DP83847
- Low-power 3.3V, 0.18um CMOS technology
- Power consumption < 351mW (typical)
- 5V tolerant I/Os
- 5V/3.3V MAC interface
- IEEE 802.3 ENDEC, 10BASE-T transceivers and filters
- IEEE 802.3u PCS, 100BASE-TX transceivers and filters
- IEEE 802.3 compliant Auto-Negotiation
- Output edge rate control eliminates external filtering for Transmit outputs
- BaseLine Wander compensation
- IEEE 802.3u MII (16 pins/port)
- LED support (Link, Rx, Tx, Duplex, Speed, Collision)
- Single register access for complete PHY status
- 10/100 Mb/s packet loopback BIST (Built in Self Test)
- 56-pin LLP package (9w) x (9l) x (.75h) mm
PHYTER® is a registered trademark of National Semiconductor Corporation.
The DP83847 is a full feature single Physical Layer device with integrated PMD sublayers to support both 10BASE-T and 100BASE-TX Ethernet protocols over Category 3 (10 Mb/s) or Category 5 unshielded twisted pair cables.
The DP83847 is designed for easy implementation of 10/100 Mb/s Ethernet home or office solutions. It interfaces to Twisted Pair media via an external transformer. This device interfaces directly to MAC devices through the IEEE 802.3u standard Media Independent Interface (MII) ensuring interoperability between products from different vendors.
The DP83847 utilizes on chip Digital Signal Processing (DSP) technology and digital Phase Lock Loops (PLLs) for robust performance under all operating conditions, enhanced noise immunity, and lower external component count when compared to analog solutions.
技术文档
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | DP83847 DsPHYTER II - Single 10/100 Ethernet Transceiver 数据表 | 2004-5-14 | |||
| 应用手册 | How to Pass IEEE Ethernet Compliance Tests | PDF | HTML | 2021-9-20 | |||
| 应用手册 | AN-1470 DP83847 to DP83848C/I/YB PHYTER System Rollover Document (Rev. B) | 2013-4-26 | ||||
| 应用手册 | DP83847 to DP83848M/T/H PHYTER Mini System Rollover (Rev. B) | 2013-4-26 | ||||
| 应用手册 | Diff Between NSC 10/100 Mb/s Ethernet Physical Layer Devices (Rev. A) | 2013-4-26 | ||||
| 应用手册 | Dual Foot Print Layout Notes for DP83865 Gig PHYTER V & DP83847 DS PHYTER II (Rev. A) | 2013-4-26 | ||||
| 应用手册 | DP83847 DsPHYTER-II Rollover Document | 2012-2-28 | ||||
| 应用手册 | App Note 1470 DP83847 to DP83848C/I/YB PHYTER Sys Rollover Doc | 2006-10-9 | ||||
| 应用手册 | DP83847 to DP83848M/T/H PHYTER Mini System Rollover (cn) | 2006-10-9 |
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
ETHERNET-SW — 以太网 PHY 驱动程序和工具
德州仪器 (TI) 以太网物理层 (PHY) 收发器的驱动程序支持通过串行管理接口 (MDC/MDIO) 进行通信，从而配置和读取 PHY 寄存器。Linux 和 RTOS 驱动程序可在我们的 GitHub 上找到。
USB-2-MDIO — USB-2-MDIO Tool v1.0
借助 USB-2-MDIO 软件工具，德州仪器 (TI) 的以太网 PHY 可访问 MDIO 状态和器件控制寄存器。 USB-2-MDIO 工具包括一个 LaunchPad™ 开发套件，适用于与轻量级 GUI 连接的 TI MSP430™ MCU。 此 LaunchPad 开发套件实现了一个 MDIO 总线控制器，该控制器可以操作连接到总线的 PHY 上的寄存器。
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| WQFN (NJZ) | 56 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。