主页 电源管理 直流/直流开关稳压器 DC/DC converters

TLV62565

正在供货

采用 SOT23 封装的 1.5A 降压转换器

可提供此产品的更新版本

open-in-new 比较替代产品
功能与比较器件相同且具有相同引脚。
TLV62569 正在供货 采用 SOT23 或 SOT563 封装的 2.5V-5.5V 输入、2A 高效降压转换器 2-A cost-optimized buck converter in SOT-23 (pin-to-pin) and SOT563 package.
TLV62568 正在供货 采用 SOT23 或 SOT563 封装的 2.5V 至 5.5V 输入、1A 高效降压转换器 1-A cost-optimized buck converter in SOT-23 (pin-to-pin) and SOT563 package.
功能与比较器件相同但引脚有所不同。
TPS62A02 正在供货 采用 SOT563 和 SOT23 封装的 2.5V 至 5.5V 输入、2A 高效降压转换器 Higher output voltage accuracy with output discharge

产品详情

Rating Catalog Topology Buck Iout (max) (A) 1.5 Vin (max) (V) 5.5 Vin (min) (V) 2.7 Vout (max) (V) 5.2 Vout (min) (V) 0.6 Features Enable, Light load efficiency, Synchronous Rectification Control mode Constant on-time (COT) Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.00005 Duty cycle (max) (%) 95
Rating Catalog Topology Buck Iout (max) (A) 1.5 Vin (max) (V) 5.5 Vin (min) (V) 2.7 Vout (max) (V) 5.2 Vout (min) (V) 0.6 Features Enable, Light load efficiency, Synchronous Rectification Control mode Constant on-time (COT) Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.00005 Duty cycle (max) (%) 95
SOT-23 (DBV) 5 8.12 mm² (2.9 mm × 2.8 mm)
  • 2.7-V to 5.5-V Input Voltage Range
  • 1.5-MHz Typical Switching Frequency
  • Output Current up to 1.5 A (Max)
  • Adaptive On-Time Current Control
  • Power Save Mode for Light Load Efficiency
  • 50-µA Operating Quiescent Current
  • Up to 95% Efficiency
  • Over Current Protection
  • 95% Maximum Duty Cycle
  • Excellent AC and Transient Load Response
  • Power Good Output, TLV62566
  • Internal Soft Startup of 250 µs (Typ)
  • Adjustable Output Voltage
  • Thermal Shutdown Protection
    • Portable Devices
    • DSL Modems
    • Hard Disk Drivers
    • Set Top Box
    • Tablet

All trademarks are the property of their respective owners.

  • 2.7-V to 5.5-V Input Voltage Range
  • 1.5-MHz Typical Switching Frequency
  • Output Current up to 1.5 A (Max)
  • Adaptive On-Time Current Control
  • Power Save Mode for Light Load Efficiency
  • 50-µA Operating Quiescent Current
  • Up to 95% Efficiency
  • Over Current Protection
  • 95% Maximum Duty Cycle
  • Excellent AC and Transient Load Response
  • Power Good Output, TLV62566
  • Internal Soft Startup of 250 µs (Typ)
  • Adjustable Output Voltage
  • Thermal Shutdown Protection
    • Portable Devices
    • DSL Modems
    • Hard Disk Drivers
    • Set Top Box
    • Tablet

All trademarks are the property of their respective owners.

The TLV62565/6 devices are synchronous step-down converters optimized for small solution size and high efficiency. The devices integrate switches capable of delivering an output current up to 1.5 A.

The devices are based on an adaptive on time with valley current mode control scheme. Typical operating frequency is 1.5 MHz at medium to heavy loads. The devices are optimized to achieve very low output voltage ripple even with small external components and feature an excellent load transient response.

During light load, the TLV62565/6 automatically enter into Power Save Mode at the lowest quiescent current (50 µA typ) to maintain high efficiency over the entire load current range. In shutdown, the current consumption is reduced to less than 1 µA.

The TLV62565/6 provide an adjustable output voltage via an external resistor divider. The output voltage start-up ramp is controlled by an internal soft start, typically 250 µs. Power sequencing is possible by configuring the Enable (TLV62565) and Power Good (TLV62566) pins. Other features like over current protection and over temperature protection are built-in. The TLV62565/6 devices are available in a SOT-23 5-pin package.

The TLV62565/6 devices are synchronous step-down converters optimized for small solution size and high efficiency. The devices integrate switches capable of delivering an output current up to 1.5 A.

The devices are based on an adaptive on time with valley current mode control scheme. Typical operating frequency is 1.5 MHz at medium to heavy loads. The devices are optimized to achieve very low output voltage ripple even with small external components and feature an excellent load transient response.

