are the property of their respective owners
The TPS6226x device is a highly efficient synchronous step-down DC/DC converter. The TPS6226x provides up to 600-mA output current from a single Li-Ion cell, and is ideal for battery-powered applications such as mobile phones and other portable equipment.
With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline batteries, 3.3-V and 5-V input voltage rails.
The TPS6226x operates at 2.25-MHz fixed-switching frequency, and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.
The power save mode is optimized for low-output voltage ripple. For low noise applications, the device can be forced into fixed frequency pulse-width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6226x allows the use of small inductors and capacitors to achieve a small solution size.
The TPS6226x operates over a free air temperature range of 40°C to 85°C. It is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.
技术文档
设计与开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
TPS62260EVM-229 — TPS62260 6V 输入、1.2V 输出、0.6A 评估模块
The TPS62260EVM-229 facilitates evaluation of the TPS62260 2.25 MHz, 600 mA step-down converter in 2x2SON/TSOT-23 package.
TPS62260LED-338 — TPS62260LED-338 评估模块
The TPS62260LED-338 evaluation module controls the color and brightness of a lamp or runs an automatic color light animation program. The color is generated by three LEDs (red, green and blue). An MSP430 ultra-low power microcontroller controls the brightness of each LED with constant current (...)
SLVC161 — TPS62260 Software Zip File
SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC
TIDA-01571 — 采用 DLP® 技术且具有更高亮度的便携式低功耗高清显示器参考设计
TIDA-080002 — 超便携、低功耗 DLP® Pico™ qHD 显示器参考设计
TIDC-DEVPACK-LED-AUDIO — DEVPACK-LED-AUDIO
LED Audio DevPack 实现了工业物联网照明应用。将其插入 SensorTag DevPack 扩展插头,然后使用 Osram 的四个高功率 LED 扩展您的设计。利用 LED Audio DevPack,可以轻松创建由手机通过 Bluetooth® Smart SensorTag 控制的 LED 照明应用,或使用 ZigBee 连接到 ZigBee® 照明系统。
TIDM-MSP-DALI — 数字可寻址照明接口 (DALI)
数字可寻址照明接口 (DALI) 标准定义了用于照明控制应用中的通用通信协议和物理接口标准。该设计采用现有的 TPS62260LED-338 EVM 和电平转换电路板以实施 DALI LED 器件类型控制机构。在 TPS62260LED-338 EVM 上找到的微控制器为 MSP430F2131。MSP430F2131 负责执行与 CPU 间的通信,而计时器资源主要用于控制淡出率和 LED 亮度。DALI 在 IEC 60929 中有具体的定义,并已在 IEC 62386 中进行了更新。包含 LED 器件类型是进行此更新的主要原因之一。
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| SOT-23-THN (DDC) | 5 | Ultra Librarian |
| WSON (DRV) | 6 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。