返回页首

产品详细信息

参数

Number of supplies monitored 1 Threshold voltage 1 (Typ) (V) Adjustable, 2.25, 2.63, 2.93, 4.55 Features Active-low enable, Manual reset, Dual output Reset threshold accuracy (%) 5.4 Output driver type/reset output Active-high, Active-low, Push-pull Time delay (ms) Programmable Rating Catalog Watchdog timer WDI (sec) None Operating temperature range (C) -40 to 125, -40 to 85 open-in-new 查找其它 监督和复位IC

封装|引脚|尺寸

PDIP (P) 8 93 mm² 9.81 x 9.43 SOIC (D) 8 19 mm² 4.9 x 3.9 SOIC (D) 8 19 mm² 3.91 x 4.9 TSSOP (PW) 8 19 mm² 3 x 6.4 VSON (DRB) 8 9 mm² 3 x 3 open-in-new 查找其它 监督和复位IC

特性

  • Power-On Reset Generator
  • Automatic Reset Generation After Voltage Drop
  • Precision Voltage Sensor
  • Temperature-Compensated Voltage Reference
  • Programmable Delay Time by External Capacitor
  • Supply Voltage Range . . . 2 V to 6 V
  • Defined RESET Output from VDD ≥ 1 V
  • Power-Down Control Support for Static RAM With Battery Backup
  • Maximum Supply Current of 16 µA
  • Power Saving Totem-Pole Outputs
  • Temperature Range . . . Up to –55°C to 125°C
open-in-new 查找其它 监督和复位IC

描述

The TLC77xx family of micropower supply voltage supervisors provide reset control, primarily in microcomputer and microprocessor systems.

During power-on, RESET is asserted when VDD reaches 1 V. After minimum VDD (≥ 2 V) is established, the circuit monitors SENSE voltage and keeps the reset outputs active as long as SENSE voltage (VI(SENSE)) remains below the threshold voltage. An internal timer delays return of the output to the inactive state to ensure proper system reset. The delay time, td, is determined by an external capacitor:

td = 2.1 × 104 × CT

Where

CT is in farads
td is in seconds

Except for the TLC7701, which can be customized with two external resistors, each supervisor has a fixed sense threshold voltage set by an internal voltage divider. When SENSE voltage drops below the threshold voltage, the outputs become active and stay in that state until SENSE voltage returns above threshold voltage and the delay time, td, has expired.

In addition to the power-on-reset and undervoltage-supervisor function, the TLC77xx adds power-down control support for static RAM. When CONTROL is tied to GND, RESET will act as active high. The voltage monitor contains additional logic intended for control of static memories with battery backup during power failure. By driving the chip select (CS) of the memory circuit with the RESET output of the TLC77xx and with the CONTROL driven by the memory bank select signal (CSH1) of the microprocessor, the memory circuit is automatically disabled during a power loss. (In this application the TLC77xx power has to be supplied by the battery.)

The TLC77xxI is characterized for operation over a temperature range of –40°C to 85°C; the TLC77xxQ is characterized for operation over a temperature range of –40°C to 125°C; and the TLC77xxM is characterized for operation over the full Military temperature range of –55°C to 125°C.

The 3×3 mm DRB package is also available as a non-magnetic package for medical imaging application.

open-in-new 查找其它 监督和复位IC
下载

技术文档

= TI 精选相关文档
未找到结果。请清除搜索,并重试。 查看所有 5
类型 标题 下载最新的英文版本 发布
* 数据表 MicroPower Supply Voltage Supervisors. 数据表 2012年 3月 19日
技术文章 Don’t underestimate the power of an LDO 2013年 10月 19日
技术文章 How to optimize your DSP power budget 2013年 10月 3日
技术文章 "X" Marks the spot - 7 Treasures in a pirate engineer's treasure chest 2013年 9月 19日
技术文章 Power Tips: How to be discrete 2013年 9月 17日

设计与开发

有关其他条款或所需资源,请点击下面的任何链接来查看详情页面。

设计工具和仿真

仿真工具 下载
PSPICE® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。 

在 PSpice for TI 设计和仿真工具中,您可以搜索 TI 器件、了解产品系列、打开测试台并对您的设计进行仿真,从而进一步分析选定的器件。您还可对多个 TI 器件进行联合仿真,以更好地展现您的系统。

除了一个完整的预加载模型库之外,您还可以在 PSPICE-FOR-TI 工具中轻松访问 TI 器件的全新技术资料。在您确认找到适合您应用的器件后,可访问 TI store 购买产品。 

借助 PSpice for TI,您可使用合适的工具来满足您在整个设计周期(从电路探索到设计开发和验证)的仿真需求。免费获取、轻松入门。立即下载 PSpice 设计和仿真套件,开始您的设计。

入门

  1. 申请使用 PSPICE-FOR-TI 仿真器
  2. 下载并安装
  3. 观看有关仿真入门的培训
特性
  • 利用 Cadence PSpice 技术
  • 带有一套数字模型的预装库可在最坏情形下进行时序分析
  • 动态更新确保您可以使用全新的器件型号
  • 针对仿真速度进行了优化,且不会降低精度
  • 支持对多个产品进行同步分析
  • 基于 OrCAD Capture 框架,提供对业界广泛使用的原理图捕获和仿真环境的访问权限
  • 可离线使用
  • 在各种工作条件和器件容许范围内验证设计,包括
    • 自动测量和后处理
    • Monte Carlo 分析
    • 最坏情形分析
    • 热分析

CAD/CAE 符号

封装 引脚 下载
PDIP (P) 8 了解详情
SOIC (D) 8 了解详情
SON (DRB) 8 了解详情
TSSOP (PW) 8 了解详情

订购与质量

支持与培训

可获得 TI E2E™ 论坛的工程师技术支持

所有内容均由 TI 和社区网友按“原样”提供,并不构成 TI 规范。参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持