主页 音频、触觉与压电 音频放大器 扬声器、电视和条形音频放大器
主页
音频、触觉与压电
音频放大器
扬声器、电视和条形音频放大器

TAS5715

正在供货

具有 EQ、DRC 和 HP 的 25W 立体声、8V 至 26V、数字输入、开环 D 类音频放大器

立即订购
数据表

TAS5715

正在供货
数据表 立即订购

产品详情

Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface Software Output power (W) 25 Power stage supply (max) (V) 26 Power stage supply (min) (V) 8 RDS(on) (Ω) 0.11 THD + N at 1 kHz (%) 0.03 Load (min) (Ω) 4 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 3.6 Rating Catalog Operating temperature range (°C) 0 to 85
Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface Software Output power (W) 25 Power stage supply (max) (V) 26 Power stage supply (min) (V) 8 RDS(on) (Ω) 0.11 THD + N at 1 kHz (%) 0.03 Load (min) (Ω) 4 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 3.6 Rating Catalog Operating temperature range (°C) 0 to 85
HTQFP (PHP) 48 81 mm² (9 mm × 9 mm)
  • Audio Input/Output
    • 25-W Into an 8- Load From an 18-V Supply
    • 50-W Support in PBTL Mode With 4- Load
    • Wide PVDD Range, From 8 V to 26 V
    • Efficient Class-D Operation Eliminates Need for Heatsinks
    • Requires Only 3.3 V and PVDD
    • One Serial Audio Input (Two Audio Channels)
    • I2C Address Selection via PIN (Chip Select)
    • Supports 8-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
    • Headphone PWM Outputs
    • Dedicated Pin for External Headphone-Amplifier Shutdown
    • Single-Filter PBTL Support
  • Audio/PWM Processing
    • Independent Channel Volume Controls With 24-dB to Mute
    • Independent Headphone Volume
    • Programmable Two-Band Dynamic Range Control
    • Up to Eight User-Programmable Biquads per Channel
    • Programmable Coefficients for DRC Filters
    • DC Blocking Filters and PWM DC Detect
    • CRC Checksum to Detect Biquad Coefficient Corruption
  • General Features
    • Serial Control Interface Operational Without MCLK
    • Factory-Trimmed Internal Oscillator for Automatic Rate Detection
    • Surface Mount, 48-Pin, 7-mm × 7-mm HTQFP Package
    • Thermal and Short-Circuit Protection
  • Benefits
    • EQ: Speaker Equalization Improves Audio Performance
    • DRC: Automatic Gain Limiter. Can Be Used As Power Limiter.
      Enables Speaker Protection, Easy Listening
    • Two-Band DRC: Set Two Different Thresholds for Low- and
      High-Frequency Content
    • Autobank Switching: Preload Coefficients for Different
      Sample Rates. No Need to Write New Coefficients to the
      Part When Sample Rate Changes
    • Autodetect: Automatically Detects Sample-Rate Changes.
      No Need for External Microprocessor Intervention
    • Single-Filter PBTL Support Reduces BOM Cost
    • Thgermal Dissipation, Improving System Stability
  • Audio Input/Output
    • 25-W Into an 8- Load From an 18-V Supply
    • 50-W Support in PBTL Mode With 4- Load
    • Wide PVDD Range, From 8 V to 26 V
    • Efficient Class-D Operation Eliminates Need for Heatsinks
    • Requires Only 3.3 V and PVDD
    • One Serial Audio Input (Two Audio Channels)
    • I2C Address Selection via PIN (Chip Select)
    • Supports 8-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
    • Headphone PWM Outputs
    • Dedicated Pin for External Headphone-Amplifier Shutdown
    • Single-Filter PBTL Support
  • Audio/PWM Processing
    • Independent Channel Volume Controls With 24-dB to Mute
    • Independent Headphone Volume
    • Programmable Two-Band Dynamic Range Control
    • Up to Eight User-Programmable Biquads per Channel
    • Programmable Coefficients for DRC Filters
    • DC Blocking Filters and PWM DC Detect
    • CRC Checksum to Detect Biquad Coefficient Corruption
  • General Features
    • Serial Control Interface Operational Without MCLK
    • Factory-Trimmed Internal Oscillator for Automatic Rate Detection
    • Surface Mount, 48-Pin, 7-mm × 7-mm HTQFP Package
    • Thermal and Short-Circuit Protection
  • Benefits
    • EQ: Speaker Equalization Improves Audio Performance
    • DRC: Automatic Gain Limiter. Can Be Used As Power Limiter.
      Enables Speaker Protection, Easy Listening
    • Two-Band DRC: Set Two Different Thresholds for Low- and
      High-Frequency Content
    • Autobank Switching: Preload Coefficients for Different
      Sample Rates. No Need to Write New Coefficients to the
      Part When Sample Rate Changes
    • Autodetect: Automatically Detects Sample-Rate Changes.
      No Need for External Microprocessor Intervention
    • Single-Filter PBTL Support Reduces BOM Cost
    • Thgermal Dissipation, Improving System Stability

