主页 电源管理 直流/直流开关稳压器 直流/直流控制器

LM5117-Q1

正在供货

具有模拟电流监视器的汽车级 5.5-65V 宽输入电压、电流模式同步降压控制器

可提供此产品的更新版本

open-in-new 比较替代产品
功能与比较器件相同但引脚有所不同。
LM5145-Q1 正在供货 具有宽占空比范围的汽车类 75V 同步降压直流/直流控制器 Improved performance
LM5141-Q1 正在供货 汽车类宽输入 2.2MHz 低 IQ 同步降压控制器 Optional spread spectrum for improved EMI.

产品详情

Rating Automotive Topology Buck Iout (max) (A) 20 Vin (max) (V) 65 Vin (min) (V) 5.5 Vout (max) (V) 62 Vout (min) (V) 0.8 Control mode current mode Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Synchronous Rectification, Tracking, UVLO adjustable Duty cycle (max) (%) 98 Iq (typ) (A) 0.0048 Number of phases 1 Operating temperature range (°C) -40 to 125
Rating Automotive Topology Buck Iout (max) (A) 20 Vin (max) (V) 65 Vin (min) (V) 5.5 Vout (max) (V) 62 Vout (min) (V) 0.8 Control mode current mode Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Synchronous Rectification, Tracking, UVLO adjustable Duty cycle (max) (%) 98 Iq (typ) (A) 0.0048 Number of phases 1 Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 20 41.6 mm² (6.5 mm × 6.4 mm) WQFN (RTW) 24 16 mm² (4 mm × 4 mm)
  • LM5117-Q1 is Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: -40°C to 125°C
      Ambient Operating Temperature Range
  • Emulated Peak Current Mode Control
  • Wide Operating Range from 5.5 V to 65 V
  • Robust 3.3-A Peak Gate Drives
  • Adaptive Dead-Time Output Driver Control
  • Free-Run or Synchronizable Clock up to 750 kHz
  • Optional Diode Emulation Mode
  • Programmable Output from 0.8 V
  • Precision 1.5% Voltage Reference
  • Analog Current Monitor
  • Programmable Current Limit
  • Hiccup Mode Overcurrent Protection
  • Programmable Soft-Start and Tracking
  • Programmable Line Undervoltage Lockout
  • Programmable Switchover to External Bias Supply
  • Thermal Shutdown
  • LM5117-Q1 is Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: -40°C to 125°C
      Ambient Operating Temperature Range
  • Emulated Peak Current Mode Control
  • Wide Operating Range from 5.5 V to 65 V
  • Robust 3.3-A Peak Gate Drives
  • Adaptive Dead-Time Output Driver Control
  • Free-Run or Synchronizable Clock up to 750 kHz
  • Optional Diode Emulation Mode
  • Programmable Output from 0.8 V
  • Precision 1.5% Voltage Reference
  • Analog Current Monitor
  • Programmable Current Limit
  • Hiccup Mode Overcurrent Protection
  • Programmable Soft-Start and Tracking
  • Programmable Line Undervoltage Lockout
  • Programmable Switchover to External Bias Supply
  • Thermal Shutdown

The LM5117 is a synchronous buck controller intended for step-down regulator applications from a high voltage or widely varying input supply. The control method is based upon current mode control utilizing an emulated current ramp. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting and ease of loop compensation. The use of an emulated control ramp reduces noise sensitivity of the pulse-width modulation circuit, allowing reliable control of very small duty cycles necessary in high input voltage applications.

The operating frequency is programmable from 50 kHz to 750 kHz. The LM5117 drives external high-side and low-side NMOS power switches with adaptive dead-time control. A user-selectable diode emulation mode enables discontinuous mode operation for improved efficiency at light load conditions. A high voltage bias regulator that allows external bias supply further improves efficiency. The LM5117’s unique analog telemetry feature provides average output current information. Additional features include thermal shutdown, frequency synchronization, hiccup mode current limit, and adjustable line undervoltage lockout.

The LM5117 is a synchronous buck controller intended for step-down regulator applications from a high voltage or widely varying input supply. The control method is based upon current mode control utilizing an emulated current ramp. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting and ease of loop compensation. The use of an emulated control ramp reduces noise sensitivity of the pulse-width modulation circuit, allowing reliable control of very small duty cycles necessary in high input voltage applications.

The operating frequency is programmable from 50 kHz to 750 kHz. The LM5117 drives external high-side and low-side NMOS power switches with adaptive dead-time control. A user-selectable diode emulation mode enables discontinuous mode operation for improved efficiency at light load conditions. A high voltage bias regulator that allows external bias supply further improves efficiency. The LM5117’s unique analog telemetry feature provides average output current information. Additional features include thermal shutdown, frequency synchronization, hiccup mode current limit, and adjustable line undervoltage lockout.

下载 观看带字幕的视频 视频

设计与开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估板

LM5117EVAL — LM5117 评估板

The LM5117 evaluation board provides the design engineer with a fully functional synchronous buck converter based on Emulated Current Mode Control to evaluate the LM5117 controller IC. The evaluation board provides 12V output with a 9A current capability in addition with average output current (...)

用户指南: PDF
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
仿真模型

LM5117 PSpice Transient Model (Rev. A)

SNVM040A.ZIP (82 KB) - PSpice 模型
支持的产品和硬件
仿真模型

LM5117 Unencrypted PSpice Transient Model

SNVM960.ZIP (357 KB) - PSpice 模型
支持的产品和硬件
计算工具

LM5117QUICK-CALC — LM5117 快速入门计算器

支持的产品和硬件
参考设计

PMP30189 — 24V、300W 同步降压参考设计

PMP30189 参考设计基于 LM5117 同步降压转换器;11A 时提供 24V,并在 13.9A 时具有过流保护。内部偏置电流可以通过内部线性稳压器在内部提供,或者通过 BJT 和齐纳二极管在外部提供,从而减少了 LM5117 中的功率损耗。也可在 100KHz 与 250KHz 之间选择开关频率。可以使用外部跟踪输入执行排序和软启动跟踪。它还通过闩锁提供输出过压保护。
支持的产品和硬件
参考设计

PMP30301 — 12V、80W 同步降压参考设计

PMP30301 参考设计基于 LM5117 同步降压转换器;6.5A 时提供 12V,并在 7.4A 时具有过流保护。内部偏置电流可以通过内部线性稳压器在内部提供,或者通过 BJT 和齐纳二极管在外部提供,从而减少了 LM5117-Q1 中的功率损耗。也可在 100KHz 与 250KHz 之间选择开关频率。可以使用外部跟踪输入执行排序和软启动跟踪。它还通过闩锁提供输出过压保护。
支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
HTSSOP (PWP) 20 Ultra Librarian
WQFN (RTW) 24 Ultra Librarian

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

所有内容均由 TI 和社区贡献者按“原样”提供,并不构成 TI 规范。请参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持。​​​​​​​​​​​​​​

视频