PCMD3180
- 8-channel PDM microphones simultaneous conversion
- PDM input to TDM or I2S output converter performance:
- 127-dB dynamic range (DR) with high performance 5th order PDM input
- 117-dB dynamic range (DR) with high performance 4th order PDM input
- Channel summing mode, DR performance with high performance 4th order PDM input:
- 120-dB, 2-channel summing
- 123-dB, 4-channel summing
- Programmable PDM clock output :
- 768 kHz to 6.144 MHz
- Programmable output sample rate (fS) :
- 8 kHz to 768 kHz
- Programmable channel settings:
- Digital volume control: –100 dB to 27 dB
- Gain calibration with 0.1-dB resolution
- Phase calibration with 163-ns resolution
- Microphone bias or supply voltage generation
- Low-latency signal processing filter selection
- Programmable HPF and biquad digital filters
- I2C or SPI controls
- Integrated high-performance audio PLL
- Automatic clock divider setting configurations
- Audio serial data interface:
- Format: TDM, I2S, or left-justified (LJ)
- Word length: 16 bits, 20 bits, 24 bits, or 32 bits
- Master or slave interface
- Single-supply operation: 3.3 V or 1.8 V
- I/O-supply operation: 3.3 V or 1.8 V
- Power consumption for 1.8-V supply:
- 2.9 mW/channel at 16-kHz sample rate
- 2.5 mW/channel at 48-kHz sample rate
The PCMD3180 is a high-performance, pulse-density-modulation (PDM) input to time-division multiplexing (TDM) or I2S output converter that supports simultaneous sampling of up to eight digital channels for the PDM microphone input. The device integrates programable digital volume control, a microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for output sample rates up to 768 kHz. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI interface. Additionally, the PCMD3180 supports master and slave mode selection for the audio bus interface operation. These integrated high-performance features, along with the ability to be powered from a single-supply of 3.3 V or 1.8 V, make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications.
The PCMD3180 is specified from –40°C to +125°C, and is offered in a 24-pin WQFN package.
申请了解更多信息
可提供 PurePath™ Console 3、PCMD3180 GUI 和其他设计资源。立即申请
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | PCMD3180 Octal-Channel, PDM Input to TDM or I2S Output Converter 数据表 | PDF | HTML | 2019年 8月 14日 | ||
应用手册 | 所选封装材料的热学和电学性质 | 2008年 10月 16日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
ADC3140EVM-PDK — TLV320ADC3140 四通道、768kHz、Burr-Brown™ 音频 ADC 评估模块
ADC3140EVM-PDK 是一款供用户用于测试 TLV320ADC3140 器件功能的评估模块 (EVM),后者是一款四通道、高性能音频模数转换器 (ADC)。TLV320ADC3140 适用于声控系统、专业麦克风、音频会议、便携式计算、通信和娱乐应用。ADC3140EVM-PDK 与 AC-MB(一种弹性主板,包含在套件中)搭配使用,可为 EVM 提供电源、控制和数字音频数据。
PCMD31XX-DRIVERS — PCMD31xx ADC 系列 Linux 驱动程序支持
Linux 主线状态
Linux 主线中提供:是
可通过 git.ti.com 获取:不适用
其他文件:
(...)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
封装 | 引脚 | 下载 |
---|---|---|
WQFN (RTW) | 24 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。