主页 电源管理 以太网供电 (PoE) IC 电源设备

TPS23881

正在供货

具有 200mΩ RSENSE 的 4 线对、4 类、8 通道 PoE PSE 

产品详情

PoE standards supported 802.3at Type 1 (802.3af), 802.3at Type 2, 802.3bt Type 3, 802.3bt Type 4 MPS method DC Disconnect Features Auto Mode, Current Limit with Foldback, Fast shutdown, Multi Level Port Priority, Over Current Reporting, Over Temp Reporting, Port remapping, Programmable PCUT, Programmable Port Power Limiting, SRAM Programmable Number of PSE ports 8 Pair control 2-Pair Alt A, 4-Pair Vin (max) (V) 57 Vin (min) (V) 44 FET External ILIM Programmable Operating temperature range (°C) -40 to 125 Rating Catalog
PoE standards supported 802.3at Type 1 (802.3af), 802.3at Type 2, 802.3bt Type 3, 802.3bt Type 4 MPS method DC Disconnect Features Auto Mode, Current Limit with Foldback, Fast shutdown, Multi Level Port Priority, Over Current Reporting, Over Temp Reporting, Port remapping, Programmable PCUT, Programmable Port Power Limiting, SRAM Programmable Number of PSE ports 8 Pair control 2-Pair Alt A, 4-Pair Vin (max) (V) 57 Vin (min) (V) 44 FET External ILIM Programmable Operating temperature range (°C) -40 to 125 Rating Catalog
VQFN (RTQ) 56 64 mm² (8 mm × 8 mm)
  • IEEE 802.3bt PSE solution for PoE 2 Type 3 or Type 4 Power over Ethernet applications
  • Eight independent PSE channels
  • Compatible with TI’s FirmPSE system firmware
  • SRAM Programmable memory
  • Programmable power limiting accuracy ±2.5%
  • 200-mΩ current sense resistor
  • Legacy PD capacitance measurement
  • Selectable 2-pair or 4-pair port power allocations
    • 15.4 W, 30 W, 45 W, 60 W, 75 W or 90 W
  • Single and dual signature PD compatibility
  • Dedicated 14-bit integrating current ADC per port
    • Noise immune MPS for DC disconnect
    • 2% current sensing accuracy
  • 1- or 3-bit fast port shutdown input
  • Auto-class discovery and power measurement
  • Inrush and operational foldback protection
  • Flexible processor controlled operating modes
    • Auto, semi auto and manual / diagnostic
  • Per port voltage monitoring and telemetry
  • –40°C to +125°C temperature operation
  • Ultra Low Alpha (ULA) packaging (TPS23881A)
  • IEEE 802.3bt PSE solution for PoE 2 Type 3 or Type 4 Power over Ethernet applications
  • Eight independent PSE channels
  • Compatible with TI’s FirmPSE system firmware
  • SRAM Programmable memory
  • Programmable power limiting accuracy ±2.5%
  • 200-mΩ current sense resistor
  • Legacy PD capacitance measurement
  • Selectable 2-pair or 4-pair port power allocations
    • 15.4 W, 30 W, 45 W, 60 W, 75 W or 90 W
  • Single and dual signature PD compatibility
  • Dedicated 14-bit integrating current ADC per port
    • Noise immune MPS for DC disconnect
    • 2% current sensing accuracy
  • 1- or 3-bit fast port shutdown input
  • Auto-class discovery and power measurement
  • Inrush and operational foldback protection
  • Flexible processor controlled operating modes
    • Auto, semi auto and manual / diagnostic
  • Per port voltage monitoring and telemetry
  • –40°C to +125°C temperature operation
  • Ultra Low Alpha (ULA) packaging (TPS23881A)

The TPS23881 is an 8-channel power sourcing equipment (PSE) controller engineered to insert power onto Ethernet cables in accordance with the IEEE 802.3bt standard. The eight individual power channels can be configured in any combination of 2-Pair (1-channel) or 4-Pair (2-channels) PoE Ports. The PSE controller can detect powered devices (PDs) that have a valid signature, complete mutual identification, and apply power.

The TPS23881 improves on the TPS23880 with reduced current sense resistors, more accurate programmable power limiting, capacitance measurement and the ability to operate from ROM (see Device Comparison Table). The TPS23881 is also compatible with TI’s FirmPSE system firmware, which provides a fully configurable solution for controlling multiple TPS23881 devices in systems offering up to 48-ports of 4-pair PoE power.

Programmable SRAM enables in-field firmware upgradability over I 2C to ensure IEEE compliance and interoperability with the latest PoE enabled devices. Dedicated per port ADCs provide continuous port current monitoring and the ability to perform parallel classification measurements for faster port turn on times. A ±2.5% accurate programmable port power limit provides the ability to expand the maximum power sourced from 90 W to upwards of 125 W. The 200-mΩ current sense resistor and external FET architecture allow designs to balance size, efficiency, thermal and solution cost requirements. 

The TPS23881 is an 8-channel power sourcing equipment (PSE) controller engineered to insert power onto Ethernet cables in accordance with the IEEE 802.3bt standard. The eight individual power channels can be configured in any combination of 2-Pair (1-channel) or 4-Pair (2-channels) PoE Ports. The PSE controller can detect powered devices (PDs) that have a valid signature, complete mutual identification, and apply power.

The TPS23881 improves on the TPS23880 with reduced current sense resistors, more accurate programmable power limiting, capacitance measurement and the ability to operate from ROM (see Device Comparison Table). The TPS23881 is also compatible with TI’s FirmPSE system firmware, which provides a fully configurable solution for controlling multiple TPS23881 devices in systems offering up to 48-ports of 4-pair PoE power.