The TAS5715 is a 25-W, efficient, digital audio-power amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.

The TAS5715 is a slave-only device receiving all clocks from external sources. The TAS5715 operates with a PWM carrier between a 384-kHz switching rate and a 352-KHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20  kHz.

The TAS5715 is a 25-W, efficient, digital audio-power amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.

The TAS5715 is a slave-only device receiving all clocks from external sources. The TAS5715 operates with a PWM carrier between a 384-kHz switching rate and a 352-KHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20  kHz.
filter 查找其他 扬声器、电视和条形音频放大器
下载 观看带字幕的视频 视频

具有 EQ 和三频带 AGL 的下一代 20W 立体声、16V 开环数字输入音频 D 类放大器：  TAS5733L

具有 EQ 和三频带 AGL 的下一代 25W 立体声、26V 开环数字输入音频 D 类放大器：  TAS5751M

具有 EQ、三频带 AGL 和耳机输出的下一代 25W 立体声、26V 开环数字输入音频 D 类放大器：  TAS5753MD

技术文档

未找到结果。请清除搜索并重试。
查看全部 5
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 TAS5715 20-W DIGITAL AUDIO POWER AMPLIFIER WITH EQ AND AGL 数据表 2009-5-5
应用手册 Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) 2019-8-26
应用手册 AN-1849 An Audio Amplifier Power Supply Design (Rev. C) 2019-6-27
应用手册 AN-1737 Managing EMI in Class D Audio Applications (Rev. A) 2013-5-1
用户指南 25W Digital Input Amplifier With EQ and 2-Band DRC, TAS5715 2010-10-27

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

TAS5715EVM — TAS5715EVM 评估模块

TAS5715EVM 评估模块可演示 TAS5715PHP 的功能。TAS5715 将 25W 立体声 D 类音频功率放大器与耳机 PWM 输出相结合。该 EVM 和附带的材料使用户可以使用双频带 DRC、可编程 EQ、数字 THD 管理器进行试验。有关 TAS5715 功能的详细信息，请参阅 TI.com 上提供的数据表。

支持的产品和硬件
有库存
限制：
??asset.out-of-stock-ti_zh_CN??
无货
评估模块 (EVM) 用 GUI

SLOC228 — TAS57X_v3.2_Build_7 GUI Setup

支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
HTQFP (PHP) 48 Ultra Librarian
适用于评估类项目的 TI 标准条款与条件。

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

查看全部论坛主题 查看英文版全部论坛主题

所有内容均由 TI 和社区贡献者按“原样”提供，并不构成 TI 规范。请参阅使用条款。

如果您对质量、包装或订购 TI 产品有疑问，请参阅 TI 支持。​​​​​​​​​​​​​​

视频