返回页首

产品详细信息

参数

Number of channels (#) 4 Total supply voltage (Max) (+5V=5, +/-5V=10) 16 Total supply voltage (Min) (+5V=5, +/-5V=10) 4.4 Rail-to-rail In to V-, Out GBW (Typ) (MHz) 0.71 Slew rate (Typ) (V/us) 0.55 Vos (offset voltage @ 25 C) (Max) (mV) 2.5 Iq per channel (Typ) (mA) 0.2 Vn at 1 kHz (Typ) (nV/rtHz) 12 Rating Catalog Operating temperature range (C) 0 to 70 Offset drift (Typ) (uV/C) 2 Features High Cload Drive Input bias current (Max) (pA) 60 CMRR (Typ) (dB) 83 Output current (Typ) (mA) 2.2 Architecture CMOS open-in-new 查找其它 通用 运算放大器

封装|引脚|尺寸

PDIP (N) 14 181 mm² 19.3 x 9.4 SOIC (D) 14 52 mm² 8.65 x 6 TSSOP (PW) 14 32 mm² 5 x 6.4 open-in-new 查找其它 通用 运算放大器

特性

  • Output Swing includes Both Supply Rails
  • Low Noise...12 nV/Hz\ Typ at f = 1 kHz
  • Low Input Bias Current...1 pA Typ
  • Fully Specified for Both Single-Supply and Split-Supply Operation
  • Low Power...500 uA Max
  • Common-Mode Input Voltage Range Includes Negative Rail
  • Low Input Offset Voltage
  • 950 uV Max at TA = 25°C (TLC2262A)
  • Macromodel Included
  • Performance Upgrade for the TS27M2/M4 and TLC27M2/M4
  • Available in Q-Temp Automotive
    HighRel Automotive Applications
    Configuration Control/Print Support
    Qualification to Automotive Standards

Advanced LinCMOS is a trademark of Texas Instruments.

open-in-new 查找其它 通用 运算放大器

描述

The TLC2262 and TLC2264 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC226x family offers a compromise between the micropower TLC225x and the ac performance of the TLC227x. It has low supply current for battery-powered applications, while still having adequate ac performance for applications that demand it. The noise performance has been dramatically improved over previous generations of CMOS amplifiers. Figure 1 depicts the low level of noise voltage for this CMOS amplifier, which has only 200 uA (typ) of supply current per amplifier.

The TLC226x, exhibiting high input impedance and low noise, are excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC226xA family is available and has a maximum input offset voltage of 950 uV. This family is fully characterized at 5 V and ±5 V.

The TLC2262/4 also makes great upgrades to the TLC27M2/L4 or TS27M2/L4 in standard designs. They offer increased output dynamic range, lower noise voltage and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442. If your design requires single amplifiers, please see the TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment.

open-in-new 查找其它 通用 运算放大器
下载
您可能感兴趣的类似产品
open-in-new 产品比较
与相比较的设备在功能和参数方面完全等同:
OPA4990 正在供货 Quad 1MHz, 40-V rail-to-rail input/output, low-offset-voltage, low-power op amp Pin-to-pin upgrade with improved performance: lower Vos(1.5mV), higher slew rate(4.5V/us) and output current(80mA)

技术文档

= 特色
未找到结果。请清除搜索,并重试。 查看所有 7
类型 标题 下载最新的英文版本 发布
* 数据表 Advanced LinCMOS Rail-to-Rail Op Amps 数据表 2001年 3月 16日
技术文章 What is an op amp? 2020年 1月 21日
技术文章 Designing tiny microphone circuits with the industry’s smallest op amp 2018年 4月 12日
技术文章 How to lay out a PCB for high-performance, low-side current-sensing designs 2018年 2月 6日
技术文章 Low-side current sensing for high-performance cost-sensitive applications 2018年 1月 22日
应用手册 TLC2262 and TLC2264 EMI Immunity Performance 2013年 8月 19日
应用手册 Use of Rail-to-Rail Operational Amplifiers 1999年 12月 22日

设计与开发

有关其他条款或所需资源,请点击下面的任何链接来查看详情页面。

硬件开发

评估板 下载
document-generic 用户指南
说明

The Universal OPAMPEVM is a series of general purpose blank circuit boards that simplify prototyping circuits for a variety of IC package types. The evaluation module board design allows many different circuits to be constructed easily and quickly. Five models are offered with each targeted for (...)

设计工具和仿真

仿真模型 下载
SLOJ079.ZIP (3 KB) - PSpice Model
仿真工具 下载
document-generic 用户指南 document-generic 下载英文版本 (Rev.A)
计算工具 下载
模拟工程师计算器
ANALOG-ENGINEER-CALC — 模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。
特性
  • 通过模数转换器 (ADC) 和数模转换器 (DAC) 加快电路设计
    • 噪声计算
    • 常见单位转换
  • 解决常见的放大器电路设计问题
    • 使用标准电阻器进行增益选择
    • 滤波器配置
    • 常见放大器配置的总噪声
  • 执行 PCB 寄生计算(例如 R、L 和 C)
  • 查找常见传感器的传感器输出值(例如 RTD、热电偶)
  • 解决常见无源电路问题(例如使用无源组件的分压器)

CAD/CAE 符号

封装 引脚 下载
PDIP (N) 14 了解详情
SOIC (D) 14 了解详情
TSSOP (PW) 14 了解详情

订购与质量

支持与培训

可获得 TI E2E™ 论坛的工程师技术支持

所有内容均由 TI 和社区网友按“原样”提供,并不构成 TI 规范。参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持