LM5026
- Current-Mode Control
- Internal 100-V Start-Up Bias Regulator
- 3-A Compound Main Gate Driver
- High Bandwidth Optocoupler Interface
- Programmable Line Undervoltage Lockout (UVLO)
With Adjustable Hysteresis - Versatile Dual Mode Overcurrent Protection With
Hiccup Delay Timer - Programmable Overlap or Deadtime between the
Main and Active Clamp Outputs - Programmable Maximum Duty Cycle Clamp
- Programmable Soft-Start
- Leading Edge Blanking
- Resistor Programmed 1-MHz Capable Oscillator
- Oscillator Sync I/O Capability
- Precision 5-V Reference
The LM5026 PWM controller contains all of the features necessary to implement power converters utilizing the active clamp and reset technique with current-mode control. With the active clamp technique, higher efficiencies and greater power densities can be realized compared to conventional catch winding or RDC clamp and reset techniques. Two control outputs are provided, the main power switch control (OUT_A) and the active clamp switch control (OUT_B). The device can be configured to control either a P-Channel or N-Channel clamp switch. The main gate driver features a compound configuration, consisting of both MOS and Bipolar devices, providing superior gate drive characteristics. The LM5026 can be configured to operate with bias voltages over a wide input range of 8 V to 100 V. Additional features include programmable maximum duty cycle, line undervoltage lockout, cycle-by-cycle current limit, hiccup mode fault operation with adjustable timeout delay, PWM slope compensation, soft-start, 1-MHz capable oscillator with synchronization input and output capability, precision reference, and thermal shutdown.
技术文档
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | LM5026 Active Clamp Current Mode PWM Controller 数据表 (Rev. E) | PDF | HTML | 2015-11-30 | ||
| 选择指南 | 电源管理指南 2018 | 2018-7-31 | ||||
| 应用手册 | Operation and Benefits of Active-Clamp Forward Power Converters | 2007-3-22 |
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
PMP11478 — 30W 有源钳位正激式转换器参考设计
PMP11478 是一款隔离型有源钳位正向转换器，可接受 24 - 36V 电压范围，并以 2.5A 电流输出 12V 电压。此设计使用 LM5026 有源钳位电流模式控制器。采用 LMV431 并联稳压器和光耦合器反馈来保持输出电压调节。借助肖特基整流器可使用输出电容器存储的电荷实现 2.5ms 滞留。隔离电压为 2250VDC，符合基本绝缘要求。
PMP22075 — 具有 9V 至 60V 宽输入范围的高效率 12V、5A 有源钳位正向参考设计
此正向转换器参考设计专为隔离式 60W、12V 中间总线电压轨而设计。它在 9V 至 60V 的宽输入范围内工作。该设计采用 LM5026，这是 100V 有源钳位电流模式 PWM 控制器。采用具有 UCC27511 4A 和 8A 驱动器的自驱动次级整流器，以实现高效率。可用于需要高效率和断续保护的隔离电源应用。
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| WSON (NHQ) | 16 | Ultra Librarian |
| TSSOP (PW) | 16 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。