返回页首

产品详细信息

参数

我们无法显示此信息。请参阅产品 数据表

封装|引脚|尺寸

PDIP (N) 14 181 mm² 19.3 x 9.4 SOIC (DW) 16 77 mm² 7.52 x 10.28 open-in-new 查找其它 通用 运算放大器

特性

  • Direct Upgrades to TL05x, TL07x, and TL08x BiFET Operational Amplifiers
  • Greater Than 2× Bandwidth (10 MHz) and 3× Slew Rate (45 V/us) Than TL08x
  • On-Chip Offset Voltage Trimming for Improved DC Performance
  • Wider Supply Rails Increase Dynamic Signal Range to ±19 V

LinCMOS is a trademark of Texas Instruments.

open-in-new 查找其它 通用 运算放大器

描述

The TLE208x series of JFET-input operational amplifiers more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET operational amplifiers. The TLE208x also have wider supply-voltage rails, increasing the dynamic-signal range for BiFET circuits to ±19 V. On-chip zener trimming of offset voltage yields precision grades for greater accuracy in dc-coupled applications. The TLE208x are pin-compatible with lower performance BiFET operational amplifiers for ease in improving performance in existing designs.

BiFET operational amplifiers offer the inherently higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes these amplifiers better suited for interfacing with high-impedance sensors or very low level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.

Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input-voltage limits and output voltage swing when operating from a single supply. DC biasing of the input signal is required and loads should be terminated to a virtual ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET amplifiers from single supplies.

The TLE208x are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, Texas Instruments LinCMOS™ families of operational amplifiers (TLC- and TLV-prefix) are recommended. When moving from BiFET to CMOS amplifiers, particular attention should be paid to slew rate and bandwidth requirements and output loading.

For BiFET circuits requiring low noise and/or tighter dc precision, the TLE207x offer the same ac response as the TLE208x with more stringent dc and noise specifications.

open-in-new 查找其它 通用 运算放大器
下载
您可能感兴趣的类似产品
open-in-new 产品比较
功能相同,但与相比较的设备引脚不同或参数不等效:
TLV4172 正在供货 36V 单电源 10MHz 轨至轨输出运算放大器 This device is optimized for cost-sensitive applications.

技术文档

= 特色
未找到结果。请清除搜索,并重试。 查看所有 7
类型 标题 下载最新的英文版本 发布
* 数据表 Excalibur High-Speed JFET-Input Op Amps 数据表 2001年 6月 14日
技术文章 What is an op amp? 2020年 1月 21日
技术文章 Designing tiny microphone circuits with the industry’s smallest op amp 2018年 4月 12日
技术文章 How to lay out a PCB for high-performance, low-side current-sensing designs 2018年 2月 6日
解决方案指南 The Signal e-book: A compendium of blog posts on op amp design topics. 下载英文版本 2018年 1月 31日
技术文章 Low-side current sensing for high-performance cost-sensitive applications 2018年 1月 22日
应用手册 TLE2081, TLE2082, TLE2084 EMI Immunity Performance 2013年 12月 31日

设计与开发

有关其他条款或所需资源,请点击下面的任何链接来查看详情页面。

硬件开发

评估板 下载
document-generic 用户指南
说明

The Universal OPAMPEVM is a series of general purpose blank circuit boards that simplify prototyping circuits for a variety of IC package types. The evaluation module board design allows many different circuits to be constructed easily and quickly. Five models are offered with each targeted for (...)

设计工具和仿真

仿真模型 下载
SLOJ117.ZIP (1 KB) - PSpice Model
仿真工具 下载
document-generic 用户指南 document-generic 下载英文版本 (Rev.A)
计算工具 下载
模拟工程师计算器
ANALOG-ENGINEER-CALC — 模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。
特性
  • 通过模数转换器 (ADC) 和数模转换器 (DAC) 加快电路设计
    • 噪声计算
    • 常见单位转换
  • 解决常见的放大器电路设计问题
    • 使用标准电阻器进行增益选择
    • 滤波器配置
    • 常见放大器配置的总噪声
  • 执行 PCB 寄生计算(例如 R、L 和 C)
  • 查找常见传感器的传感器输出值(例如 RTD、热电偶)
  • 解决常见无源电路问题(例如使用无源组件的分压器)

CAD/CAE 符号

封装 引脚 下载
PDIP (N) 14 视图选项
SOIC (DW) 16 视图选项

订购与质量

支持与培训

可获得 TI E2E™ 论坛的工程师技术支持

所有内容均由 TI 和社区网友按“原样”提供,并不构成 TI 规范。参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持