SN65LVCP22

正在供货

2x2 交叉点开关：LVDS 输出

立即订购

数据表

document-pdfAcrobat 2x2 1000 Mbps LVDS Crosspoint Switch 数据表 (Rev. B) (英语)

SN65LVCP22

正在供货

数据表

立即订购

产品详情

Function

Crosspoint

Protocols

CML, LVDS, LVPECL

Number of transmitters

2

Number of receivers

2

Signaling rate (Mbps)

1000

Input signal

CML, LVDS, LVPECL

Output signal

LVDS

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Function

Crosspoint

Protocols

CML, LVDS, LVPECL

Number of transmitters

2

Number of receivers

2

Signaling rate (Mbps)

1000

Input signal

CML, LVDS, LVPECL

Output signal

LVDS

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SOIC (D)

16

59.4 mm² (9.9 mm × 6 mm)

TSSOP (PW)

16

32 mm² (5 mm × 6.4 mm)

High Speed (>1000 Mbps) Upgrade for DS90CP22 2x2 LVDS Crosspoint Switch
LVPECL Crosspoint Switch Available in SN65LVCP23
Low-Jitter Fully Differential Data Path
50 ps (Typ), of Peak-to-Peak Jitter With PRBS = 2²³–1 Pattern
Less Than 200 mW (Typ), 300 mW (Max) Total Power Dissipation
Output (Channel-to-Channel) Skew Is 10 ps (Typ), 50 ps (Max)
Configurable as 2:1 Mux, 1:2 Demux, Repeater or 1:2 Signal Splitter
Inputs Accept LVDS, LVPECL, and CML Signals
Fast Switch Time of 1.7 ns (Typ)
Fast Propagation Delay of 0.65 ns (Typ)
16 Lead SOIC and TSSOP Packages
Inter-Operates With TIA/EIA–644–A LVDS Standard
Operating Temperature: –40°C to 85°C
APPLICATIONS
- Base Stations
- Add/Drop Muxes
- Protection Switching for Serial Backplanes
- Network Switches/Routers
- Optical Networking Line Cards/Switches
- Clock Distribution

High Speed (>1000 Mbps) Upgrade for DS90CP22 2x2 LVDS Crosspoint Switch
LVPECL Crosspoint Switch Available in SN65LVCP23
Low-Jitter Fully Differential Data Path
50 ps (Typ), of Peak-to-Peak Jitter With PRBS = 2²³–1 Pattern
Less Than 200 mW (Typ), 300 mW (Max) Total Power Dissipation
Output (Channel-to-Channel) Skew Is 10 ps (Typ), 50 ps (Max)
Configurable as 2:1 Mux, 1:2 Demux, Repeater or 1:2 Signal Splitter
Inputs Accept LVDS, LVPECL, and CML Signals
Fast Switch Time of 1.7 ns (Typ)
Fast Propagation Delay of 0.65 ns (Typ)
16 Lead SOIC and TSSOP Packages
Inter-Operates With TIA/EIA–644–A LVDS Standard
Operating Temperature: –40°C to 85°C
APPLICATIONS
- Base Stations
- Add/Drop Muxes
- Protection Switching for Serial Backplanes
- Network Switches/Routers
- Optical Networking Line Cards/Switches
- Clock Distribution

The SN65LVCP22 is a 2x2 crosspoint switch providing greater than 1000 Mbps operation for each path. The dual channels incorporate wide common-mode (0 V to 4 V) receivers, allowing for the receipt of LVDS, LVPECL, and CML signals. The dual outputs are LVDS drivers to provide low-power, low-EMI, high-speed operation. The SN65LVCP22 provides a single device supporting 2:2 buffering (repeating), 1:2 splitting, 2:1 multiplexing, 2x2 switching, and LVPECL/CML to LVDS level translation on each channel. The flexible operation of the SN65LVCP22 provides a single device to support the redundant serial bus transmission needs (working and protection switching cards) of fault–tolerant switch systems found in optical networking, wireless infrastructure, and data communications systems. TI offers additional gigibit repeater/translator and crosspoint products in the SN65LVDS100 and SN65LVDS122.

The SN65LVCP22 uses a fully differential data path to ensure low-noise generation, fast switching times, low pulse width distortion, and low jitter. Output channel-to-channel skew is less than 10 ps (typ) and 50 ps (max) to ensure accurate alignment of outputs in all applications. Both SOIC and TSSOP package options are available to allow easy upgrade for existing solutions, and board area savings where space is critical.

The SN65LVCP22 is a 2x2 crosspoint switch providing greater than 1000 Mbps operation for each path. The dual channels incorporate wide common-mode (0 V to 4 V) receivers, allowing for the receipt of LVDS, LVPECL, and CML signals. The dual outputs are LVDS drivers to provide low-power, low-EMI, high-speed operation. The SN65LVCP22 provides a single device supporting 2:2 buffering (repeating), 1:2 splitting, 2:1 multiplexing, 2x2 switching, and LVPECL/CML to LVDS level translation on each channel. The flexible operation of the SN65LVCP22 provides a single device to support the redundant serial bus transmission needs (working and protection switching cards) of fault–tolerant switch systems found in optical networking, wireless infrastructure, and data communications systems. TI offers additional gigibit repeater/translator and crosspoint products in the SN65LVDS100 and SN65LVDS122.

The SN65LVCP22 uses a fully differential data path to ensure low-noise generation, fast switching times, low pulse width distortion, and low jitter. Output channel-to-channel skew is less than 10 ps (typ) and 50 ps (max) to ensure accurate alignment of outputs in all applications. Both SOIC and TSSOP package options are available to allow easy upgrade for existing solutions, and board area savings where space is critical.

filter

查找其他 LVDS、M-LVDS 和 PECL IC

下载观看带字幕的视频视频