SN65DP159
- AC-coupled TMDS or DisplayPort Dual-Mode Physical Layer Input to HDMI2.0b TMDS Physical Layer Output Supporting up to 6 Gbps Data Rate, Compatible with HDMI2.0b Electrical Parameters
- Supporting DisplayPort Dual-Mode Standard Version 1.1
- Adaptive Receiver Equalizer and Programmable Fixed Equalizer up to 16.5 dB
- High Speed Lane Control, Pre-emphasis and Transmit Swing, and Slew Rate Control
- I2C or Pin Strap Programmable
- Supports Type-2 I2C-over-AUX to DDC Bridge
- Integrated TMDS Level Translator and CDR
- Active I2C[4] Buffer
- Input Swap on Main Lanes
- Low Power Consumption
- Low Power
Consumption
- –435 mW Active at 6-Gbps and –10 mW at Shutdown State
- Both Extended Commercial and Industrial Temperature Device Options
- 40-pin, 0.4 mm Pitch, 5 mm x 5 mm, WQFN Package, Pin Compatible to the TPD158 Redriver
- 40-pin, 0.5 mm Pitch, 7 mm x 7 mm, VQFN Package
The SNx5DP159 device is a dual mode[1] DisplayPort to transition-minimized differential signal (TMDS) retimer supporting digital video interface (DVI) 1.0 and high-definition multimedia interface (HDMI) 1.4b and 2.0b output signals. The SNx5DP159 device supports the dual mode standard version 1.1 type 1 and type 2 through the DDC link or AUX channel. The SNx5DP159 device supports data rate up to 6-Gbps per data lane to support Ultra HD (4K × 2K / 60-Hz) 8-bits per color high-resolution video and HDTV with 16-bit color depth at 1080p (1920 × 1080 / 60-Hz). The SNx5DP159 device can automatically configure itself as a re-driver at data rates <1 Gbps, or as a retimer at more than this data rate. This feature can be turned off through I2C[4] programming.
For signal integrity, the SNx5DP159 device implements several features. The SNx5DP159 receiver supports both adaptive and fixed equalization to clean up inter-symbol interference (ISI) jitter or loss from the bandwidth-limited board traces or cables. When working as a retimer, the embedded clock data recovery (CDR) cleans up the input high frequency and random jitter from video source. The transmitter provides several features for passing compliance and reducing system-level design issues like de-emphasis, which compensates for the attenuation when driving long cables or high-loss board traces. The SNx5DP159 device also includes TMDS output amplitude adjust using an external resistor on the Vsadj pin, source termination selection, and output slew rate control. Device operation and configuration can be programmed by pin strapping or I2C[4].
The SNx5DP159 device implements several methods for power management and active power reduction.
The SNx5DP159 receiver uses several methods to determine whether the application supports HDMI1.4b[2] or HDMI2.0[3] data rates. The SNx5DP159 receiver comes in two packages: a 40-pin RSB supporting space-constrained applications and a 48-pin RGZ version supporting the full feature set for DisplayPort dual-mode standard version 1.1 in applications such as dongles.
The SN65DP159 device is characterized for an industrial operational temperature range from –40°C to 85°C.
The SN75DP159 device is characterized for an extended commercial operational temperature range from 0°C to 85°C.
技术文档
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | SNx5DP159 6-Gbps AC-Coupled TMDS™ to HDMI™ Level Shifter Retimer 数据表 (Rev. G) | PDF | HTML | 2020-3-17 | ||
| 应用手册 | 信号调节器和 USB 集线器高速布局指南 (Rev. A) | PDF | HTML | 英语版 (Rev.A) | PDF | HTML | 2026-1-14 | |
| 应用手册 | DP159 and DP149 Configuration Guide | 2019-12-13 | ||||
| 应用手册 | SN75DP159 Schematic Checklist | 2019-8-28 | ||||
| 用户指南 | Pattern Verifier and Generator User's Guide | 2018-4-27 | ||||
| 用户指南 | SNx5DP159RSB - TDP158RSB Transition Document (Rev. A) | 2018-2-26 | ||||
| 技术文章 | How to select a redriver or retimer for HDMI 2.0 jitter cleansing | PDF | HTML | 2017-5-1 | |||
| 用户指南 | EyeScan Tool User's Guide | 2016-12-1 | ||||
| 技术文章 | How to select the right retimer for HDMI 2.0 applications | PDF | HTML | 2016-9-27 | |||
| 技术文章 | How to reduce jitter and improve signal integrity in source and sink system design | PDF | HTML | 2016-7-11 | |||
| 技术文章 | HDMI 2.0: How to generate cleaner signals over long traces, connectors and cables | PDF | HTML | 2016-6-21 | |||
| 白皮书 | Build a true fidelity system using video signal conditioners | 2016-6-9 | ||||
| 应用手册 | DP159 as DisplayPort Retimer | 2015-8-3 |
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
DP159RGZEVM — DP159RGZEVM 评估模块
DP159RSBEVM 是一种 PCB，专为帮助客户评估 DP159 器件在视频应用中的性能而设计。 该 EVM 具有一个用于源端的 DP 连接和一个用于接收端的 HDMI 连接。 J2 是标准 DP 连接器 (Molex 47272-0001)。 P2 是标准 HDMI 连接器 (Molex 4715-10001)。 电路板上有 HDMI 源 (P1) 的第三个视频连接，DP159RGZEVM 上未安装此功能。
DP159RSBEVM — DP159RSBEVM 评估模块
DP159RSBEVM 是一种 PCB，专为帮助客户评估 DP159 器件在视频应用中的性能而设计。 该 EVM 具有一个用于源端的 DP 连接和一个用于接收端的 HDMI 连接。 J2 是标准 DP 连接器 (Molex 47272-0001)。 P2 是标准 HDMI 连接器 (Molex 4715-10001)。 电路板上有 HDMI 源 (P1) 的第三个视频连接，DP159RSBEVM 上未安装此功能。
SLLC455 — EyeScan Tool
TIDA-050001 — HDMI 2.0 ESD 保护参考设计
该参考设计旨在展示保护 HDMI 2.0 驱动器和重定时器的 TMDS 线免受静电放电 (ESD) 影响的两种不同方法。HDMI 标准用于从机顶盒到笔记本电脑再到电视的许多应用。鉴于这些端口几乎一直都暴露在外，所以比较容易发生 ESD 情况。高速 HDMI 2.0 信号意味着驱动器无法在 IC 中采取有效的 ESD 保护，因此需要安装独立的 ESD 保护设备。HDMI 驱动器通常还极为敏感，这意味着必须要采用超低钳位的 ESD 保护。该设计要符合两种设置的初始 HDMI 2.0 合规数据：每个电路板上进行的 ESD 测试和测试后的最终 HDMI 2.0 合规数据。如需更多有关保护 HDMI (...)
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| WQFN (RSB) | 40 | Ultra Librarian |
| VQFN (RGZ) | 48 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。