Programmable SRAM enables in-field firmware upgradability over I 2C to ensure IEEE compliance and interoperability with the latest PoE enabled devices. Dedicated per port ADCs provide continuous port current monitoring and the ability to perform parallel classification measurements for faster port turn on times. A ±2.5% accurate programmable port power limit provides the ability to expand the maximum power sourced from 90 W to upwards of 125 W. The 200-mΩ current sense resistor and external FET architecture allow designs to balance size, efficiency, thermal and solution cost requirements. 

下载 观看带字幕的视频 视频
申请了解更多信息

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相同且具有相同引脚。
TPS23882B 正在供货 具有自主模式、SRAM 和 200mΩ RSENSE 的 3 类、2 线对、8 通道 PoE PSE 控制器 Pin-to-pin for <30 W IEEE 802.3bt Type 3

技术文档

未找到结果。请清除搜索并重试。
查看全部 8
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 TPS23881 Type-4 4-Pair 8-Channel PoE 2 PSE Controller with SRAM and 200 mΩ RSENSE 数据表 (Rev. E) PDF | HTML 2023-5-16
设计指南 适用于多端口应用的 24 端口(4 线对)电源设备参考设计 PDF | HTML PDF | HTML 2026-4-9
应用简报 如何通过 I2C 加载 TPS2388x SRAM 和奇偶校验代码 (Rev. E) PDF | HTML 英语版 (Rev.E) PDF | HTML 2023-4-27
应用简报 Choosing PoE PSE System Software Solutions PDF | HTML 2021-8-3
测试报告 TPS23881 PoE2 Test Report 2020-5-26
技术文章 The ABCs and 123s of PoE PDF | HTML 2020-4-17
技术文章 Get more out of your power supply with port power management PDF | HTML 2019-11-11
模拟设计期刊 Challenges and solutions for PoE systems in Ethernet switches 2019-9-30

设计与开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估板

PSEMTHR24EVM-081 — 适用于 24 端口 IEEE 802.3bt 就绪型 PSE 系统的主板

PSEMTHR24EVM-081 是 TPS23881 和 TPS23882 PSE 控制器的基板。该基板包含 24 个 2 线对/4 线对端口,可用于发送高达 30W/端口(对于 IEEE 802.3at 应用)和 90W/端口(对于 IEEE 802.3bt 应用)的功率。

支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
开发套件

BOOST-PSEMTHR-007 — 适用于 IEEE 802.3bt 就绪型 PoE PSE 应用的 TPS2388x 主板

BOOST-PSEMTHR-007 是 TPS23880 和 TPS23881 PSE 控制器的基板。该基板包含四个 2 线对端口,可用于为 IEEE 802.3at 应用发送高达 30W/端口的功率;此外,还有两个 4 线对端口,可用于为 IEEE 802.3bt 应用发送高达 90W/端口的功率。

用户指南: PDF
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
子卡

PSEMCUDAUEVM-082 — 适用于 24 端口 IEEE 802.3bt 就绪型 PSE 系统的 MCU 子卡

PSEMCUDAUEVM-082 是 TI 的 TPS23881 和 TPS23882 24 端口参考设计的 MSP430 MCU 子卡。该子卡以及 GUI 可支持使用 TI 的生产就绪型系统固件 FirmPSE(可提供端口电源管理等系统特性)和多个电源。

支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
子卡

TPS23881EVM-008 — 适用于 IEEE 802.3bt 就绪型 PoE PSE 应用的 TPS23881 子卡

TPS23881EVM-008 是用于评估 TPS23881 的子卡,后者是一款带有 200mΩ 感应电阻器的 4 线对 4 类 8 通道以太网供电 (PoE) PSE。该子卡可为适用于高功率 PSE 应用(如园区和分支交换机、网络录像机)的 TPS23881 提供评估和参考电路。

用户指南: PDF
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
子卡

TPS23881EVM-083 — 适用于 24 端口 PSE 系统的 IEEE 802.3bt 就绪型 PSE 子卡

TPS23881EVM-008 是用于评估 TPS23881 的 24 端口(48 通道)子卡,后者是一款带有 200mΩ 传感电阻器的 4 线对 4 类 8 通道以太网供电 (PoE) PSE。该子卡可为高端口数应用(如园区和分支交换机、网络录像机)中的 TPS23881 提供评估和参考电路。

支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
代码示例或演示

SLVC771 — TPS23881 PoE MSP430 Reference Code for Basic Application

支持的产品和硬件
评估模块 (EVM) 用 GUI

SLVC772 — TPS2388x EVM GUI

支持的产品和硬件
参考设计

TIDA-050026-23881 — 用于多端口应用的 24 端口(PoE 2,4 线对)电源设备参考设计

此参考设计展示了一款适用于以太网供电 (PoE) 应用的 4 类(PoE 2、4 对线)24 端口以太网交换机,该交换机可为 IEEE 802.3bt (PoE 2) 应用的每个端口发送高达 90W 的功率,为非标准应用的每个端口发送高达 120W 的功率。我们用于此设计的 FirmPSE 系统软件基于 MSP430F523x 和 MSPM0G1107x 系列,可通过实现与系统的实时通信和固件定制来缩短上市时间并释放宝贵的软件资源。此设计支持具有优先级、多个电源、传统 PD 检测、现场升级、与主机的 UART/I2C (...)

支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
VQFN (RTQ) 56 Ultra Librarian

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

所有内容均由 TI 和社区贡献者按“原样”提供,并不构成 TI 规范。请参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持。​​​​​​​​​​​​​​

视频