During light load, the TLV62565/6 automatically enter into Power Save Mode at the lowest quiescent current (50 µA typ) to maintain high efficiency over the entire load current range. In shutdown, the current consumption is reduced to less than 1 µA.

The TLV62565/6 provide an adjustable output voltage via an external resistor divider. The output voltage start-up ramp is controlled by an internal soft start, typically 250 µs. Power sequencing is possible by configuring the Enable (TLV62565) and Power Good (TLV62566) pins. Other features like over current protection and over temperature protection are built-in. The TLV62565/6 devices are available in a SOT-23 5-pin package.

下载 观看带字幕的视频 视频

设计与开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估板

DLPDLCR4710EVM-G2 — 全高清 DLP4710 芯片组评估模块

DLP® LightCrafter Display 4710 EVM-G2 是一款易于使用的即插即用型评估平台,适用于全高清 DLP4710 芯片组。DLP4710 芯片组设计用于多种显示应用,如便携式投影仪、无屏电视、交互式显示器和数字标牌。DLP4710 芯片组由 DLP4710(0.47 英寸 1080p)全高清 DMD、DLPC3439 显示控制器和 DLPA3005 PMIC/LED 驱动器组成。此 EVM 配有生产就绪型光学引擎并以小巧外形实现了分辨率(全高清)、亮度和可编程性的完美结合。

DLPDLCR4710EVM-G2 工具包括电路板、光学引擎、DMD、柔性电缆和 LED (...)
用户指南: PDF | HTML
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
评估板

TLV62565EVM-179 — TLV62565EVM-179 评估模块

此 EVM 用于帮助用户轻松评估和测试 TLV62565 的操作和功能。
用户指南: PDF
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
仿真模型

TLV62565 PSpice Transient Model

SLVMA94.ZIP (64 KB) - PSpice 模型
支持的产品和硬件
计算工具

SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
支持的产品和硬件
参考设计

PMP40154 — 带 HDMI 输出的 USB Type-C™ 和 USB PD DRP 参考设计

PMP40154 是真正的 USB Type-C™ 和 USB PD DRP 参考设计。  此参考设计支持 USB Type-C™ 输入转 HDMI 输出显示器。它采用了 USB PD 控制器和电源开关 TPS65986 以及交替模式 MUX HD3SS460。它可与所有标准 USB Type-C™ 产品完全兼容,并向后兼容传统器件和适配器。该设计包括 TPD8S300、TPD4E02B04 等一些 IEC ESD 器件。这些器件能将系统与连接器上存在的高压条件隔离开来。
支持的产品和硬件
参考设计

TIDA-010011 — 适用于保护继电器处理器模块的高效电源架构参考设计

该参考设计展示了各种电源架构,这些架构可为需要 >1A 负载电流和高效率的应用处理器模块生成多个电压轨。所需的电源通过来自背板的 5V、12V 或 24V 直流输入生成。电源通过带集成 FET 的直流/直流转换器生成并且使用带集成电感器的电源模块以减小尺寸。此设计采用 HotRod™ 封装类型,适用于需要低 EMI 的应用,也非常适合设计时间受限的应用。其他功能包括 DDR 端接稳压器、输入电源 OR-ing、电压时序控制、过载保护电子保险丝以及电压和负载电流监控。该设计可以用于处理器、数字信号处理器和现场可编程门阵列。该设计已依照 CISPR22 标准针对辐射发射进行了测试,符合 A (...)
支持的产品和硬件
参考设计

TIDA-01226 — 采用 DLP Pico 技术的紧凑型全高清 1080p(高达 16A)投影显示参考设计

此参考设计采用 DLP Pico™ 0.47 英寸 TRP 全高清 1080p 显示屏芯片组,并在 DLP LightCrafter Display 4710 G2 评估模块 (EVM) 中实施、支持将全高清分辨率用于投影显示应用,例如辅助投影仪、无屏显示、交互式显示、可穿戴设备(包括头戴式显示)、标牌、工业和医疗显示。设计中采用的芯片组包括 DLP4710 (.47 1080p) DMD、DLPC3439 显示控制器和 DLPA3005 PMIC/LED 驱动器。
支持的产品和硬件
参考设计

TIDEP0020 — AM437x 分立式电源参考设计

Sitara AM437x 的简化电源时序功能为电源设计人员提供了灵活性。此参考设计实现方案是一款针对 AM437x 处理器进行 BOM 优化的分立式电源解决方案,采用最少数量的分立式 IC 和基本功能集。该解决方案代表了一个分立式电源解决方案的基线,可针对 AM437x 处理器的更多特性和功能进行扩展。

 

支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
SOT-23 (DBV) 5 Ultra Librarian

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

所有内容均由 TI 和社区贡献者按“原样”提供,并不构成 TI 规范。请参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持。​​​​​​​​​​​​​​

视频