LMR70503
- Tiny 8-Bump Thin DSBGA Package: 0.84 mm × 1.615 mm × 0.6 mm
- 2.8 V to 5.5 V Input Voltage Range
- Adjustable Output Voltage: -0.9 V to -5.5 V
- 320 mA Switch Current Limit
- 500 kHz Minimum Switching Frequency
- Ground Referred Enable Input
- Under Voltage Lock Out (UVLO)
- No External Compensation
- Internal Soft Start
- 1 µA Shutdown Supply Current
- Small Output Voltage Ripple
- WEBENCH Enabled
Performance Benefits
- Easy To Use
- Tiny Overall Solution Size Reduces System Cost
SIMPLE SWITCHER is a trademark of Texas Instruments. WEBENCH is a trademark of Texas Instruments. All trademarks are the property of their respective owners.
The LMR70503 is a buck-boost converter with adjustable negative output voltage in a tiny 8-bump thin DSBGA package. Its unique control method is designed to provide fast transient response, low output noise, high efficiency, and tight regulation in the smallest possible PCB area. The LMR70503 has built in soft start, peak current limit, minimum switching frequency, and Under Voltage Lock Out (UVLO), with no external compensation required. For ease of use, the Enable pin is referred to the IC ground, instead of the lowest potential of the IC: the negative output voltage.
技术文档
设计与开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
LMR70503EVM — LMR70503 评估模块
TIDA-00431 — 采用 8GHz 直流耦合差分放大器的射频采样 4GSPS ADC 参考设计
宽带射频 (RF) 接收器有助于极大提高无线电设计的灵活性。较宽的瞬时带宽支持在不更改硬件的情况下实现灵活调优,并且能够以间隔较大的频率捕获多个通道。
该参考设计介绍了一款宽带射频接收器,该接收器采用 4GSPS 模数转换器 (ADC) 并具有一个 8GHz 直流耦合全差分放大器前端。放大器前端提供信号增益,并且能够捕获下行到直流的信号,而平衡-非平衡变压器耦合输入则无法做到这一点。
TIDA-00826 — 50 欧姆 2GHz 示波器前端参考设计
此参考设计是 50Ω 输入示波器应用的模拟前端的一部分。系统设计人员可随时使用此评估平台,处理频域和时域应用中从直流到 2GHz 的输入信号。
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| DSBGA (YFX) | 8 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。