主页 接口 RS-232 收发器
主页
接口
RS-232 收发器

SN75LBC241

正在供货

低功耗 LinBiCMOS 多路驱动器和接收器

立即订购
数据表

SN75LBC241

正在供货
数据表 立即订购

产品详情

Drivers per package 4 Receivers per package 5 Logic voltage (min) (V) 5 Data rate (max) (Mbps) 0.1 Main supply voltage (nom) (V) 5 ESD HBM (kV) 0 Rating Catalog Operating temperature range (°C) 0 to 70 Vout (typ) (V) 9
Drivers per package 4 Receivers per package 5 Logic voltage (min) (V) 5 Data rate (max) (Mbps) 0.1 Main supply voltage (nom) (V) 5 ESD HBM (kV) 0 Rating Catalog Operating temperature range (°C) 0 to 70 Vout (typ) (V) 9
SOIC (DW) 28 184.37 mm² (17.9 mm × 10.3 mm)
  • Operates With Single 5-V Power Supply
  • Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU Recommendation V.28
  • Improved Performance Replacement for MAX241
  • Operates at Data Rates up to 100 kbit/s Over a 3-m Cable
  • Low-Power Shutdown Mode... 1 uA Typ
  • LinBiCMOSTM Process Technology
  • Four Drivers and Five Receivers
  • ±30-V Input Levels
  • 3-State TTL/CMOS Receiver Outputs
  • ±9-V Output Swing With a 5-V Supply
  • Applications
    • TIA/EIA-232-F Interface
    • Battery-Powered Systems
    • Terminals
    • Modems
    • Computers
  • Packaged in Plastic Small-Outline Package

LinBiCMOS and LinASIC are trademarks of Texas Instruments.
  • Operates With Single 5-V Power Supply
  • Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU Recommendation V.28
  • Improved Performance Replacement for MAX241
  • Operates at Data Rates up to 100 kbit/s Over a 3-m Cable
  • Low-Power Shutdown Mode... 1 uA Typ
  • LinBiCMOSTM Process Technology
  • Four Drivers and Five Receivers
  • ±30-V Input Levels
  • 3-State TTL/CMOS Receiver Outputs
  • ±9-V Output Swing With a 5-V Supply
  • Applications
    • TIA/EIA-232-F Interface
    • Battery-Powered Systems
    • Terminals
    • Modems
    • Computers
  • Packaged in Plastic Small-Outline Package

LinBiCMOS and LinASIC are trademarks of Texas Instruments.

The SN75LBC241 is a low-power LinBiCMOSTM line-interface device containing four independent drivers and five receivers. It is designed as a plug-in replacement for the Maxim MAX241. The SN75LBC241 provides a capacitive-charge-pump voltage generator to produce RS-232 voltage levels from a 5-V supply. The charge-pump oscillator frequency is 20 kHz. Each receiver converts RS-232 inputs to 5-V TTL/CMOS levels. The receivers have a typical threshold of 1.2 V and a typical hysteresis of 0.5 V and can accept ±30-V inputs. Each driver converts TTL/CMOS input levels into RS-232 levels.

The SN75LBC241 includes a receiver, a 3-state control line, and a low-power shutdown control line. When the EN\ line is high, receiver outputs are placed in the high-impedance state. When EN\ is low, normal operation is enabled.

The shutdown mode reduces power dissipation to less than 5 uW, typically. In this mode, receiver outputs have high impedance, driver outputs are turned off, and the charge-pump circuit is turned off. When SHUTDOWN is high, the shutdown mode is enabled. When SHUTDOWN is low, normal operation is enabled.

This device has been designed to conform to TIA/EIA-232-F and ITU Recommendation V.28.

The SN75LBC241 has been designed using LinBiCMOS technology and cells contained in the Texas Instruments LinASICTM library. Use of LinBiCMOS circuitry increases latch-up immunity in this device over an all-CMOS design.

The SN75LBC241 is characterized for operation from 0°C to 70°C.

The SN75LBC241 is a low-power LinBiCMOSTM line-interface device containing four independent drivers and five receivers. It is designed as a plug-in replacement for the Maxim MAX241. The SN75LBC241 provides a capacitive-charge-pump voltage generator to produce RS-232 voltage levels from a 5-V supply. The charge-pump oscillator frequency is 20 kHz. Each receiver converts RS-232 inputs to 5-V TTL/CMOS levels. The receivers have a typical threshold of 1.2 V and a typical hysteresis of 0.5 V and can accept ±30-V inputs. Each driver converts TTL/CMOS input levels into RS-232 levels.

The SN75LBC241 includes a receiver, a 3-state control line, and a low-power shutdown control line. When the EN\ line is high, receiver outputs are placed in the high-impedance state. When EN\ is low, normal operation is enabled.

The shutdown mode reduces power dissipation to less than 5 uW, typically. In this mode, receiver outputs have high impedance, driver outputs are turned off, and the charge-pump circuit is turned off. When SHUTDOWN is high, the shutdown mode is enabled. When SHUTDOWN is low, normal operation is enabled.

This device has been designed to conform to TIA/EIA-232-F and ITU Recommendation V.28.

The SN75LBC241 has been designed using LinBiCMOS technology and cells contained in the Texas Instruments LinASICTM library. Use of LinBiCMOS circuitry increases latch-up immunity in this device over an all-CMOS design.

The SN75LBC241 is characterized for operation from 0°C to 70°C.
filter 查找其他 RS-232 收发器
下载

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相同但引脚有所不同。
MAX211 正在供货 具有 +/-9V 输出和 +/-15kV ESD 保护的 5V 多通道 120kbps RS-232 线路驱动器/接收器 Improved 15kV HBM

技术文档

未找到结果。请清除搜索并重试。
查看全部 1
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 Low-Power LinBiCMOS Multiple Drivers And Receivers 数据表 (Rev. F) 2001-2-14

订购和质量

支持和培训